• 제목/요약/키워드: Co-view

검색결과 889건 처리시간 0.033초

Lowest-Cost Highest-Yield Superior Performance MVA LCDs by Amplified Intrinsic Fringe Field

  • Ong, Hiap L.;Liang, Justin;Guo, Jia Haw;Chen, I Hao;Wu, Chang Lin;Lan, Wei-Chou;Lin, Tung-Liang
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.1645-1648
    • /
    • 2008
  • We successfully fabricated lowest-cost superior perform ance MVA LCDs with highest-yield, high transmission, high contrast-ratio, and wide viewing angle. Using the amplified intrinsic fringe field (AIFF) controlled MVA invented by Ong, we eliminated all protrusions and ITO slit geometries. We further achieved: (1) faster gray-gray response times without the over-drive technology, (2) faster tough mura, and (3) lower flicker and cross-talk in the row inversion driving schemes.

  • PDF

안면 비대칭 환자 진단에 있어서 후전방두부 방사선사진과 이하두정 방사선사진 및 파노라마 방사선사진의 임상적 효용성 (THE CLINICAL RELIABILITY AND EFFECTIVENESS OF THE POSTERO-ANTERIOR CEPHALOMETRIC VIEW, SUBMENTOVERTEX VIEW & PANORAMIC VIEW IN THE DIAGNOSIS OF THE FACIAL ASYMMETRY)

  • 최은영;박태원
    • 치과방사선
    • /
    • 제24권2호
    • /
    • pp.427-437
    • /
    • 1994
  • Clinical examination, photometric evaluation, & radiographic analysis have been used to evaluate the asymmetry of the face. Commonly used skull radiographs to assess skeletal asymmetry include poatero-anterior cephalometries, submentovertex view, & panoramic view. The purpose of this study is the comparison of the reliance of the postero-anterior cephalometric view, submentovertex view, & panoramic view in the asymmetry evaluation. All measurements were performed on the each radiographs of 31 control group & 30 asymmetric group. The measurements are MSL(midsagittal plane)-Co, MSL-Go, MSL-Me, MSL-Al, MSL-Bl, Mn. Ramus Height(Co-Go), Mn. Body Length(Go-Me), and Total Mn. Length(Co-Me). The results were as follows: 1. The lack of either a right-sided or left-sided asymmetric dominant was found. 2. The postero-anterior cephalometric view & submentovertex view relatively agreed with each other in the result. The postero-anterior cephalometric view & submentovertex view had the clinical reliability & effectiveness in the diagnosis of the skeletal asymmetry(p<0.05). 3. The panoramic view showed more magnification compared to the other radiographs. In the vertical measurements the panoramic view had clinical reliability relatively(p<0.05). But we cannot rely on the horizontal measurements in the panoramic view(p>0.05).

  • PDF

LabVIEW와 Multisim의 Co-simulation을 이용한 3-Level NPC Inverter의 시뮬레이션 (Simulation of 3-Level NPC Inverter using Co-simulation of LabVIEW and Multisim)

  • 김선태;지준근
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2014년도 전력전자학술대회 논문집
    • /
    • pp.546-547
    • /
    • 2014
  • 본 논문에서는 LabVIEW와 Multisim을 이용한 Co-simultion 기능으로 얻은 시뮬레이션 결과와 그 과정을 기술한다. 3-Level NPC Inverter를 제어하였으며 동일한 조건에서 PSIM으로 시뮬레이션한 결과와 비교하여 보았다.

  • PDF

다시점 객체 공분할을 이용한 2D-3D 물체 자세 추정 (2D-3D Pose Estimation using Multi-view Object Co-segmentation)

  • 김성흠;복윤수;권인소
    • 로봇학회논문지
    • /
    • 제12권1호
    • /
    • pp.33-41
    • /
    • 2017
  • We present a region-based approach for accurate pose estimation of small mechanical components. Our algorithm consists of two key phases: Multi-view object co-segmentation and pose estimation. In the first phase, we explain an automatic method to extract binary masks of a target object captured from multiple viewpoints. For initialization, we assume the target object is bounded by the convex volume of interest defined by a few user inputs. The co-segmented target object shares the same geometric representation in space, and has distinctive color models from those of the backgrounds. In the second phase, we retrieve a 3D model instance with correct upright orientation, and estimate a relative pose of the object observed from images. Our energy function, combining region and boundary terms for the proposed measures, maximizes the overlapping regions and boundaries between the multi-view co-segmentations and projected masks of the reference model. Based on high-quality co-segmentations consistent across all different viewpoints, our final results are accurate model indices and pose parameters of the extracted object. We demonstrate the effectiveness of the proposed method using various examples.

