• Journal of Navigation and Port Research
• /
• v.32 no.3
• /
• pp.223-228
• /
• 2008

As most of small fishing boats made of FRP have been constructed by experience in Korea, some structural safety problems have been occurred occasionally. To improve the structural strength and reduce the costs for construction and operation, optimum design for small fishing boat was carried out in this study. The weight of fishing boat and the main dimensions of structural members are chosen as objective function and design variables, respectively. By the combination of global and local search methods, a hybrid optimization algorithm was developed to escape the local minima and reduce CPU time in analysis procedure, and finite element analysis was performed to determine the constraint parameters at each iteration step in optimization loop. Optimization results were compared with the real existing fishing boat, and the effects of optimum design were examined from points of view; structural strength, material cost, etc.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.4
• /
• pp.446-455
• /
• 2017

The improvement of resistance performance for the 4.99 ton class fishing boats was shown. The 4.99 ton fishing boats are the most commonly used one in the Korean coastal region. The evaluation of resistance performance was estimated by the Computational Fluid Dynamics (CFD) analysis. The CFD simulation was performed by the validation for various types of bow shapes on the hull. The optimized hull form from the simulation was selected and showed the best resistance performance. This hull type was tested on the towing tank in the National Institute of Fisheries Science (NIFS). The effective horsepower (EHP) was estimated by the resistance test on the towing tank with the bare hull condition. The drag force on the three service speed conditions was obtained for the resistance analysis to power prediction. The measured drag forces are compared with the results from the CFD simulation with one another. As results of the model tests, it was confirmed that the shape of the bow is an important factor in the resistance performance. The effective horsepower decreased about 30% in comparison with the conventional hull form. Also, the resistance performance improved the reduction of required horsepower, which especially contributed to the energy-saving for the fisheries industry. In the CFD analysis, the resistance performance improved slightly. In this case, the ratio of the residual resistance ($C_R$) in the total resistance ($C_T$) was high. Therefore, the CFD analysis was not enough to satisfy with reflection for the free surface and wave form in the CFD procedure. Both model test and CFD calculation in this study can be applied to the initial design process for the coastal fishing vessel.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.2
• /
• pp.97-103
• /
• 2006

The integrated navigation system(INS) for fishing boat which organized the marine radar, global positioning system(GPS) compass, automatic identification system(AIS), echo sounder, GPS and electronic nautical chart(ENC) was manufactured to reduce the marine accidents of fishing boats occurred frequently at coastal and offshore. The application possibility of INS for fishing boat was examined for basic experiments in the sea. Integration display of various information, such as other vessel's behavior, depth, own vessel's position etc. was done to help the operate user who understood the circumstance around own boat. Therefore, the system will be utilized as a useful equipment for safety voyage and fishing work on the fishing ground.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.3
• /
• pp.286-292
• /
• 2017

The Coastal VTS will be continuously constructed to prevent marine traffic accidents in the coastal waters of the Republic of Korea. In order to provide the best traffic information service to the ship operator, it is important to understand the navigation risk factor. In this study, we analyzed the navigational hazards of Gunsan coastal area where the coastal VTS will be constructed until 2020. For this purpose, major traffic flows of merchant ships and density of vessels engaged in fishing were analyzed. This study was conducted by Automatic Identification System (AIS) and Vessel Pass (V-PASS) data. The grid intervals are 10 minute ${\times}$ 10 minute (latitude ${\times}$ longitude) based on the section of the sea. A total of 30 sections were analyzed by constructing a grid. As a result of the analysis, the major traffic flows of the merchant vessels in the coastal area of Gunsan were surveyed from north to south toward Incheon, Pyeongtaek, Daesan, Yeosu, Pusan and Ulsan, and from east to west in the port of Gunsan Port, 173-3, 173-6, 173-8, 183-2, 183-5, 183-8, 183-3, 184-1 and 184-2. As a result of the study, the fishing boats in Gunsan coastal area mainly operated in spring and autumn. On the other hand, the main traffic flow of merchant ships and the distribution of fishing vessels continue to overlap from March to June, so special attention should be paid to the control during this period.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.2
• /
• pp.78-85
• /
• 2006

A survey on the fishing gear for octopus drift-line fishing was done in Gangwon-do, Sacheon, Gyeongnam and Hokkaido, Japan, while a survey on the environments of fishing grounds used data from January to August from the Korea east coast farming forecast system of Donghae Fisheries Research and Development Institute. The present situation of fishing was examined with boats engaging in drift-line fishing from March to August in the coastal waters along Gangneung. The fishing tackle for octopus drift-line fishing was made manually, and the size, shape, and weight of the hook and number of shooting used vary according to the fishing time and region. Lead is used as the material for sinkers. As bait, pork fat with skin is mostly used in Gangwon-do. The temperature of the bottom water layer in the coastal fishing ground of Gangneung from April to June ranges from $3.2-12.4^{\circ}C$, which is the optimal temperature for octopuses. During July and August, the temperature ranges from $5.0-20.6^{\circ}C$. The maximum difference between day and night temperatures reached up to $9.2^{\circ}C$. Salinity is generally stable at $33.2-35.324.6%_{\circ}$, which does not affect the inhabitation of octopuses. The octopus catch reached its peak from May to July, while most octopuses weighed less than 1 kg (76.7%). The results show that it is effective to carry out octopus drift-line fishing up to a depth of 40 meters; and that the maximum number of octopuses per line is obtained with an operation time of six hours.

