• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.1
• /
• pp.99-108
• /
• 2001

The study was carried out to evaluate characteristics of inorganic phosphate fractions in cultivating soil with paper mill sludge comport(PMSC). The experiment were conducted in cultivating corn by a pot test. The place of the pot test was a plastic house. The pot size was 1/5000a and PMSC was added at rates of 0, 30, and 100 Mg/ha. The pot experiment was divided to two treatments, one in which corn was cultivated and the other which was not. The items of measurement was pH and inorganic phosphate fractions which were determined for the pot tests for 80 days. The results can be concluded as follows, pH increased depending on the higher rates of PMSC application to the soil during the Pot tests, because calcium content was high and contents of nutrient were high. When the application rates of PMSC were increased, Saloid-P and Fe-P decreased, while Al-P and Ca-P in soil increased during the pot tests. According to the increase of PMSC application rates, the growth and the yield of com significantly increased Such results seem to be associated with the higher nutrient level from PMSC application. Although uptake of phosphorus in corn decreased in the corn with increased application of the PMSC, phosphate deficiency didn't appear in the pot test.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.1
• /
• pp.27-32
• /
• 2004

Bone marrow transplantation(BMT) is widely used as curative means of various malignant and nonmalignant hematologic disorders, and early and accurate determination of engraftment is very important for critical management decisions. Reticulocyte counts performed by automated flow cytometric methods is a good indicator of erythropoietic activity and its evaluation has been proposed as an early predictor of bone marrow regeneration. Some reports highlighted the usefulness of the percentage of highly fluorescent reticulocytes and the sum of highly and medium fluorescent reticulocytes(immature reticulocyte fraction, IRF). In Asan Medical Center, the criteria for engraftment following BMT or PBSCT was defined as the first day of a 3-day trend of absolute neutrophil count(ANC)${\geq}500/uL$ and platelet count${\geq}30{\times}10^3/uL$. In 1999, Grotto et al proposed an indidator of bone marrow recovery as the first day on which the IRF was twice the minimum value after bone marrow transplantation. To compare the both criterias, we got consecutive datas of immature reticulocyte fraction, absolute neutrophil count(ANC), WBC count, platelet count and reticulocyte count by XE-2100 automated hematology analyzer(Sysmex Co. Japan) from 33 patients daily after BMT. When compared to standard neutrophil engraftment(10-30 days, $16.2{\pm}4.6days$), IRF engraftment (5-21 days, $11.0{\pm}3.9days$) occured significantly earlier in 87.9% of patients(P<0.05). The mean engraftment day for WBC count(11-29 days, $16.4{\pm}4.3days$) was similar to ANC, but platelet count and reticulocyte count revealed more delayed data (10-49 days, $19.1{\pm}7.4days$ vs 17-64 days, $31.4{\pm}14.1days$). In conclusion, our results confirm that an increase in the immature reticulocyte population is the earliest sign of the hematopoietic recovery after BMT and that automated reticulocyte quantification including immature fraction may be integrated into clinical protocols to evaluate bone marrow reconstitution.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.7
• /
• pp.1048-1054
• /
• 2014

The purpose of this study was carried out to investigate the cause of sulfur dioxide occurrence, general element composition, sulfur compounds, heavy metals, macro- & micro-minerals, and oxidation-reduction potential (ORP) following baking time course of RS (RS1, RS2, RS3, and RS4) and mudflat solar salts (MSS). Sulfur dioxide ($SO_2$) and sulfite ($SO{_3}^{2-}$) were not detected in MSS or RS. However, sulfate ($SO{_4}^{2-}$) content significantly decreased in RS (29,878.15~36,097.45 ppm) compared to that in MSS (35,601.65 ppm). ORP was 181.15 mV in MSS, and 58.55 mV in RS1. Moisture content was 9.34% in MSS and 0.00% in RS with increased NaCl (94.77~95.77%). Moisture and NaCl contents showed no significant difference in RS. Insoluble and sandy residues were higher in RS than in MSS, whereas Ca and K showed no significant difference. Mg and Cl contents were higher in RS than in MSS. Br level was higher in MSS (628.1 ppm) than in RS (512.72~586.62 ppm), but there was no significant difference in $NO_3$. Heavy metals (Pb, As, and Hg) were more abundant in RS than in MSS, but levels were still safe. These results suggest that MSS and RS may increase protection against from $SO_2$ and $SO{_3}^{2-}$.

• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.799-805
• /
• 2001

Two commercial alumina powders having different particle size of $0.5{\mu}m$ and 3${\mu}$m were presintered at 1120$^{\circ}$C for 2h and then lanthanum aluminosilicate glass was infiltrated at 1100$^{\circ}$C for up to 4h to obtain the densified glass-alumina composites. The effect of alumina particle size on packing factor, microstructure, wetting, porosity and pore size, and mechanical properties of the composite was investigated. The optimum mechanical properties and compaction behavior were observed for the 3${\mu}$m alumina particle dispersed composite. The 3${\mu}$m alumina particle size and distribution for he preform were within 0.1 to 48${\mu}$m and bimodal and random orientation. The strength and the fracture toughness of the composite having 3${\mu}$m alumina particles were 519MPa and $4.5MPa{\cdot}m^{1/2}$, respectively.

• The Korean Journal of Zoology
• /
• v.12 no.3
• /
• pp.94-102
• /
• 1969

The protective action of methylene blue against gamma-irradiation was studied with rats. Albino rats were given 360 rads of whole-body gamma-irradiation following an intraperitoneal injection of physiological saline or methylene blue. Male rats given methylene blue (38mg/kg) and the control rats given saline were alive following gamma-irradiation. Serum lactic dehydrogenase (LDH) activity, and LDH isoenzyme patterns in serum and various organs were determined at various time intervals after the exposure. 1) The serum LDH level in both the control and methylene blue-treated rats was increased during the initial phase, but returned to the initial level thereafter. 2) Methylene blue showed a marked delay in the rise of serum LDH at 15 and 64 hours after exposure. 3) The exposure in the control and methylene blue-treated rats resulted in an increase in the relative amount of the more electrophoretically mobile-anodal isoenzyme (band 1) and a decrease in the least mobile-cathodal isoenzyme (band 5) in serum, liver, heart and testis nearly at 40 and 116 hours, respectively. 4) Isoenzyme patterns in serum, liver and testis after exposure were not significantly different between the control and the methylene blue-treated rats. 5) Methylene blue showed a slight delay in alteration of heart tissue LDH isoenzyme patterns after exposure. 6) The increase of serum LDH level after exposure is a reflection of an immediate increase in the H type, band 1 of LDH isoenzymes. 7) It is concluded from this study that methylene blue has a remarkable radioprotective action in the serum LDH activity and in the heart tissue LDH isoenzyme patterns.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.1
• /
• pp.119-129
• /
• 2005

The ambient TSP data measured at Seoul, Incheon. Taean, Daegu, Busan in Korea were used to explain the chemical composition and general features of Asian Dust (AD) observed in Korea. 9 episodes out of 19 were sampled from 2000 through May 2002, and measurements were conducted covering ionic and metal components with mass concentration. The results showed that daily averaged mass concentration (TSP) during the AD episodes was 458 $\mu\textrm{g}$/㎥, and ionic and metal concentrations were 27.93 $\mu\textrm{g}$/㎥ and 71.7 $\mu\textrm{g}$/㎥, respectively, accounting for 6.1 % and 15.5% of the total aerosol mass. TSP concentrations during episodes were varied from 120 to 1742 $\mu\textrm{g}$/㎥ according to the impact of Asian Dusts and had a tendency of showing higher values at sites in the west side of Korea, which can be explained by the effect of diffusion and deposition. In this study, ionic components like Ca (NO$_3$)$_2$, CaSO$_4$, NaNO$_3$, Na$_2$SO$_4$ were prominent types in secondary aerosol during AD periods and also indicated that V, Co as well as soil elements such as Ca, Fe, Mg, Mn, K correlated well with Al, while Cu, Cd, Pb, Zn didn't agree well with it. In addition, enrichment factors (EFs) for each metal component were obtained to provide simple information about source contribution of Asian Dust, and the results were compared with those from other AD studies. In this study, the results showed that aerosol properties in Korea during the Asian Dust were considerably different from those of general atmospheric condition and specially varied from case to case rather than site to site, which implies that there are certain variations in the soil of source region, pathways of air mass, and meteorological condition. For the enhanced study, those factors should be combined with the features of Asian Dust resolved from this study.

• Journal of Environmental Science International
• /
• v.22 no.7
• /
• pp.787-799
• /
• 2013

The aim of this study was to investigate the accumulation of metallic elements and the control effect of marine pollution caused by ocean dumping in the sediments at a waste disposal area in the Yellow Sea. In July 2009, concentrations of organic matter and metallic elements (Al, Fe, As, Cd, Cr, Co, Hg, Ni, Mn, Pb, and Zn) were measured in surface sediments at the site. The ignition loss (IL) in the surface sediments showed a mean value of 15.4%, about 1.5 times higher than the mean value of the sediments in the coastal areas of Korea. The chemical oxygen demand (COD) at some disposal sites exceeded 20 mg $O_2/g{\cdot}dry$, which signifies the initial concentration of marine sediment pollutants in Japan. The disposal sites contain higher concentrations of Cr, Cu and Zn than the sediments of bays and estuaries that might be contaminated. The magnitude of both metal enrichment factors (EF) and adverse biological effects suggest that pollution with Cr and Ni occurred due to the dumping of waste in the study area. In addition, the geoaccumulation index (Igeo) showed that the surface sediments were moderately contaminated. By the mid-2000s, when the amount of waste dumped at this site was the highest, the concentration of metallic elements was higher than ever recorded. On the other hand, in 2008-09, the need for environmental management was relatively low compare with the peak. As a result, the quality of marine sediment has been enhanced, considering the effect of waste reduction and natural dilution in the disposal area.

