• 한국식생활문화학회지
• /
• 제18권2호
• /
• pp.181-191
• /
• 2003

This study was carried on the oxidative stability and the real practice possibilities in cooking of fat replacer MCT. Nowadays, it was known that fats and oils had become causes for cardiac disease, obesity and cancer, so the new materials were needed for fat substitute that has less fat contents and low calories. The food industry concerned about fats and oils had been researched and developed new and various kinds of substitute fats. MCT(medium chain triglycerides) is one of the fat based fat substitutes used as fat replacers. The POV of com germ oil(CO), soybean oil(SO), shortening(ST), butter(BT), their blended oil with MCT 10-50%(w/w), and MCT were determined and oxidative stability by POV was compared MCT with those of them. MCT has shown higher oxidative stability than CO, SO, ST, BT, so oxidative stabilities in all kinds of blended oils become higher and higher by the increased substitution ratios. In case of bread, the volume of bread prepared with MCT(MCT bread) substituted for ST at 10-40% level(w/w) were increased a little comparing to that made of shortening(ST bread). But degree of gelatinization of MCT bread were a little lower than ST bread, at the substitute ratio above 40%, the degree of gelatinization were reduced greatly. These phenomena were sustained in 9 stored days. While baking losses of MCT breads were almost same as ST bread until 30% substitute ratio, and the appearances of MCT breads were similar to ST bread until 40% substitute ratio. Also rheological properties and color(Lab) of MCT breads had shown no different significantly from ST bread until 20% substitute ratio, but by the results of sensory evaluation, overall acceptance including appearance, color, flavor, taste, texture of MCT breads were recognized almost same as ST bread by panel until 40% substitute ratio. Depends on the above results, we can suggest that 30-40% of MCT will substitute for shortening in making bread in order to reduce fat and calories intake amounts.

• 대한임상검사과학회지
• /
• 제36권1호
• /
• pp.43-48
• /
• 2004

Cerebral vasoreactivity is an index of autoregulation of cerebral perfusion, and can be measured using functional images such as Xe CT, SPECT and PET in reponse to hypercapneic stimulus. In order to measure cerebral $CO_2$ vasoreactivity in routine TCD study conveniently and reliably, we devised a method of rebreathing into closed volume of reservoir bag as a hypercapneic stimulus, and applied it to 44 healthy volunteers. As a hypercapneic stimulus, we applied fitting mask connected with closed reservoir bag for about 90 seconds, and mean blood flow velocity(MBFV) and pulsatility index(PI) were evaluated at proximal middle cerebral arteries(MCA) of 50-55 mm depth, before and after the hypercapneic stimulus. Age affected the MFV and PI value showed significant and the MFV was 56.45(SD=9.75)cm/sec, while PI was 0.406(SD=0.089). As age increases the flow velocity decreased significantly whereas PI value increased(P<0.05). The vasoreactvity significantly decreased with age(P<0.05). The decrease of cerebral blood flow quantity and cerebral blood flow velocity is not only because of increase of diameter of cerebrovascular resulting from aging, but the resistance increase of small blood vessel resulting from the increase of PI & RI value is regarded. We suppose that the rebreathing method is a reliable and convenient technique as a hypercapneic stimulus in determining cerebral $CO_2$ vasoreactivity. The rebreathing method could be non-invasive and useful methods in estimation of the cerebrovascular reactivity and could be applied to the basal and follow-up evaluation of the cerebrovascular reserve of the ischemic stroke patients.

• 한국표면공학회지
• /
• 제42권3호
• /
• pp.128-132
• /
• 2009

Transparent conducting thin films of indium tin oxide(ITO) co-sputtered with aluminum-doped zinc oxide(AZO) were deposited on glass substrate by dual magnetron sputtering. It was found that the electrical properties and structural characteristics of the films are significantly changed according to the sputtering power of the AZO target. The IAZTO film prepared with D.C power of ITO at 100 W and R.F power of AZO at 50 W shows an electrical resistivity of $4.6{\times}10^{-4}{\Omega}{\cdot}cm$ and a sheet resistance of $30{\Omega}/{\square}$ (for 150 nm thick). Besides of the improvement of the electrical properties, compared to the ITO films deposited at the same process conditions, the IAZTO films have very smooth surface, which is due to the amorphous nature of the films. However, the electrical conductivity of the IAZTO films was found to be deteriorated along with the crystallization in case of the high temperature deposition (above $310^{\circ}C$). In this work, high quality amorphous transparent conductive oxide layers could be obtained by mixing AZO with ITO, indicating possible use of IAZTO films as the transparent electrodes in OLED and flexible display devices.

