• 한국전기전자재료학회논문지
• /
• 제13권5호
• /
• pp.444-450
• /
• 2000

We prepared Co-Cr thin film for perpendicular magnetic recording media with facing targets sputtering system(FTS system) which can deposit a high quality thin film in plasma-free state and wide range of working pressure. The effect of sputtering conditions(argon gas pressure and substrate temperature) on the magnetic and the crystallographic characteristic of Co-Cr thin film was investigated. And the variation of perpendicular coercivity with the variation of film thickness was studied. As a result we obtained the high perpendicular coercivity of 1900Oe and the good dispersion angle of c-axis($\Delta$$\theta$$_{50}$) of 5$^{\circ}$on the film thickness of 100nm for the promising recording layer of perpendicular magnetic recording media.c recording media.a.

• 한국안전학회지
• /
• 제11권3호
• /
• pp.112-118
• /
• 1996

When fossil fuels are burned they produce CO gas because of incomplete combustion. If the CO gas reacts with the hemoglobin in the red blood cells, it may result in death or sequelae. Generally, the CO gas is eliminated in the form of the $$$CO_2$ gas by the oxidation reaction over the platinum catalyst. In this study, the electrochemical CO removal was investgated by using the solid electrolyte cell reactor, the type of which was represented as reactants$/Pt/Y_2O_3-ZrO_2/Pt/Air$. If the overpotential was applied to the platinum working electrode, the conversion could be changed with the overpotential applied. It was found that the oxidation rate could be increased 2.8 times higher than that of the normal condition, i. e. under open circuit conditions when $P_{co}/P_{O_2}$ was 0.5 and overpotential was 0.9V. From these results, it is concluded that the reactor used in this study is more efficient than conventional catalytic reactors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.376-379
• /
• 1993

GoldStar Industrial Systems Co. R & D center successfully developed the inverter for welding under the support of GoldStar Electric Machinery Co. Now, we are currently working on the mechanical part of articulated robot and a high-performance general purpose motion controller. By combining the above three items, we will be able to constitute the complete welding robot system on our own. In this article. the welding robot system currently under developing is introduced. The main focus will be placed on the development of general purpose motion controller with welding control module. Therefore, the architecture of welding robot controller where the general purpose motion controller is combined with the welding controller module will be explained. Here, the software system will be explained with regard to the hardware system.

• 공업화학
• /
• 제33권5호
• /
• pp.523-531
• /
• 2022

A NiCo-metal organic framework (MOF) electrode, prepared using urea as a surfactant, was synthesized using a one-pot hydrothermal method. The addition of urea to the NiCo-MOF creates interstitial voids and an ultra-thin nanostructure in the NiCo-MOF, which improves its charge transfer performance. We obtained the optimal metal to surfactant ratio to achieve the best specific capacitance. The NiCo-MOF was employed as the working electrode material in a three-electrode system. Field emission scanning electron microscopy, X-ray diffraction, and Fourier-transform infrared spectroscopy were employed to characterize the microstructures and morphologies of the composites. Cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy curves were employed to quantify the electrochemical properties of the electrodes in a 6 M KOH electrolyte.

• 국제초고층학회논문집
• /
• 제11권2호
• /
• pp.137-144
• /
• 2022

As one of the most important vertical transportation equipment in super high-rise buildings, the construction elevator directly affects the project period, cost, and effectiveness. The paper proposes a new construction elevator with single-guide rail and multi-cages. It can solve the problems of single construction elevator capacity shortage and efficacy decrease with height reduction, the occupancy of plan and elevation position of multiple construction elevators, and extension of total construction period by cycling operation of multi-cages on a single-guide rail. The paper focuses on the design and research of the main components of the equipment, such as the rotating guide rail mechanism, vertical bearing mast tie system, segmented electrical power supply system, group control scheduling system, and safety anti-collision system.

