• Journal of Adhesion and Interface
• /
• v.8 no.3
• /
• pp.28-33
• /
• 2007

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.466-469
• /
• 2009

The life time of AMOLED displays has been dependent on OLED materials up to this point. In particular, image sticking (burn-in) has been one of the most critical issues for AMOLEDs. This paper proposes image sticking compensation AMOLED pixel circuits to address the problem without requiring process or material improvements to the OLED itself. We verified the performance of those circuits by simulation and actual panel implementation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1661-1663
• /
• 2007

The contrast of display is one of the important specifications. Even if the contrast indicates luminance range which is a capability of the display and is greater in lower luminance or higher luminance, we consider that the greater contrast gets not the better performance. It is not the same value in human visual system. In practice, it is difficult to achieve the full dynamic range seen by human beings using electronic equipment. Therefore, we consider ambient condition and human perception to calculate perceptual contrast using the CIECAM02. In this paper, we propose perceptual contrast that is calculated using the brightness of CIECAM02.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.831-833
• /
• 2004

A novel transflective-type LC mode with good display performance has been developed In order to drive both transmissive and reflective modes simultaneously without any modulation of gamma in a single-gap structure, we have introduced a new design concept in the reflective region, where the capacitance is separated into liquid crystal($C_{LC}$} and organic layer($C_{OL}$), playing a key role as a voltage divider in our cap-divided VA-mode. With this cap-divided method having both merits of simplifying process and good legibility, we have achieved good optical characteristics such as high contrast ratio and wide viewing angle in a single-gap homeotropic panel design.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1154-1157
• /
• 2006

Organic thin-film transistors (OTFTs) based on a semiconducting polymer have been fabricated using an organic patterning methodology. Laser assisted lift-off (LALO) technique, ablating selectively the hydrophobic layer by an excimer laser, was used for producing a semiconducting polymer channel in the OTFT with high resolution. The selective wettability of a semiconducting polymer, poly (9-9-dioctylfluorene-co-bithiophene) (F8T2), dissolved in a polar solvent was found to define precisely the pattering resolution of the active channel. It is demonstrated that in the F8T2 TFTs fabricated using the LALO technique and is applicable for the larger area display.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1462-1465
• /
• 2009

Because of its weak points that narrow viewing angle and grayscale inversion, 'bare' twisted nematic (TN) LCD has some limits to use as a display device, though its great strong points that low cost, high yield, simple design, high transmittance and normally white. The 'WideView(WV)' film which introduced by Fuji co., has been good solution to extend the viewing angles of TN mode, therefore that film have been used generally for TN panels needed wide viewing angle. This paper introduce the research to find the parameters of the Wide view film and a TN panel which affect viewing angle characteristics and how to adjust those parameters.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.250-253
• /
• 2009

Effective methods for monitoring the quality of polycrystalline silicon (poly-Si) films are discussed. Raman spectroscopy is typically used to determine crystallinity of poly-Si, but this method has limitations for data gathering on large substrates for mass production of poly-Si TFT backplanes. Spectroscopic ellipsometry is proposed as an alternative for fast and simple estimation of poly-Si quality on large substrates. By using both ellipsometry and Raman spectroscopy, it is possible to determine whether the quality and uniformity of the poly-Si films meet the criteria required for mass production of TFT backplanes for AMOLED panels.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.367-369
• /
• 2009

Optically anisotropic rotating balls were disposed in a monolayer, and controllably closely packed with respect to one another in the monolayer. The close packed monolayer configuration provided high brightness and improved contrast. The monolayer rotating ball display (MRB) electrically demonstrated a fast response time of approximately 40 msec at a voltage of 30 V. Measurements of the rotation as a function of voltage led to surface charge density for the balls in the range of 3-4 ${\mu}C/m^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1174-1177
• /
• 2006

A bottom contact organic thin film transistor (OTFT) is fabricated with an organic double-layered gate insulator (GI) and pentacene. The PMMA and MNB layers are treated on gate insulator and source/drain (S/D, Au) before depositing pentacene to investigate device properties and pentacene growth. The sequence of surface treatment affects a device performance seriously. The ultra-thin PMMA (below 50A) was deposited on organic gate insulator and S/D metal by spin coating method, which showed no deterioration of on-state current (Ion) although bottom contact structure was exploited. We proposed that the reason of no contact resistance (Rc) increase may be due to a wettability difference in between PMMA / Au and PMMA / organic GI. As a result, the device treated by $PMMA\;{\rightarrow}\;MNB$ showed much better Ion behavior than those fabricated by $MNB\;{\rightarrow}\;PMMA$. We will report the important physical and electrical performance difference associated with surface treatment sequence.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1499-1502
• /
• 2008

This paper proposes an efficient data compression for the conventional method of reducing EMI in a 10 bit LCD timing controller (TCON). In addition, we develop a new method to reduce EMI in a LCD TCON through repeated data on adjacent blocks. The novel technique reduced EMI by 10 dB for a 52" FHD 10it LCD TV.