• 환경위생공학
• /
• 제12권1호
• /
• pp.49-58
• /
• 1997

A study on the synthesis of zeolite from bituminous coal ESP fly ash as a raw material, which was emitted from the power plant, was carried out to reduce environmental problems and reuse of the industrial wastes. Bituminous coal fly ash was used as the source of silica and alumina. Zeolite was synthesized by hydrothermal reaction in aqueous NaOH solution with sodium aluminate as additive. The objective of this study is to elucidate the effect of several experimental variables on the synthesis of zeolite. The effects of preroasting temperature, mixing speed, leaching alkalinity, and molar ratio of Na$_{2}$O/SiO$_{2}$ and SiO$_{2}$/Al$_{2}$O of the products were investigated. The synthesized zeolite was proved to be NaA, which is known as 4A type, by comparing with SEM images, and X-ray diffraction analysis. And also we know that the transformation of zeolite A take places into other types of zeolites, i.e. Hydroxysodalite, zeolite P, with the variation of leaching alkalinity.

• 한국환경보건학회지
• /
• 제19권1호
• /
• pp.51-56
• /
• 1993

This study was performed to find the ability of bituminous coal fly ash to remove fluoride from water and wastewater at different fluoride concentration, reaction temperature, reaction time and pH. The removal of fluoride is favorable at low concentration, high temperature and acidic pH. With the increase in the initial fluoride concentration, the amount adsorbed increased. Adsorption process was exothermic at pH 2.0. Physisorption process was predominant over pH 2.3, while Chemisorption was under pH 2.3. Fluoride uptake by fly ash was conducted the adherence of fluoride on the active surface sites of adsorbent and its intraparticle diffusion within adsorbent. The values of rate constants of adsorption were 3.028X 10$^{-3}$, 4.715X 10$^{-3}$, 2.88X 10$^{-3}$ (min) and intraparticle diffusion were 1.434X10$^{-3}$, 3.012X10$^{-3}$, 5.635X10$^{-3}$ at each temperatures.

• 한국세라믹학회지
• /
• 제35권2호
• /
• pp.180-184
• /
• 1998

It was examined that the rheological behaviors of fly ash 70wt%-clay 30wt% slip in which nonplastic fly ash was a major component. We have systematically investigated the effects of deflocculant(Tetrasodium pyrophosphate ; Na4P2O7 nH2O Sodium silicate; Na2SiO3) and coagulant(CaSO4) on the rheological behavior of ash-clay slip. Ash-clay slip have been characterized on the basis of the time dependent rheology which was done out by the gel-curve test. Dispersion mechanism of ash-clay slip is the steric stabilization by the Na2SiO3 coating of cenospheres surface. Coagulated slip seems to have the new network structure and shows the gellation behaviors which makes it possible to direct coagulated casting(DCC).

• 한국응용과학기술학회지
• /
• 제32권2호
• /
• pp.240-247
• /
• 2015

석탄회를 NaOH로 용융시킨 후 수열 처리에 의하여 제올라이트 A를 합성하였다. NaOH/석탄회의 비, 용융 온도, $NaAlO_2$의 첨가량, 수열 처리 온도 및 시간이 생성된 제올라이트의 종류와 결정도에 미치는 영향에 대하여 연구하였다. 결정도가 높은 제올라이트의 생성에 필요한 최적의 NaOH/석탄회의 중량비는 1.2, 최적의 용융 온도는 $550^{\circ}C$이었다. 용융된 석탄회로부터 $Si^{4+}$ 와 $Al^{3+}$의 용출은 교반 시간의 영향을 받지 않았다. 생성된 제올라이트의 형태는 첨가한 $NaAlO_2$의 영향을 받는 것으로 나타났다. 적은 양의 $NaAlO_2$를 첨가하면 제올라이트 X가 생성되나 $NaAlO_2$의 양이 증가하면 단일상의 제올라이트 A가 생성되었다. 수열처리 시간과 온도가 증가하면 제올라이트 A는 hydroxysodalite로 변화 하였다. 승온 속도를 낮춰 반응 온도까지의 도달시간을 증가시키면 결정도가 좋은 제올라이트 A를 얻을 수 있었다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.105-110
• /
• 2006

In order to utilize coal fly ash (hereafter : coal ash ) discharged from coal boiler as a material for civil engineering usage such as snow melter or soil improver, we have to prevent leaching hazardous elements such as fluorine boron and heavy metals from the coal ash because the leaching concentrations of some elements in the ash exceed the Japanese standards for environmental soil quality. Through the laboratory experiments and mill trials we confirmed that the leaching concentrations of fluorine, boron and heavy metals were maintained below their environmental standards by mixing with fixation chemicals and curing for a short time.