MFW 치료 시 ViewRay의 표면선량 측정에 따른 임상 적용 가능성 평가 (Evaluation of the possibility of clinical application by surface dose measurement of ViewRay in MFW treatment)

  • 선거준;손상준;이양훈;이제희
    • 대한방사선치료학회지
    • /
    • 제30권1_2호
    • /
    • pp.169-176
    • /
    • 2018
  • 목 적 : Bolus 적용 유, 무와 치료기에 따른 피부 선량을 측정, 비교하여 Malignant Fungating Wound와 같이 높은 피부 선량을 요구하는 경우 피부 선량 증가 목적으로 Co-60 ViewRay 치료계획의 임상 적용 가능성을 검토하였다. 대상 및 방법 : 표면선량을 측정하기 위해 Rando phantom을 이용하여 좌측유방 중심부를 기준으로 2.5 cm 격자 배열의 9개의 내측 측정지점과, 유방과 피부와 접하는 상하, 좌우 4개의 외측 측정지점을 포함한 총 13개 측정지점을 표시하였다. CT를 촬영을 하여 Eclipse와 ViewRay-TPS를 통해 각각의 치료계획을 수립하였으며, 좌측유방 V2Gy = 95 %가 전달되도록 Fixed beam-IMRT 치료계획을 수립하였다. 측정 전 QED 검출기를 교정하였으며 Phantom에 표시된 13개의 측정지점에 QED 검출기를 위치시켜 각 치료계획 별 표면선량을 True-beam과 View-ray를 이용하여 5 mm Bolus 적용 전과 후, 각각 3회 측정하여 비교하였다. 결 과 : 5 mm Bolus를 적용 전 Co-60 Viewray와 선형가속기의 표면선량은 $76.8%{\pm}5.2%$ vs. $67.3%{\pm}7.5%$로 나타났으며, 5 mm Bolus 적용 후 표면선량은 각각 $87.6%{\pm}8.9%$ vs. $80.3%{\pm}10.2%$로 측정되었다(p<0.001). 결 론 : 각 치료기의 표면선량 측정결과, Co-60 ViewRay는 Bolus를 사용하지 않았음에도 불구하고 표면 선량이 일반 5 mm Bolus를 사용한 6 MV 선형가속기의 95.6 % 수준 달하는 것을 확인하였다(p<0.001). 또한 매 회 치료마다 자기공명영상을 이용하여 피폭 문제없이 치료 부위 변화를 관찰할 수 있어 적응형 치료계획을 수립하기 쉽고 피부 선량 확보가 수월하므로, 크기 변화가 빠르고 높은 피부선량을 요구하는 Malignant Fungating Wound 환자의 경우 Co-60 ViewRay가 선형가속기에 비해 유용할 것으로 사료된다.

  • PDF

파노라마 및 정모방사선사진을 이용한 저작형태에 따른 안면비대칭에 관한 연구 (A Study of Facial Asymmetry and Masticatory Pattern Using Panorama and PA Cephalograph.)

