• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.6
• /
• pp.658-664
• /
• 2013

Bending actuators composed of cellulose with an electrically conducting polymer (CP) are fabricated and their performance is characterized in the air. Two different counter ions, perchlorate and tetrafluoroborate are used as dopant ions in the polyaniline CP processing. CP-cellulose-CP trilayer and CP-cellulose bilayer samples are fabricated with different dopant ions, and their actuation performance is evaluated in terms of tip displacement, blocked force and electrical power consumption along with the humidity level and actuation frequency. The trilayer samples substantially enhanced the tip displacement compared to the bilayer ones. The actuation performance of the trilayer actuator is three times better than that of original cellulose electro-active paper (EAPap) actuator. The displacement and blocked force of CP-EAPap actuators are dependent on the humidity and frequency.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.3
• /
• pp.28-36
• /
• 2014

The kind and the mixing ratio of recovered papers would affect the quality of final recycled paper. In this study, effects of the mixing ratio of various domestic recycled papers (old news print (ONP), old corrugated container (OCC) and coated paper (CP)) on variations in physical properties of paper and its productivity were investigated. When the mixing ratio of CP grade increased, the freeness (CSF) of recycled pulp was increased while paper strength and white water turbidity was decreased. Paper strength was decreased as the percentage of OCC was higher than ONP. When ONP was mixed with OCC, no adverse effect was observed except the increased drainage resistance. It is expected that these results could be utilized as fundamental data to establish regulations for the recovered paper grades according to mixing ratios of different kinds of them.

• Journal of the Korean Magnetics Society
• /
• v.9 no.2
• /
• pp.121-126
• /
• 1999

This paper describes a fabrication of Fe-dispersed hydrophilic magnetic fluid and its application to oil seal in combination with the Nd-permanent magnet. The results are as follows; 1) Using silica coated iron particle of magnetization of 125.5 emu/g (at 10 kOe) and the mean particle size of 100 $\AA$, after multiple adsorption to the surface of silica coated iron particle with oleic acid ion, D.B.S. and T.M.A. ion, hydrophilic Fe-magnetic fluid [70 %(g/∝)Fe, magnetization of 52 emu/g and viscosity of 1450 cp] can be produced by dispersing the iron particle in ethylene glycol solution. 2) The oil seal apparatus consisting of six stages of Nd-permanent magnet (3200 Gauss) and Fe-magnetic fluid [70 %(g/∝) Fe] showed an excellent pressure resistance of 7400 g/$\textrm{cm}^2$ under the gap between shaft and oil seal was 0.2 mm.