• Biomedical Science Letters
• /
• v.3 no.2
• /
• pp.83-88
• /
• 1997

In septic patients, disseminated intravascula. coagulation (DIC) occurs frequently and is a pathologic condition associated with a variety of critical illness. DIC may complicate the already complex clinical situations and contribute to the high mortality. Nevertheless, its pathogenic mechanisms are not completely elucidated. Present study was prospectively designed to understand the pathogenetic mechanisms involved in the development of DIC. 15 rats were subjected to study and according to the aim, they were divided into three groups： group I, control (not treated-endotoxin, n=5)； group II (12 hours after endotoxin injection, n=5)； group III (24 hours after endotoxin injection, n=5). Experimental DIC was induced in rats by a bolus injection of endotoxin (1mg/kg, E. coli serotype 055:B5). Blood was collected by direct puncture of the heart. Platelet count, fibrinogen and plasminogen concentration, antithrombin III, D-dimer and complement components (C3 and C4) were measured in all subjects. In group II and III, there were apparent signs of DIC, including thrombocytopenia, decreased fibrinogen (but increase in group III), reduced C3 and antithrombin III, and elevated D-dimer. These data indicated that endotoxin might induce the activation of several pathways such as coagulation, fibrinolytic and complement cascade, causing DIC and subsequent multiple organ failures. Ultimately, the increased knowledge of the various pathogenetic mechanisms of coagulation activation and fibrinolysis in endotoxin-induced DIC may have prophylactic or therapeutic implications.

• Membrane Journal
• /
• v.12 no.2
• /
• pp.75-89
• /
• 2002

The effect of addition of inorganic salts in polyethersulfone (PES) polymer solution on the membrane formation and ultrafiltartion performance was studied through the thermodynamic and kinetic properties of casting solution. To control the thermodynamic and kinetic properties of casting solution, various inorganic salts $[CaC1_2, LiCl, LiClO_4, ZnC1_2 $and Mg(ClO_4)_2]$ were added in the PES/NMP solution. Variation of membrane morphology and performance of the resulting membranes with change of the salt type and content added in tasting solution were discussed using viscosity, coagulation value, light transmittance measurement, overall membrane porosity, ultrafiltration experiment and cross-sectional SEM image. For all kind of inorganic salts, according as increase of the salt content in casting solution, viscosity is increased, coagulation value becomes lower, top layer thickness below the skin surface is increased, bovine serum albumin(BSA) rejection decreased and pure water flux is increased except $CaC1_2$ and LiCl. In case of $CaC1_2$ and LiCl, it is found that when the salt content is increased, the formation of macrovoids is suppressed and the precipitation rate becomes slow while instantaneous demixing of precipitation type is maintained. However, in case of $LiClO_4$ and $Mg(ClO_4)_2,$ it is found that precipitation rate becomes faster.

• Toxicological Research
• /
• v.25 no.3
• /
• pp.140-146
• /
• 2009

This study was performed to evaluate the toxicity of cadmium selenide for a period of 28 days in Sprague-Dawley rats. Each of 10 healthy male and females rats per group received daily oral administration for 28-day period at dosage levels 30, 300 and 1,000 mg/kg of body weight. Mortality and clinical signs were checked, and body weight, water intake and food consumption were also recorded weekly. There were no dose-related changes in food consumption or urine volume. All animals survived to the end of study with no clinical signs or differences in body weight gain observed when compared with the control group. At the end of study, all animals including control group, were subjected to necropsy. Blood samples were collected for hematology tests including coagulation time and biochemistry analysis. Blood coagulation time and relative organ weight were unaffected by all received doses. White Blood Cell (WBC) counts significantly increased in the 300 mg/kg administered male animal group when compared to the control. Monocyte (MO) value were also increased significantly in both 300 and 1,000 mg/kg male animal group. However, Mean Corpuscular Volume (MCV) were significantly decreased compared with the control in the 1,000 mg/kg dose groups for male and female animals. Mean Corpuscular Hemoglobin (MCH) decreased significantly for female in the 300 and 1,000 mg/kg group compared to the control. Blood biochemical values of Inorganic phosphorus (IP) were significantly increased in both the 300 and 1,000 mg/kg dose groups in male animals when compared to the control. Creatinine (CRE) levels indicated significant increase in kidney function for the female, 30 mg/kg dose group when compared with control. There was a significant decrease in thymus absolute organ weight in the female, 1,000 mg/kg dose group when compared with control. Histopathological findings revealed no evidence of injury related to cadmium selenide except for one case of focal hepatic inflammation in the high dose (1,000 mg/kg) group. One case of lung inflammation was also seen in the control group. Basis on these result, the No Observable Adverse Effect Level (NOAEL) of cadmium selenide was determined to be more than 1,000 mg/kg/day for male and female rats under conditions in this study.

