국내에서 생산된 농산물의 방사선 조사유무를 확인하기 위하여 TL을 측정하였다. 모든 시료의 first glow curve는 조사선량이 증가할수록 TL intensity도 증가하는 경향을 보여 주었다. 당근, 생강, 감자, 고구마의 상관계수는 0.8522, 0.9968, 0.9612, 0.9071의 높은 값을 나타내었으며, first glow curve의 최대발광온도점은 $176.16{\sim}190.08^{\circ}C$사이에 있었고, second glow curve는 $143.84{\sim}146.56^{\circ}C$ 사이에서 나타났다. Glow curve ratio 1은 감자와 고구마를 제외하고 모두 0.1보다 작은 수치를 보여 비조사시료로 확인되었으며, 감자(0.1840)와 고구마(0.1655)는 0.1보다 큰 수치를 보였으나 독특한 first glow curve가 나타나지 않은 점으로 보아 비조사시료로 확인되었다. 그리고 모든 시료의 glow curve ratio 2는 0.7159보다 높은 수치를 나타내어 조사시료로 확인되었다. Glow curve의 모양을 분석한 결과 second glow curve의 모양이 first glow curve의 유사하였고, 더 낮은 온도에서 나타났다. 따라서 glow curve ratio와 glow curve의 모양에 의해 정확하게 조사유무를 확인할 수 있었고 TL을 이용하여 방사선 조사된 농산물의 검지가 가능함을 확인할 수 있었다.
본 연구에서는 꼬시래기 산추출물(acid extraction of Gracilaria verrucosa, AEG)을 이용하여 RC-58T/h/SA#4 primary 인체 전립선 암세포에 대한 증식억제 및 apoptosis 유도효과를 밝히고자 하였다. AEG의 처리는 전립선 암세포에서 24시간에서 농도 의존적으로 증식 억제능을 보이는 반면 정상세포에서는 독성을 나타내지 않아 암세포의 증식만을 선택적으로 억제시킴을 확인할 수 있었다. 또한 RC-58T/h/SA#4 세포에서 AEG의 처리는 apoptotic body 형성 및 핵의 형태 변화를 유도하였으며, anti-apoptotic 인자인 Bcl-2 단백질은 감소시키고 pro-apoptotic 인자인 Bax 단백질은 증가시키는 것으로 나타났다. Apoptosis의 유발과 관련된 주요인자인 caspase-3 단백질의 발현은 대조구와 비교하여 AEG를 처리한 군에서 caspase-3의 발현을 농도 의존적으로 증가시키는 것으로 나타났다. 한편, bisphenol A에 의해 비정상적으로 증식된 전립선 암세포에서 AEG의 처리는 유의적인 전립선암세포 성장억제효능을 나타내었다. 본 연구에서는 AEG가 RC-58T/h/SA#4 전립선암 세포에서 암세포 성장억제효과 및 apoptosis 유도효과를 나타낸다는 것을 확인하였으며, 환경호르몬에 의해 증식된 암에 대해서도 성장을 억제할 수 있는 효능을 가지고 있음을 증명하였다.
Objectives: This study was conducted to provide scientific and effective information on phytoncides, which are associated with forest healing, and to activate recreational forests. Methods: The target sites were natural recreation forests, a forest park and an arboretum, and the control sites were three urban parks. The samples were collected at a volume of 6.0 L and a flow rate of 0.1 L/min for one hour using a low volume pump and the solid adsorbent sampling method. The phytoncide compounds adsorbed in the Tenax TA tube were analyzed by a automatic heat desorption unit and GC-MS. Results: By type of recreational forest, the annual concentrations of phytoncide (monoterpene) for the forest park showed the highest concentration with $1.450{\mu}g/m^3$, while those for the arboretum showed the lowest concentration at $0.892{\mu}g/m^3$, and thus the concentration of the forest park was approximately 1.6 times higher than the arboretum. The season showing the highest concentration of phytoncides was summer (June) and the forest park was the highest among the recreational forests. The concentrations of major components for phytoncide showed in descending order: ${\alpha}-pinene$, ${\beta}-pinene$, camphene, 3-carene and limonene. The seasonal concentration of ${\alpha}-pinene$, camphene and ${\beta}-pinene$ by type of recreational forest increased in April, which is characterized by low temperature and humidity, and the seasonal concentration of camphene decreased with higher humidity. The meteorological factors which had the high correlation with the concentration of total terpene were temperature and humidity. $CO_2$ and $O_2$ showed an inverse correlation. Conclusion: The major components of phytoncide were ${\alpha}-pinene$, ${\beta}-pinene$, camphene, 3-carene and limonene in descending order of concentration. Further and systematic study on the chemical nature of individual phytoncides, and on the effect of phytoncides on humans needs to be performed.
