• Journal of Communications and Networks
• /
• v.4 no.4
• /
• pp.336-343
• /
• 2002

A major challenge for next generation mobile communication is capturing the system architecture’s complexity with all its internal and external dependencies. Seamless integration of heterogeneous environments in all system parts is a key requirement. Moreover, future systems have to consider the different evolution cycles of individual system parts. Among those, services are expected to change the fastest. With respect to these considerations, we propose an overall architecture for next generation mobile communication systems. It covers all system parts from wireless transmission to applications including network and middleware platform. Our approach focuses on adaptability in terms of recon- figurability and programmability to support unanticipated system evolution. Therefore, we consider abstraction layers which consist of adaptable cooperating components grouped by open platforms rather than rigid system layers. In addition to that, we introduce cross-layer cooperation allowing an efficient use of the available resources. Specific scenarios illustrate the feasibility of our approach.

• Proceedings of the PSK Conference
• /
• 2000.04a
• /
• pp.106.1-106.1
• /
• 2000

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.47-48
• /
• 2015

As the power system develops rapidly into a smarter and more flexible state, so must the communication technologies that support it. Machine to machine (M2M) communication in Smart Grid environment has been discussed in European Telecommunications Standards Institute (ETSI). The power system is not easily replaceable, due to system replacement cost. The M2M gateway is required in other to improve interoperability in M2M environment. The Distributed Network Protocol 3.0 (DNP3.0) is the most important standard in the SCADA systems for the power. It has been used for device data collection/control in Substation Systems, Distribution Automation System. If the DNP3.0 data model is combined with a set of contemporary web protocols, it can result in a major shift. We selected Constrained Application Protocol (CoAP) based on RESTful as M2M protocol. It is a specialized web transfer protocol for use with constrained nodes and constrained networks. We have used the OPNET Modeler 17.1 in order to verity the SOAP versus CoAP. In this paper, we propose the CoAP-based M2M Gateway to Distribution Automation system using DNP3.0 in Smart Grid Environment.

• Journal of Nutrition and Health
• /
• v.35 no.2
• /
• pp.207-212
• /
• 2002

Acetyl-CoA carboxylase (ACC) is the enzyme that controls no devo fatty acid biogynthesis, and this enzyme catalyzes the carboxylation pathway of acetyl-CoA to malonyl-CoA. Acetyl-CoA carboxylase gene expression was regulated by nutritional and hormonal status. The present study was performed to identify the regulation mechanism of ACC gene promoter I. The fragments of ACC promoter I -1.2-kb region wert recombined to pGL3-Basic vector with luciferase as a reporter gene. The primary hepatocytes from the rat were used to investigate the hormonal regulation of ACC promoter I activity. ACC PI (-1.2)/Luc plasmid was trtransferred into primary hepatocytes using lipofectin. Activity of luciferase was increased two-fold by 10-9M, three-fold by 10-8M, 10-6M, 3.5-fold by 10-6M, and 4.5-fold by 10-7M insulin treatment, respectively. In the presence of dexamethasone (1 $\mu$M), the effects of insulin increased about 1.5-fold, showing the additional effects of dexamethasone. Moreover, the activity of luciferase increased with insulin+dexamethasone, insulin+T3, dexamethasone+T3, and dexamethasone+insulin+T3 treatment approximately 6-, 4-, 6.5-, and 10-fold, respectively. Therefore it can be postulated that 1) these hormones coordinately regulate acetyl-CoA caroxylase gene expression via regulation of promoter activity, 2) the -1.2-kb region of ACC promoter I may have the response element sequences for insulin, dexamethasone, and T3.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.2
• /
• pp.134-140
• /
• 1998

Eubacterium limosum KIST612 was cultured on phosphate-buffered basal medium (PBBM) with carbon monoxide (CO) as the sole energy and carbon source. The initial growth rate of this strain was approximately 0.17~0.25 $h^-1$/ and the $K_s$ value for dissolved substrate was 0.14 mM. CO was limiting during the growth of the bacterium when the CO partial pressure was less than 0.6 atm (0.5 mM dissolved CO). The bacterial growth rate was reduced in the presence of acetate. When sufficient CO was supplied using a gas-lift reactor, the acetate concentration went up to 90 mM in 116 h. Based on these findings, it is suggested that a pressurized reactor be used to develop a process to convert CO-rich gases into multi-carbon compounds.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.72-80
• /
• 1992

Group 6 $M(CO)_4$(2, 2'-bipyridine)[M=Cr, Mo, W] was synthesized by substituting CO ligand of $M(CO)_6$ with strong electron donating ligand, 2, 2'-blpyridine, in the presence of phase transfer catalyst. The effective of catalyst and solvent on the product yield were discussed according to concentration and kinds of catalyst, kinds of center cation and anion, type of alkyl and aryl groups attached to the center cation, and different chain length.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.3
• /
• pp.261-266
• /
• 2010