• Textile Coloration and Finishing
• /
• v.26 no.4
• /
• pp.322-330
• /
• 2014

The phospholipid-based MPCE(2-Methacryloxyethyl Phosphoryl Chlorine) copolymer was mixed with wet polyurethane for coating of nylon fabrics. The substitution rate of water in coagulation bath with DMF was changed under control of the size of formed hydrophilic microporous cell enable to manufacture excellent breathable, anti-bacterial and moisture control fabrics. Biocompatible property, vapor permeability, hydrostatic pressure, moisture management and anti-bacterial property were investigated for treated nylon fabrics. In result, increased moisture transmission rates, decreased water resistance and outstanding moisture control property could be confirmed by enhanced hydrophilicity of wet-coated nylon fabric with MPCE copolymer.

• Toxicological Research
• /
• v.33 no.3
• /
• pp.225-231
• /
• 2017

National reference standards (NRSs) for biologics are established through potency estimation by a multi-center joint study of standard materials used in the approval process for national lot release and quality control of vaccines, blood products, and other biologics. In this study, a stability evaluation was conducted to determine whether the potency of NRSs for six blood products was being maintained at a consistent level in Korea. The present study conducted real-time stability tests via in-vivo/in-vitro bioassay on NRSs for blood coagulation factor VIII concentrate (2nd standard), antithrombin concentrate, prekallikrein activator, anti-hepatitis B immunoglobulin, blood coagulation factor IX concentrate, and anti-tetanus human immunoglobulin, as well as a trend analysis using cumulative annual results. The real-time stability test results showed that the mean potency of six NRSs was all within the control limit. In the trend analysis, the potency of NRS for blood coagulation factor VIII concentrate (2nd standard) showed a decreasing trend, while the potency of all other products had been stably maintained. The present study confirmed that the mean potency of NRSs for six blood products had been stably maintained in Korea. The findings of the present study establish a foundation that can ensure the quality of NRSs for biologics in Korea, and it is expected to make a major contribution to the supply of high-quality biologics.

• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.822-829
• /
• 2017

As a method to reduce the total phosphorus in sewage treatment plant, we applied the integral type slow mixing/sedimentation fiber filtration system to compare the control methods for the sewage effluent and the reject water. It was analyzed that about 92.4 kg T-P/day should be removed in order to satisfy the final concentration of phosphorus of 0.2 mg T-P/L, which is reinforced effluent standard. Therefore the total phosphorus removal efficiency should be 96% for sewage effluent and 69.2% for reject water (dehydrated filtrate) respectively. The system operation cost to achieve the target of total phosphorus removal efficiency was assessed. It has been found that the treatment cost of the reject water containing high concentration of phosphorus with a low flow rate is reduced to about 1/2.4 of the coagulant cost and about 1/120 of the electricity cost, compared to that of the sewage effluent treatment. Also the economics of the integral type slow mixing/sedimentation fiber filtration system and the general coagulation and sedimentation system were compared. It was evaluated that the development system was more economical because the installation area of the integral type slow mixing/sedimentation fiber filtration system was about 1/7 smaller than that of the general coagulation and sedimentation system, and the annual operation cost including the required amount of coagulant and electricity cost of the development system was lowered about 1/1.7 than that of the general system.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.6
• /
• pp.69-75
• /
• 2010