  • 이유미;김재창
    • Journal of Oral Medicine and Pain
    • /
    • 제31권2호
    • /
    • pp.167-176
    • /
    • 2006
  • 최근에 안모에 관심이 증가하면서 안모비대칭에의 불편을 호소하는 환자가 증가하고 있으며 안모 비대칭 평가에는 고가의 3차원적인 영상이 많이 이용되었다. 본 연구에서는 치과영역에서 쉽게 접할 수 있으며 비교적 저렴한 파노라마방사선 사진과 정모방사선 사진을 이용하였다. 안모 비대칭에 대한 골격적인 평가를 하고자 본 연구에 지원한 대상자 중에 특이할만한 전신 질환자나 특이한 교합을 지닌 대상을 제외한 35명을 택하여 파노라마 방사선 사진과 정모 방사선 사진을 촬영하였으며, 저작 형태와 안모 비대칭을 인지하는 정도를 설문지 형식으로 조사하여 다음과 같은 결과를 얻었다. 1. 파노라마 방사선 사진상의 좌우측 비교에서 하악의 수직적 측정 항목인 Co-Go(p<0.05), Co-Ag(p<0.05)에서 하악각 측정 항목에서는 Co-Go-Ag(p<0.05), Go-Me-Ag(p<0.01) 유의한 차이를 보였다. 2. 파노라마방사선 사진에서 저작측에 따른 평가에서는 하악의 수직적 길이측정치에서 우측 저작자는 Co-Ag(p<0.01) 좌측 저작측에서는 Co-Go(p<0.05)에서 유의성을 보였다. 3. 정모 방사선사진 상의 좌우측 안모비대칭 비교에서는 Cg-Go(p<0.01), 우측 저작자에서는 Co-Ag(p<0.01) 좌측 저작자에서는 Cg-Go(p<0.05)에서 유의한 차이를 보였다. 4. 안모비대칭이 있다고 인지하는 군에서 하악의 수직적 측정 항목인 Co-Go(p<0.05)에서 유의성을, 하악각의 측정항목인 Co-Si-Cr(p<0.05), Go-Me-Ag(p<0.05)에서 유의성을 보였다. 안모가 좌측이 더 길다고 인지하는 군에서는 Go-Ag(p<0.05)의 수평적 계측 항목이 우측이 더 길었으며, 우측안모가 길다고 인지하는 군에서는 Co-Go(p<0.05)와 Co-Ag(p<0.01)의 하악의 수직적 측정치에서 유의성을 보였다.

A Study of viewing angle characteristics of the film compensated TN mode

  • Park, Chi-Hyuck;Kim, Eui-Man;Lee, Jang-Ho;Park, Cheol-Woo;Lee, Kyung-Ho
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.1462-1465
    • /
    • 2009
  • Because of its weak points that narrow viewing angle and grayscale inversion, 'bare' twisted nematic (TN) LCD has some limits to use as a display device, though its great strong points that low cost, high yield, simple design, high transmittance and normally white. The 'WideView(WV)' film which introduced by Fuji co., has been good solution to extend the viewing angles of TN mode, therefore that film have been used generally for TN panels needed wide viewing angle. This paper introduce the research to find the parameters of the Wide view film and a TN panel which affect viewing angle characteristics and how to adjust those parameters.

  • PDF

ChroView: A Trace Viewer for Browsing and Editing Chromatogram files

  • Tae, Hong-Seok;Kong, Eun-Bae;Park, Kie-Jung
    • Genomics & Informatics
    • /
    • 제5권1호
    • /
    • pp.30-31
    • /
    • 2007
  • Many visualization tools have been designed to aid information processing during whole genome projects. We have developed a trace viewer program, ChroView, which can read a chromatogram file and display the chromatogram traces of the four bases. The program can be used to examine sequencing quality and base-calling errors. It can also help researchers to edit and save base-calling results while browsing the traces. Additionally, this program has a basecalling feature which can produce supplementary data for validation of the results from other base-calling programs.

$LabVIEW^{TM}$를 이용한 고출력 가간섭광 계측 (A measurement of the high power coherent light using LabVIEWTM)

  • 황대석;최종운;이영우
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2003년도 춘계종합학술대회
    • /
    • pp.821-823
    • /
    • 2003
  • 산업 전반에 사용되는 수백W-수kW의 $CO_2$ 및 Nd:YAG 레이저광 출력측정 및 교정을 위해 정밀한 레이저 계측 장치를 제작하고 성능 평가 및 출력 측정을 위해 National Instrument사의 LabVIEW를 이용한 프로그램을 작성하였다. 레이저광의 출력측정을 위해 전원 공급기와 두 대의 DVM, 디지털 카운터를 GPIB를 통해 PC에 연결하였고 이를 이용해 데이터를 수집하여 그 결과를 분석하였다.

  • PDF

커뮤니케이션 관점에서 살펴본 '데이터 건축'의 특성 연구 - MVRDV WoZoCo를 중심으로 - (A study on the Characteristics of 'Data Architecture' from the communicational point of view - Focused on WoZoCo by MVRDV -)

  • 김은용;임경란
    • 한국실내디자인학회:학술대회논문집
    • /
    • 한국실내디자인학회 2005년도 춘계학술발표대회 논문집
    • /
    • pp.60-63
    • /
    • 2005
  • After 20th century, Data tend to important in a sphere of architecture. In this study such tendency was christened a Data architecture. And The purpose of the study is to define data architecture and to find out of data architecture's merits from a communicational point of view. Above-mentioned Communication means that exchange all kinds of something between each other.

  • PDF