Human body is hard to be in perfect balance during walking. Most of time the trunk is supported by one leg and the center of mass(COM) falls to the contralateral side. Thus, dynamic variables such as the velocity of the COM should be considered when gait stability is evaluated. The purpose of this study was to investigate whether the extrapolated center of mass(XCom) which utilized the COM position and its velocity, is appropriate to evaluate gait stability. Ten healthy adults participated in this study and performed 3 different types of gaits(normal(NG), hands on waists(HWG), and hands on shoulders(HSG)) onto 4 different types of obstacle(obstacle height: 0%, 30%, 40% and 50% of leg length). Medio-lateral Com-CoP and XCom-CoP inclination angle were calculated during support phase. For all condition, greater M-L XCoM-CoP inclination angles were found(p<.05) compared with those of matched obstacle height CoM-CoP. Especially, M-L XCoM-CoP inclination angle at 50% height revealed the best condition for monitoring dynamic stability. Significantly increased in M-L XCoM-CoP inclination angle was found(p<.05) as obstacle height increased on NG and HWG.

• Journal of Ecology and Environment
• /
• v.29 no.1
• /
• pp.23-27
• /
• 2006

This study was conducted to evaluate forest carbon cycling and soil $CO_2$ efflux rates in a 42-year-old pine (Pinus densiflora) stand located in Hamyang-gun, Korea. Aboveground and soil organic carbon storage, litterfall, litter decomposition, and soil $CO_2$ efflux rates were measured for one year. Estimated aboveground biomass carbon storage and increment in this stand were $3,250gC/m^2\;and\;156gC\;m^{-2}yr^{-1}$, respectively. Soil organic carbon storage at the depth of 30 cm was $10,260gC/m^2$ Mean organic carbon inputs by needle and total litterfall were $176gC\;m^{-2}yr^{-1}\;and\;235gC\;m^{-2}yr^{-1}$, respectively. Litter decomposition rates were faster in nne roots less than 2 mm diameter size ($<220\;g\;kg^{-1}yr^{-1}$) than in needle litter ($<120\;g\;kg^{-1}yr^{-1}$). Annual mean and total soil respiration rates were $0.37g\;CO_2m^{-2}h^{-1}$ and $2,732g\;CO_2m^{-2}yr^{-1}$ during the study period. A strong positive relationship existed between soil $CO_2$ efflux and soil temperature (r=0.8149), while soil $CO_2$ efflux responded negatively to soil pH (r=-0.3582).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.325-328
• /
• 2002

We developed a high performance 2.2" active matrix OLED display for IMT-2000 mobile phone. Scan and Data driver circuits were integrated on the glass substrate, using low temperature poly-Si(LTPS) TFT CMOS technology. High efficiency EL materials were employed to the panel for low power consumption. Peak luminescence of the panel was higher than 250cd/$m^2$ with power consumption of 200mW.

• Clinical and Experimental Vaccine Research
• /
• v.12 no.2
• /
• pp.116-120
• /
• 2023

Purpose: In Japan, the data on severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) antibody titers after the booster dose of the coronavirus disease 2019 (COVID-19) vaccine are insufficient. The aim of this study is to evaluate changes in SARS-CoV-2 antibody titers before, 1, 3, and 6 months after the booster dose of the BNT162b2 COVID-19 vaccine among health care workers. Materials and Methods: A total of 268 participants who received the booster dose of the BNT162b2 vaccine were analyzed. SARS-CoV-2 antibody titers were measured before (baseline) and at 1, 3, and 6 months after the booster dose. Factors associated with changes in SARS-CoV-2 antibody titers at 1, 3, and 6 months were analyzed. Cutoff values at baseline were calculated to prevent infection of the omicron variant of COVID-19. Results: The SARS-CoV-2 antibody titers at baseline, and 1, 3, and 6 months were 1,018.3 AU/mL, 21,396.5 AU/mL, 13,704.6 AU/mL, and 8,155.6 AU/mL, respectively. Factors associated with changes in SARS-CoV-2 antibody titers at 1 month were age and SARS-CoV-2 antibody titers at baseline, whereas changes in SARS-CoV-2 antibody titers at 3 and 6 months were associated with the SARS-CoV-2 antibody titers at 1 month. The cutoff values of the SARS-CoV-2 antibody titers at baseline were 515.4 AU/mL and 13,602.7 AU/mL at baseline and 1 month after the booster dose, respectively. Conclusion: This study showed that SARS-CoV-2 antibody titers increase rapidly at 1 month after the booster dose of the BNT162b2 vaccine and begin to decrease from 1 to 6 months. Hence, another booster may be needed as soon as possible to prevent infection.