선천성 심장질환의 치료에 있어서 그 해부학적인 구조를 올바르게 이해하는 것은 아주 중요하다. 이러한 선천성 심장질환의 구조적인 특징을 이해하는데 있어서 삼차원 프린팅 모델을 이용하는 것은 아주 효과적이다. 기존에 얻어진 전산화단층촬영이나 자기공명영상 혹은 심장 초음파 검사의 자료만으로는 정확한 복잡심장기형의 특징을 이해하는 것이 어려운 경우가 있으며, 삼차원 프린팅 모델의 사용이 이러한 제한점 들을 극복하는데 도움을 줄 수 있다. 최근 들어서는 삼차원 프린팅 모델을 이용해 선천성 심장질환의 교육과 수술 전 시뮬레이션 그리고 치료의 방침을 결정하는데 많은 도움을 받고 있으며, 실제 구체적인 환아들의 예를 통해서 이를 살펴보고자 한다. 또한 향후 그 기술의 발전 방향에 대해 알아보고, 심장외과 의사의 관점에서 수술 수기의 발전이나 훈련 등 여러 방면의 이용에 대해서도 살펴보고자 한다.
본 연구에서는 TCDD에 노출된 랫드에 있어 녹용의 에탄올 추출물(EAV)이 혈액상(complete blood count) 및 임상화학지수(common serum chemistry panels) 및 장기별 조직 병변에 미치는 효과를 구명하기 위하여 수행되었다. 본 연구 결과 TCDD에 노출된 랫드의 혈액상 및 혈액화학적 지수 중 혈소판 수 감소(p<0.01), AST(p<0.01) 및 ALT (p<0.05) 활성 증가, CPK (p<0.01) 및 LDH(p<0.05) 활성 감소, BUN 활성 증가(p<0.05), glucose 함량 감소(p<0.05), lipase 활성 증가(p<0.05), TG(p<0.01) 및 LDH-cholesterol(p<0.05) 함량 증가가 대조군에 비하여 유의하게 변화한 것으로 관찰되었다. 특히 혈소판 수 감소, serum lipase 활성 증가, abdominal lipoprotein lipase(LPL) 활성 저하 및 male에서 serum estrogen 함량 증가는 동물 종과 관계없이 매우 재현성이 있게 나타나는 독성 반응으로 본 실험에서도 대조군 대비 현저한 차이를 보였다. 본 실험에서 TCDD-노출 랫드의 체중 감소는 복부 지방 조직내 LPL 활성 저화와 serum에 존재하는 HSL의 활성 증가와 관련이 있을 것으로 사료된다. 또한 장기별 무게에 있어서도 TCDD는 고환의 무게를 현저하게 감소시켰다(p<0.01). 한편, 녹용의 에탄올 추출물(EAV)은 TCDD에 노출된 랫드에 있어 LDH의 활성 감소(p<0.05), glucose 함량 감소(p<0.05), lipase 활성 증가(p<0.05), 고환 무게 감소(p<0.01)에 대하여 유의하게 억제하는 것으로 관찰되었다. TA군의 흉선은 거의 퇴화되어 CO 흉선 무게의 3.8%에 불과하였다. TCDD에 노출된 랫드에 EAV를 전처리하면 TA군과 비교하여 비록 무게 감소는 유의하게 억제되나 CO군과 비교하면 현저하게 작은 값을 나타냈다(p<0.01). 이상의 결과로 보아 녹용은 랫드에 있어 다이옥신에 의하여 야기되는 일반 혈액화학지수 및 조직 병변에 미치는 효과를 개선시킬 수 있다고 판단한다.