Total suspendid solid (TSS) of non point source pollutants in construction site are in higher concentration than others (BOD, COD etc). Also, the TSS concentration is very sensitive to the rainfall intensity in early stage of construction. There are two methods for treatment of non point source pollutants, which are temporary treatment facility and filtering one. But they have disadvantages. Temporary facility system has very low efficiency and filtering system consumes high energy and takes up large footprint. This study shows how prefabricated flocculation/coagulation system is developped to cover the above weakness and evaluation of the system performance in construction site. The prefabricated flocculation/coagulation system has very high treatment efficiency comparing with temporary and filtering system and takes small footprint. Therefore, it expects that the system leads to prevention of pollution near construction site and reduction of public grievance. Proper coagulant dosage and sludge circulation facility application, controlling the height of sludge interfacial are necessary to maximize the system efficiency.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.7
• /
• pp.961-969
• /
• 2015

To investigate the effect of n-3 fatty acid from Bokbunja (Rubus coreanus Miq.) seed oil (BSO), we examined improvement of plasma triglycerides and cholesterol in vivo. Five-week-old ICR mice were divided into five groups of six mice each; Control, high fat diet (HFD) control (negative control), salmon oil control (positive control, HFD+commercial n-3 fatty acid), and BSO experimental groups (HFD+1 g/60 kg BW/d, HFD+2 g/60 kg BW/d). After 4 weeks of BSO treatment, we measured serum triglyceride and cholesterol levels. The levels of low-density lipoprotein/very-low-density lipoprotein-cholesterol, high-density lipoprotein-cholesterol, and total cholesterol were significantly (P<0.05) reduced in the group fed BSO at 2 g/60 kg BW/d compared to the negative control. Levels of triglycerides, which are similar to cholesterol, were also significantly (P<0.05) reduced in the same group. To investigate further, we tested blood coagulation parameters. Prothrombin time (PT) and activated partial thromboplastin time (aPTT) were not significantly different among the five groups according to BSO. However, the 2 g/60 kg BW/d BSO group treated with PT and aPTT showed a tendency to live longer than the negative control. Taken together, BSO might improve blood homeostasis mediated via hypo-lipidemic and anti-coagulation activities.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.4
• /
• pp.303-308
• /
• 2010

Excessive oral and maxillofacial bleeding causes upper airway obstruction, bronchotracheal and gastric aspiration and hypovolemic shock. Therefore, the rapid and correct bleeding control is very important for saving lives in the emergency room. Despite the conventional bleeding control methods of wiring (jaw fracture, wound suture and direct pressure), continuous bleeding can occur due to the presence of various bleeding disorders. There are five main causes for excessive bleeding disorders in the clinical phase; (1) vascular wall alteration (infection, scurvy etc.), (2) disorders of platelet function (3) thrombocytopenic purpura (4) inherited disorders of coagulation, and (5) acquired disorders of coagulation (liver disease, anticoagulant drug etc.). In particular, infections can alter the structure and function of the vascular wall to a point at which the patient may have a clinical bleeding problem due to vessel engorgement and erosion. Wound infection is a frequent cause of postoperative active bleeding. To prevent postoperative bleeding, early infection control using a wound suture with proper drainage establishment is very important, particularly in the active bleeding sites in a contaminated emergency room. This is a case report of a rational bleeding control method by rapid wiring, wound suture with drainage of a rubber strip & iodoform gauze and wet gauze packing, in a 26-year-old male cerebral palsy patient with active oral and maxillofacial bleeding injuries caused by a traffic accident.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.6
• /
• pp.551-556
• /
• 2004

Coagulation process is one of the most important processes in water treatment procedures for stable and economical operation, and coagulant dosing of this process for most plants is generally determined by the jar test. However, this method does not only take a long time to analyze and get the result but also has difficulties in applying to automatic control. This paper shows the feasibility of applying neural network to control the coagulant dosing automatically in water treatment plant. To be specific, the predicted results of the neural network model is shown to be similar to that of jar test. The input variables for learning the neural network are turbidity, water temperature, pH, and alkalinity. Combining the neural network and SCD(Streaming Current Detector) for feedforward and feedback control of injecting coagulant, a rapid change of the raw water quality can be accommodated.