• 한국환경과학회지
• /
• 제13권2호
• /
• pp.143-148
• /
• 2004

In this paper, the properties of inter - locking block using fly ash are discussed in order to provide economical advantages and improve quality, and protect environment and recycle resources. Fly ash is the by-product of coal in thermal power plant. The experimental parameters are fly ash content, the amount of AE water - reducing agent and mixing proportion of cement mortar. According to the experimental results, the improvement of quality in the side of strength, absorption ratio and freeze - thaw resistance for manufacturing inter -locking block and the curtailment of cost can be achieved in case of 15% of fly ash and 0.3% of AE water- reducing agent are mixed into mortar mixture of 1 :6(C:S).

• 한국환경과학회지
• /
• 제1권2호
• /
• pp.167-175
• /
• 1992

This study was conducted for an efficient utilization of waste fly ash obtained from the power plant. Fly ash was used for synthesizing zeolite. Na-Pl zeolite could be easily synthesized from waste fly ash and showed the potential to remove heavy metal ions. The synthetic zeolite showed good adsorption property for heavy metal much better than raw fly ash and natural zeolites. Na-Pl exhibited the high adsorption efficiency with a maximum value of 260 Pb mg/g and strong affinity for Pb2+ ion. The metal ion selectivity of Na-Pl was determined in a decreasing order : $Pb^{2+}$>$Cd^{2+}$>$Cu^{2+}$+>$Zn^{2+}$>$Fe^{3+}$

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제1권2호
• /
• pp.167-175
• /
• 1997

This study was conducted for an efficient utilization of waste fly ash obtained from the power plant. Fly ash was used for synthesizing zeolite. Na-P1 zeolite could be easily synthesized from waste fly ash and showed the potential to remove heavy metal ions. The synthetic zeolite showed good adsorption property for heavy metal much better than raw fly ash and natural zeolites. Na-P1 exhibited the high adsorption efficiency with a maximum value of 260 Pb mg/g and strong affinity for $Pb^{2+}$ ion. The metal ion selectivity of Na-P1 was determined in a decreasing order : $Pb^{2+}>Cd^{2+}>Cu^{2+}>Zn^{2+}>Fe^{3+}$.

• 환경위생공학
• /
• 제16권1호
• /
• pp.53-60
• /
• 2001

In this study, the heavy metals in tannery sludge were solidified by using cement and power plant fly ash. Solidification characteristics were discussed with the compressive strength and chromium leaching characteristics of solids. The compressive strength of cement mortar was increased by the amount of fly ash up to 24.3~33.8%, which was considered the results of pozzolanic reaction. When the content of fly ash was 20%, cement mortar showed the highest value $295kg/\textrm{cm}^2$ for 28 days curing. At early curing days, solidified chromium tannery sludge solids were showed lower compressive strength because of the retard on the hydration of cement, but the compressive strength was recovered to be more than $140kg/\textrm{cm}^2$ for 28 days curing regardless with the amounts of fly ash. Also, the results of leaching tests by KSM and TCLP method were showed that the solidified chromium sludge have leached out 0.3~2.2% and 11~17%, respectively.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.321-324
• /
• 2004

The discharge of fly ash that is produced by coal-fired electric power plants is rapidly increasing in Korea. The utilization of fly ash in the raw materials would contribute to the elimination of an environmental problem and to the development of new high-performance materials. So it is needed to study the binder obtained by chemically activation of pozzolanic materials by means of a substitute for the exiting cement. This paper concentrated on the strength development according to the kind of chemical activators, the curing temperature, the heat curing time. Also Scanning electron microscopy and X-Ray diffraction analysis show what the reaction products of the alkali activated fly ash are.