고리를 구성하는 원자의 수가 15개에서 18개인 디아자 크라운계의 고대고리 화합물인 1,12-diaza-3, 4 : 9, 10-dibenzo-5, 8-dioxacyclopentadecane(NtnOenH$_4$), 1,13-diaza-3,4 : 10,11-dibenzo-hydroxy-5,9-dioxacyclohexadecane(NtnOtnH$_4$), 1,13-diaza-3,4 : 10,11-dibenzo-15-hydroxy-5,9-dioxacyclohexadecane(Ntn(OH)OtnH$_4$), 1,15-diaza-3,4 : 12,13-dibenzo-5,8,11-trioxacycloheptadecane (NenOdienH$_4$) and 1,15-diaza-3,4 : 12,13-dibenzo-5,8,11-trioxacyclooctadecane(NtnOdienH$_4$)의 양성자화와 금속이온과의 착물 형성을 전위차적정법과 핵자기 공명법으로 연구하였다. 양성자화상수는 크라운 에테르의 염기도를 예측하는데 상용하였다. 본 연구에서 사용한 거대고리 화합물의 염기도 순서는 NenOdienH$_4$ < Ntn(OH)OtnH$_4$ < NtnOenH$_4$ < NtnOtnH$_4$ < NtnOdienH$_4$였다. 염기도의 이와 같은 변화를 거대고리에 대한 치환기와 양성자화가 일어날 때의 고리의 비틀림 정도로 설명하였다. 금속이온과의 착물 형성에 대한 안전도상수는 전이금속이온에 대해서는 Co(II) < Ni(II) < Cu(II) < Zn(II)순이었으며, 중금속이온에 대해서는 Cd(II) < pb(II) < Hg(II)의 순이었다. 금속 착물 형성에 대한 이와 같은 안정도상수의 변화에는 Co(II), Ni(II) 및 Cu(II) 착물의 경우 리간드 고리의 크기가 영향을 미치고 있었으며, Zn(II), Cd(II), pb(II) 및 Hg(II) 착물의 경우에는 리간드의 염기도가 주로 영향을 미치고 있었다. 후전이금속 착물에 대한 $^1$H와 $^{13}$C 핵자기공명 분광법에서는 고리의 질소원자가 산소원자보다 금속이온에 더 큰 친화력을 가짐을 알 수 있었고, 금속이온과 착물을 형성할 때에 고리의 평면성이 상실되고 있음도 밝혀졌다.
연구배경 : 원인 미상의 미만성 폐침윤이 있는 경우, 기관지폐포세척술(bronchoalveolar lavage; BAL)이 진단에 유용하나, 심한 저산소혈증이 있는 환자에서는 수기 중 저산소혈증의 악화에 대한 우려로 BAL을 시행하지 못하거나 기관내삽관 후 시행하는 경우가 많다. 이에 저자들은 심한 저산소혈증 환자에서 BAL 시행 시 안면마스크를 통한 지속성 기도양압(continuous positive airway pressure; CPAP)을 시행하여, 이 방법의 유용성 및 안정성을 평가하기 위해서 본 연구를 시행하였다. 방법 : 2001년 1월 2000년 8월까지 삼성서울병원에 입원한 환자 중, 진단적 BAL이 필요하면서 심한 저산소혈증(안면마스크로 산소 10 L/min 공급 시 $PaO_2/F_IO_2\;ratio{\leq}200$)이 있는 환자들을 대상으로 하였다. 기존의 인공호흡기와 안면마스크를 이용하여 흡입산소분율 1.0로 CPAP $5{\sim}6cmH_2O$를 BAL 시행 10분 전부터 BAL 종료 30분 후까지 적용하였다. 기관지내시경은 T-튜브를 통해 구강으로 삽입하여 통상적인 방법으로 BAL을 시행하였다. 수기 전, 직후, 수기 후 30분, 90분과 24시간에 여러 생리학적 지표와 가스교환지표들을 측정하였다. 결과 : (1) 총 7명(남:여=4:3)의 환자를 대상으로 하였으며 연령 중앙값은 56세였다. (2) CPAP 적용 전 $PaO_2$는 $78{\pm}16mmHg$였으며 CPAP 적용 후 $269{\pm}116mmHg$으로 유의하게 증가하였으며(p=0.018) BAL시행 후와 30분 후 $PaO_2$의 유의한 감소는 관찰되지 않았다. 수기 중 $SpO_2$가 90% 미만으로 감소한 환자는 한 명도 없었다. (3) 수기 직후 $PaCO_2$의 유의한 증가, pH의 유의한 감소가 관찰되었으나 수기 후 30분만에 회복되었다. (5) 시행 중 출혈, 기흉, 감염, 혈역학적 합병증은 발생하지 않았으며, 세명의 환자(43%)에서 수기와 무관하게 기저 질환의 진행으로 기관내삽관을 필요로 하였다. 결론 : 심한 저산소혈증 환자에서 안면마스크를 이용한 CPAP을 적용하여 BAL을 시행하면, 수기 시 저산소혈증의 위험 없이 안전하게 검사를 시행할 수 있을 것으로 사료된다.
Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
한국분말야금학회:학술대회논문집
/
한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
/
pp.9-10
/
2000
An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.
전기로 제강분진(EAFD : Electric Arc Furnace Dust) 중에 다량 함유되어있는 아연을 회수하기 위한 재활용 기술로서, 현재 세계적으로 가장 많이 상용화된 기술은 Wealz Kiln Process이다. Wealz Kiln Process에서는, 제강분진 중의 Zn, Pb 등과 같은 성분들을 고온의 Kiln에서 환원/휘발(흡열반응)시킨 후에 다시 기체상에서 재산화(발열반응)시켜 후단에 설치된 Bag Filter에서 조산화아연(60wt%Zn)의 형태로 회수하는 프로세스이다. 본 연구에서는, 상업용 규모의 대형 kiln의 재활용 공정에 실제로 적용하기 위한 최적의 공정변수 값을 조사하기 위해서, 실험용 Wealz kiln을 제작하였다. 그리고, 전기로 제강분진과 환원제, 석회석을 혼합한 Pellet을 연속적으로 Kiln에 장입하면서, 조산화아연 회수율을 얻기 위한 최적의 장입량과 가열온도, 체류시간 등을 조사하였다. 또한 Pellet의 최적의 제조조건( Drum 경사각, 수분의 첨가량, 혼합시간 등)도 조사하였다. 또한, SiO2-CaO-FeO 3성분계 상태도를 참고하여, Pellet의 염기도(basicity)의 변화에 따른 Kiln 내부에서의 저융점 화합물의 생성거동과 Kiln내벽에 시공된 Castable과의 반응성(부착성)을 평가하여 보았다. 그리고, 환원제인 Coke의 대체제로서 무연탄의 사용 가능성을 실질적으로 평가하기 위하여, 무연탄의 첨가량 증가에 따라서 산화/환원반응이 일어나는 Kiln 내부의 온도분포변화, 조산화아연의 품위, 무연탄 중의 타르(Tar)의 거동에 대해서도 조사하였다.
킬라우에아 화산 정상 분화구는 16세기 이래로 계속적이고도 간헐적인 분출활동을 통하여 형성되어진 화산으로서 1790년부터 1982년 9월까지 분출된 현무암의 체계적인 연도별 시료채취를 바탕으로 미량원소와 희토류원소의 특징을 고찰하였다. 주요 정출광물로는 감람석, 단사휘석, 사장석이 있으며 소량의 불투명광물인 크롬스피넬, 티탄철석이 관찰된다. Zr, V, Y, Ti 등과 같은 미량원소들은 MgO로 나타나는 감람석에 대해서 불호정성을 나타내며 Ni, Cr, Co 는 감람석에 대해서 매우 강한 호정성을 나타낸다. Ba, Rb, Th, Sr, Nd 원소들은 불호정성을 나타내어 $K_2O$와 정(+)의 관계를 뚜렷이 나타낸다. 희토류원소를 콘드라이트에 표준화시킨 REE도표에서 LREE가 HREE보다 더 부화된 패턴을 보이는 전형적인 화산호현무암(OIB)을 지시한다. Si에서 약간의 변곡 현상으로부터 소량의 사장석 분별결정작용에 Sr이 관여한 것을 확인할 수 있었다. Y/Ho, Zr/Hf 비로부터 마그마로 유입되는 외부적인 유체(해수 혹은 지하수)의 영향을 고려해 보았을 때 유체의 영향은 거의 나타나지 않았으며 Zr/Hf에서 푸오오(PuuOo)분출암과 킬라우에아(Kilauea)정상 분화구 분출 현무암과의 뚜렷한 차이를 발견하였다. 분출 시대별 미량원소의 함량변화를 관찰하였으며 특히 1921년에서 1954년 사이 동안에 마그마 성분의 급작스런 변화에 의해 그 이전의 대체로 증가하던 미량원소의 함량이 감소하는 경향으로 바뀌게 되었다. 이러한 경향은 킬라우에아 정상 분화구의 분출이 끝나고 계속된 푸오오 분출 현무암의 미량원소의 거동 또한 감소하는 경향을 따르고 있다. 1924년 할레마우마우 분화구가 함락 붕괴되어 지각성분의 마그마 저장소로의 유입과 마그마 저장소 아래에서 공급되는 모마그마의 성분변화에 의해서 미량원소 함량이 급격하게 변한 것으로 해석된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.