• Journal of Pharmaceutical Investigation
• /
• 제26권1호
• /
• pp.29-32
• /
• 1996

In vivo and in vitro skin permeation of $recombinant^{125}$ I-EGF through normal, stripped and the first degree burn skin were studied. The in vitro skin permeation rate through the first degree burn skin $(296\;cpm/cm^2/hr)$ and the stripped skin $(1131\;cpm/cm^2/hr)$ were 3.5 times and 13 times higher, respectively, as compared with the one through normal skin. In vivo absorption study with the first degree burn skin, the peak concentration of EGF in the skin was achieved at 1-3 hr and decreased afterward up to 8 hr with an elimination constant of $1.31{\times}10^{-3}\;g/ml/hr$. To investigate the higher elimination rate of EGF in burn skin, binding and metabolism studies were conducted. No significant metabolism of EGF in burn skin $(100^{\circ}C,\;5-second\;burning)$ was observed. With the presence or unlabelled-EGF $^{125}I-EGF$ permeation through the burn skin showed higher permeation rate than the one without unlabelled-EGF. The result nay indicate that EGF-receptor binding play a role in determining the skin permeation rate.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2004년도 제20회 발표논문집
• /
• pp.137-153
• /
• 2004

We have analyzed the ingredients of 17 pieces of Bronze Age bronze ware, and an additional 22 pieces of Koryo and Chosun dynasty bronze ware. We have also conducted analysis of the extraction sites where these bronze ware items were found. For analyzing the main ingredient the bronze ware items have been divided into 3 groups - Cu-Sn(70?75:20), Cu-Pb-Sn(70:10:10), Cu-Pb-Sn(60:10:20) type respectively. In tile cases of the Cu-Pb-Sn groups the division comes down to differences in the Cu content as the main component, and elements such as Ni, Fe, Co contribute as a micro ingredient. The geographical and periodic characteristics of ancient bronze ware items show that theircompositional element changes from Cu:Sn to Cu:Pb:Sn and the Cu content decreases with the period,while the Pb content increases with the period. Bronze ware items from Suchon Ri, Gongju (that were used in 3 B.C.) form very different categories from 3rd ${\~}$ 2nd B.C.. They additionally formed very different categories from those bronze ware items analyzed in this research. These bronze ware itemsare shown to be geographically close and periodically overlapped, but made of a new elemental composition. This shows an inflow of a production technical culture present in the new bronze wares. The main component content of Cu is lower, and the Co and Fe contents (as microelements) are much higher than that of other bronze ware items. Such facts showthat those bronze ware items used completely different materials from bronze ware items in other cultural areas, or that there were differences in smelting techniques In the places where ancient bronze ware items have been extracted, it is presumed that the materials originated from the southern parts of Korea andnorthern parts and southern parts of China. .As more bronze ware scientific research is compiled one can conclude that that there will be enough scientific evidence to study the Bronze Age culture of Koreasystematically.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.301-303
• /
• 2018

서비스 로봇에서는 산업용 로봇에서 많이 사용하던 로봇 머니퓰레이터 대신에 여유자유도형 인간형 로봇 팔이 사용어야한다. 여유자유도 인간형 로봇팔은 산업용 로봇 팔에 비하여 자유도 수가 많아서 특이점 및 장애물 회피에 더욱 우수한 성능을 가지고 있어 정해지지 않은 복잡한 환경에서 동작해야 하는 서비스 로봇에 적합하다. 여유 자유도 로봇 팔의 제어 문제는 구동 알고리즘에서 역기구학 및 자코비언을 사용하기 때문에 복잡한 연산 및 그 계산량이 많다는 것이 문제가 된다. 본 연구에서는 이러한 문제를 해결하기 위해 수치해석적인 역기구학 해법 및 가중 의사역 행열 제어 알고리즘을 제안하며 이를 시스템으로 구현하여 실험으로 효용성을 입증하였다.