• 한국안전학회지
• /
• 제29권5호
• /
• pp.29-34
• /
• 2014

The live line working is inherently dangerous as the workers have to work under the risk of electrical shock and most of works are carried out at height. The live line working need the some specific techniques and higher level safety measures such as a risk assessment to carry out works safely, but the electrical construction companies performed live-line working are usually small-sized companies. They have less capacity to have own safety management system. This study intended to conduct an in-depth analysis on the cause of electric shock accidents to provide basic data for policy proposing taking into considering the past eleven years for a long-term plan. And the aim of this study is to propose the policy about the equipment performance standards and/or worker's safety standards to revise the standards for preventing electric shock accidents, moreover, co-relation of the electrical work order form and on safety workings, especially electrical construction company/work.

• 설비공학논문집
• /
• 제13권11호
• /
• pp.1114-1124
• /
• 2001

The application of carbon dioxide as an attractive natural working fluid in air cooling and heating system is increasingly important in view of the CFC substitution problem. The thermal performance of compact evaporator was analyzed using section-by-section method. The effects of the two-dimensional nonuniformity of air flow through the evaporator is presented. The detrimental effect of the aid flaw nonuniformity on the thermal performance of the evaporator is found to be significant for many typical applications. It is shown that total heat transfer rate of evaporator using $CO_2$ is higher than that using R134a at the simulation conditions.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2009년도 특별논문집
• /
• pp.107-114
• /
• 2009

In the recent large block are used to build the ship to improve productivity. For this reason, two or more floating cranes that are connected in parallel is the trend. Typically, when working with floating crane load safety factor is considered. Even in the parallel operation, load safety factor is calculated similar to working alone. For this reason, operations do not guarantee the reliability or excessive safety factor applied. Therefore, the subdivided cases for calculating the safety factor are defined when parallel connected floating cranes are operated. Based on those cases, the operation standard is made about procedure using parallel connected floating cranes. And to verify this, dynamics simulation was performed for verification using the dynamics simulation program.

• 한국초등과학교육학회지:초등과학교육
• /
• 제27권2호
• /
• pp.170-178
• /
• 2008

In this research, we observed the co-works among novice and expert science teachers who were involved in a science teacher association and explored their interactions. The science teacher association is K-12 science teachers' gathering near Seoul. This study is a case study with the participant observation and the private interview of 8 novice teachers and 3 expert teachers. Based on the collected data, interaction between novice and expert teachers was categorized as seven types; question and answer, demonstration, presentation, co-working, providing materials, listening, and showing interest. Several factors supporting such an active interaction were derived from this study; 1) Teachers perceived well about the importance and the merits of co-working with other science teachers. 2) The open and cooperative environment of the science teacher association supported teachers' interaction. 3) There were tasks that teachers needed to co-work such as the science fair and the science camp. 4) There were opportunities of interactions for publishing books and developing modules. 5) Lots of expert teachers were willing to help and co-work with novice teachers. We found that novice teachers could continue to grow in terms of the professional development under interactive, continuing and cooperative environment with expert teachers.

• Asia pacific journal of information systems
• /
• 제16권2호
• /
• pp.183-203
• /
• 2006

Firms are increasingly adopting online communities-of-practice (CoPs) with strong managerial support in hopes of promoting knowledge sharing and creation within the organization. Excessive managerial concern and sponsoring, however, could harm the spontaneity of CoP participants, which is one of the pivotal characteristics of virtual communities, and in the end, have negative impact on their smooth operation. In this regard, this study examines the factors which affect the stimulation of CoPs and explores the difference in their operating mechanisms under two differing organizational structural settings by the existence of a sponsor. By analyzing 133 samples of CoPs in a globally leading company, this study found that the existence of a sponsor designated by the organization, has serious influence on the working of CoPs, That is, leaders' enthusiasm and the level of off-line activities are critical factors for the stimulation of CoPs which have no sponsor, while in case of CoPs that have their sponsors, neither leaders' enthusiasm nor the level of off-line activities are significantly related to the stimulation of CoPs. At the same time, the performance of CoPs which have their sponsors was found significantly higher than that of CoPs which have no sponsor. These results indicate that firms need to pay special attention to organizational sponsorship when introducing CoPs within their organizations.