• Journal of Fisheries and Marine Sciences Education
• /
• v.10 no.1
• /
• pp.31-52
• /
• 1998

In this paper, we analyzed the relationships between the fishing ground formation and the sea condition information, surface, mid and bottom layer temperature that is necessary for fishing point selection of angling to catch squid in the East Sea. There was a little differences between temperature measured by every fishing boat on fishing operating and prompt reports of fishing and sea condition about fishing ground formation of angling. And then the result examined by using SST that is a important information of sea condition for the fishing position selection follows as ; We knew, even if the differencs of sea condition each year, SST with a lot of fishing boats was generally within the extnet of $2^{\circ}C$. But the result examined by the limit time about the temperature of mid and bottom layer for the groups of fishing boats not to measure and for the near sea measurement to be done only within EEZ waters follows as ; About the temperature of 50m layer on early in June and July in operating waters of the group of fishing boats, the fishing ground was formed from $10^{\circ}C$ to $12^{\circ}C$ between warm waters and cold waters, afterwards we can seize that the fishing ground was moving to waters from $5^{\circ}C$ to $8^{\circ}C$ at near of polar front. In the coastal waters, we knew that fishing ground is formed to waters from $10^{\circ}C$ to $12^{\circ}C$ at the southern of polar front about the temperature of 50m layer.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.1
• /
• pp.85-98
• /
• 2023

This study analyzes the importance and implementation of countermeasures to reduce safety accidents that may occur during fishing in coastal gillnet fishing. Safety accidents that may occur in coastal gillnet fishing were classified into 56 measurement items in six areas: slips and trips, contact with machinery, falls, struck by object, musculoskeletal symptoms, and electrical shock. 35 fishermen belonging to coastal gillnet associations in Tongyeong and Namhae were selected as samples, and the importance and implementation of the proposed measurement items were investigated in the field. In addition, the results were evaluated visually by IPA analysis. As a result of the analysis, the importance of struck by object was the highest, and the implementation of slips and trips was the highest. On the other hand, prevention of musculoskeletal damage was found to be the lowest in both importance and implementation. The area with the most significant difference in importance and implementation by the classified area for measurement items was struck by object, and the area with the minor difference was slips and trips. Among the measurement items, the importance is highly recognized, but there are items with low implementation. To improve their level of implementation, countermeasures such as continuous education, economic support, and structural change of fishing boats should be prepared; moreover, policy support activities for implementation should be carried out.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.863-870
• /
• 2023

Ship capsize accidents are common in coastal waters, particularly involving small fishing boats. To prevent there overturing accidents in small fishing boats, their stabilities must be assessed at the initial design step. However, the available information during the initial design step is limited, posing challenges in performing a reliable stability evaluation. Therefore, this study presents a plan to estimate the transverse metacenter (GM) of small fishing boats using parameters such as KM, KG, and TRIM that can be determined at the initial design step. Stability was evaluated by comparing GM with the minimum transverse metacenter (GMmin) specified in the standard safety evaluation criteria for fishing boats. To calculate the required trim value for hydrostatic characteristics using K-SHIP, a stability assessment program provided by the Korea Maritime Safety and Transportation Corporation, the initial trim state is estimated based on the ship lines using the commercial CFD program STAR-CCM+. GM is then calculated by assessing the hydrostatic characteristics in relation to the boat lines using K-SHIP. Furthermore, the stability of the fully loaded state is compared by subtrcating GM from GMmin. One constructed ship is designated as the standard ship, and the stability assessment method proposed in this study is applied to evaluate stability and validate its effectiveness. Consequently, the representative line of a 4.99-ton fishing boat and nine modular lines models derived from it were evaluated, ultimately identifying a relatively superior stability.

• Journal of Fisheries and Marine Sciences Education
• /
• v.9 no.2
• /
• pp.222-235
• /
• 1997

On the basis of the seven species of fish caught by fishing boats with one crewmen belonging to the Iwawada Fisheries Cooperative of Chiba Prefecture, the fishing boats were classified by species with high market values, and the results obtained were reclassified by discriminant function. As a result, the fishing boats were classified into six groups. These six groups are : G1 featuring the main catches of yellowtails ; G2 flounders ; G3 skipjack tunas, G4 squids ; G5 demersal fish, and G6 other miscellaneous species. Furthermore, principal component analysis were carried out on fish catches of the seven species in terms of the value obtained from a catch from the scores of the first, second, third and fourth principal components. The results of analysis show that fishing boats with one crewman can be broadly classified into three groups ; i.e., Groups G1/G2, Groups G3/G4/G5 and Group G6.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.437-440
• /
• 2005

We examined the relationship between the 50m temperature estimated by remote sensing sea surface temperature (SST) and fishing ground (squid fishing ground) detected by nighttime visible channel defense meteorological satellite program (DMSP) I operational linescan system (OLS) images in the East/Japan Sea during 1993-2000. The results are as follows: The numbers of nighttime fishing boat were distributed the highest in October, and the lowest in April during this study. A nighttime fishing grounds have concentrated in the East Korea Warm Current region, coastal regions of Honshu Island, and Polar front region. Fishing grounds have distributed $11-18^{\circ}C$ of estimated 50m temperature from the satellite data. Relationship between estimated 50m temperature and the distributed fisheries boats showed that the north boundaries of fishing grounds have distributed the temperature of below $12^{\circ}C$ from 1996 to 2000 and that of $13-15^{\circ}C$ during 1993-1995 and 1997-1999. Stable fishing grounds appeared near the Korea/Tsushima Strait from January to March. The center of fishing grounds in spring (April-Jun) have moved to the northward than that in winter, and variations appeared largely in winter. In summer (July-September), center of fishing grounds have formed near the Uleung Island in the south east coast of Korea, and in autumn maximum fishing ground appeared in October, the fishing ground southward from November.