• Korean Journal of Optics and Photonics
• /
• v.24 no.5
• /
• pp.224-230
• /
• 2013

Laser Lift-Off (LLO) is a process that removes a GaN or AIN thin layer from a sapphire wafer to manufacture vertical-type LEDs. It consists of a light source, an attenuator, a mask, a projection lens and a beam homogenizer. In this paper, we design an attenuator and a projection lens. We use the 'ZEMAX' optical design software for analysis of depth of focus and for a projection lens design which makes $7{\times}7mm^2$ beam size by projecting a beam on a wafer. Using the 'LightTools' lighting design software, we analyze the size and uniformity of the beam projected by the projection lens on the wafer. The performance analysis found that the size of the square-shaped beam is $6.97{\times}6.96mm^2$, with 91.8 % uniformity and ${\pm}30{\mu}m$ focus depth. In addition, this study performs dielectric coating using the 'Essential Macleod' to increase the transmittance of an attenuator. As a result, for 23 layers of thin films, the transmittance total has 10-96% at angle of incidence $45-60^{\circ}$ in S-polarization.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.5
• /
• pp.405-418
• /
• 2007

Mesenchymal stem cells(MSCs) have been though to be multipotent cells that can replicate that have the potential to differentiate into lineages of mesenchymal tissue including the bone, cartilage, fat, tendon, muscle, and marrow stroma. Especially, scaffolds to support cell-based tissue engineering are critical determinants of clinical efforts to regenerate and repair the body. Selection of a matrix carrier imvolves consideration of the matrix's role as a scaffold for physical support and host tissue integration as well as its ability to support of synergize the osteoinductive program of the implanted mesenchymal stem cell. The aim of this study is to evaluate the effect of autobone and Bio-$Oss^{(R)}$ to adherent mesenchymal stem cells as scaffolds on sinus augmentation with fibrin glue mixture in a rabbit model. 16 New Zealand White rabbits were divided randomly into 4 groups based on their time of sacrifice(1, 2, 4 and 8 weeks). First, mesenchymal stem cells were isolated from iliac crest marrow of rabbits and expanded in vitro. Cell culture was performed in accordance with the technique described by Tsutsumi et al. In the present study, the animals were sacrificed at 1, 2, 4 and 8 weeks after transplantation, and the bone formation ability of each sides was evaluated clinically, radiologically, histologically and histomorphologically. According to the histological observations, autobone scaffolds group showed integrated graft bone with host bone from sinus wall. At 2 and 4 weeks, it showed active newly formed bone and neovascularization. At 8 weeks, lamellae bone was observed in sinus graft material area. Radiologically, autobone with stem cell showed more radiopaque than Bio-$Oss^{(R)}$ scaffolds group. there were significant differences in bone volume between 4 and 8 weeks(p<0.05).

• Korean Journal of Materials Research
• /
• v.17 no.5
• /
• pp.256-262
• /
• 2007

Effects of interlayer and the combination of different coating methods on the mechanical and corrosion behaviors of TiN and CrN coated on 420 stainless steel have been studied. STS 420 specimen were tempered at $300^{\circ}C$ for 1 hr in vacuum furnace. The TiN and CrN thin film with 2 ${\mu}m$ thickness were coated by arc ion plating and DC magnetron sputtering following the formation of interlayer for pure titanium and chromium with 0.2 ${\mu}m$ thickness. The microstructure and surface analysis of the specimen were conducted by using SEM, XRD and roughness tester. Mechanical properties such as hardness and adhesion also were examined. XRD patterns of TiN thin films showed that preferred TiN (111) orientation was observed. The peaks of CrN (111) and $Cr_2N$ (300) were only observed in CrN thin films deposited by arc ion plating. Both TiN and CrN deposited by arc ion plating had the higher adhesion and hardness compared to those formed by magnetron sputtering. The specimen of TiN and CrN on which interlayer deposited by magnetron sputtering and thin film deposited by arc ion plating had the highest adhesion with 22.2 N and 19.2 N. respectively. TiN and CrN samples shown the most noble corrosion potentials when the interlayers were deposited by using magnetron sputtering and the metal nitrides were deposited by using arc ion plating. The most noble corrosion potentials of TiN and CrN were found to be approximately -170 and -70 mV， respectively.