• Elastomers and Composites
• /
• 제54권4호
• /
• pp.345-350
• /
• 2019

In this study, aliphatic polyketone (PK)/chopped carbon fiber (CCF) composites with various CCF contents were prepared using a modular intermeshing co-rotating twin screw extruder, and their mechanical and thermal properties such as tensile, flexural, and impact strength and thermal conductivity were investigated. The amount of CCF was increased from 0 to 50 wt%. The tensile and flexural strength of the PK/CCF composites increased as the CCF content increased, but the elongation at break and impact strength was lower than that of pure PK. Thermal properties such as heat distortion temperature and thermal conductivity increased as the CCF content increased. Morphological observations revealed that fiber orientation and interface adhesion between the PK and the CCF in the PK/CCF composites were formed due to the twin screw extrusion, which contributed to improving the mechanical and thermal properties of the composites.

• BMB Reports
• /
• 제54권5호
• /
• pp.278-283
• /
• 2021

Our understanding of the differential effects between specific omega-3 fatty acids is incomplete. Here, we aimed to evaluate the effects of docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) on T-helper type 1 (Th1) cell responses and identify the pathways associated with these responses. Naïve CD4⁺ T cells were co-cultured with bone marrow-derived dendritic cells (DCs) in the presence or absence of palmitate (PA), DHA, or EPA. DHA or EPA treatment lowered the number of differentiated IFN-γ-positive cells and inhibited the secretion of IFN-γ, whereas only DHA increased IL-2 and reduced TNF-α secretion. There was reduced expression of MHC II on DCs after DHA or EPA treatment. In the DC-independent model, DHA and EPA reduced Th1 cell differentiation and lowered the cell number. DHA and EPA markedly inhibited IFN-γ secretion, while only EPA reduced TNF-α secretion. Microarray analysis identified pathways involved in inflammation, immunity, metabolism, and cell proliferation. Moreover, DHA and EPA inhibited Th1 cells through the regulation of diverse pathways and genes, including Igf1 and Cpt1a. Our results showed that DHA and EPA had largely comparable inhibitory effects on Th1 cell differentiation. However, each of the fatty acids also had distinct effects on specific cytokine secretion, particularly according to the presence of DCs.

• 한국응용과학기술학회지
• /
• 제39권1호
• /
• pp.132-145
• /
• 2022

국내 농업 분야 비산먼지의 배출계수와 활동도 자료는 국내의 환경조건(풍속, 습도 등)과 농업의 특성을 반영하지 않고 미국의 인벤토리 체계를 그대로 적용해 왔다. 이 연구에서는, 활동 자료 중 하나인 시간 해상도는 풍속 및 건기일수 적용을 통해 월별 배분계수를 도출하여 지역별로 시간 해상도를 향상시켰고, 공간 해상도는 시·군·구에서 동과 리로 세분화하여 지역별로 공간 해상도를 향상시켰다. 이 연구를 통해, 지금 존재하는 농업분야의 비산먼지의 배출량, 활동도 자료의 개선에 중요한 자료로 활용될 수 있을 것으로 판단된다.

• 한국미생물·생명공학회지
• /
• 제51권1호
• /
• pp.43-52
• /
• 2023

The purpose of this study is to confirm the antioxidant, black hair, and hair growth effects of the N. jatamansi, O. basilicum, and C. sativus mixed extracts that pharmacological efficacy has been verified. Accordingly, four samples (NOC-1 to-4) produced under different extraction conditions were prepared and the results are as follows. First, all samples showed an increase in antioxidant content in a concentration-dependent manner from the results of antioxidant efficacy. In particular, NOC-4 extracted by steaming and ultrasonic methods showed the highest antioxidant effect among the four samples. As a result of analysis of the amount of melanin production in mouse melanoma cells, NOC-4 with concentration of 500 ㎍/ml showed higher melanin production compared to the control group, so the black hair efficacy was the best. Also, in the hair growth test results, it was found that the hair growth was the best at 0.94 ± 0.10 mm at experimental group orally administered with 500 mg/kg of NOC-4. In addition, as a result of cytotoxicity analysis in mouse melanoma cells, the safety of samples was demonstrated by maintaining cell viability of 95% or more at all concentrations. These results suggest that the steaming and ultrasonic extraction method increased the extraction yield of active ingredients for antioxidant, melanin, and hair generation, thereby affecting physiological activity. Based on these results, if the steaming and ultrasonic extraction methods are applied to the mixed extraction of N. jatamansi, O. basilicum, and C. sativus, it is judged that the practical potential as a natural material for black hair and hair growth agents will increase.