• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1645-1648
• /
• 2008

We successfully fabricated lowest-cost superior perform ance MVA LCDs with highest-yield, high transmission, high contrast-ratio, and wide viewing angle. Using the amplified intrinsic fringe field (AIFF) controlled MVA invented by Ong, we eliminated all protrusions and ITO slit geometries. We further achieved: (1) faster gray-gray response times without the over-drive technology, (2) faster tough mura, and (3) lower flicker and cross-talk in the row inversion driving schemes.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.24 no.2
• /
• pp.427-437
• /
• 1994

Clinical examination, photometric evaluation, & radiographic analysis have been used to evaluate the asymmetry of the face. Commonly used skull radiographs to assess skeletal asymmetry include poatero-anterior cephalometries, submentovertex view, & panoramic view. The purpose of this study is the comparison of the reliance of the postero-anterior cephalometric view, submentovertex view, & panoramic view in the asymmetry evaluation. All measurements were performed on the each radiographs of 31 control group & 30 asymmetric group. The measurements are MSL(midsagittal plane)-Co, MSL-Go, MSL-Me, MSL-Al, MSL-Bl, Mn. Ramus Height(Co-Go), Mn. Body Length(Go-Me), and Total Mn. Length(Co-Me). The results were as follows: 1. The lack of either a right-sided or left-sided asymmetric dominant was found. 2. The postero-anterior cephalometric view & submentovertex view relatively agreed with each other in the result. The postero-anterior cephalometric view & submentovertex view had the clinical reliability & effectiveness in the diagnosis of the skeletal asymmetry(p<0.05). 3. The panoramic view showed more magnification compared to the other radiographs. In the vertical measurements the panoramic view had clinical reliability relatively(p<0.05). But we cannot rely on the horizontal measurements in the panoramic view(p>0.05).

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.546-547
• /
• 2014

본 논문에서는 LabVIEW와 Multisim을 이용한 Co-simultion 기능으로 얻은 시뮬레이션 결과와 그 과정을 기술한다. 3-Level NPC Inverter를 제어하였으며 동일한 조건에서 PSIM으로 시뮬레이션한 결과와 비교하여 보았다.

• The Journal of Korea Robotics Society
• /
• v.12 no.1
• /
• pp.33-41
• /
• 2017

We present a region-based approach for accurate pose estimation of small mechanical components. Our algorithm consists of two key phases: Multi-view object co-segmentation and pose estimation. In the first phase, we explain an automatic method to extract binary masks of a target object captured from multiple viewpoints. For initialization, we assume the target object is bounded by the convex volume of interest defined by a few user inputs. The co-segmented target object shares the same geometric representation in space, and has distinctive color models from those of the backgrounds. In the second phase, we retrieve a 3D model instance with correct upright orientation, and estimate a relative pose of the object observed from images. Our energy function, combining region and boundary terms for the proposed measures, maximizes the overlapping regions and boundaries between the multi-view co-segmentations and projected masks of the reference model. Based on high-quality co-segmentations consistent across all different viewpoints, our final results are accurate model indices and pose parameters of the extracted object. We demonstrate the effectiveness of the proposed method using various examples.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.169-176
• /
• 2018

Purpose : The purpose of this study is to evaluate clinical applicability of Co-60 ViewRay treatment plan to increase the skin dose in case of high skin dose is required such as Malignant Fungating Wound By measuring the presence / absence of Bolus application and skin dose by the treatment device and comparing it Materials and Methods : Nine inner measuring points of 2.5 cm lattice arrangement and all 13 measuring points including upper and lower left and right measuring points touching the chest and skin were marked. After CT was taken, each treatment plan was formulated through Eclipse and ViewRay-TPS, and a Fixed beam-IMRT treatment plan was formulated so that the left chest V2Gy=95 % is delivered. Before measurement QED detector was calibrated and the QED detector was positioned at the 13 measurement points displayed on Phantom and surface dose of each treatment planner was measured using 5 mm Bolus application using True-beam and View-ray before and after, measure three times and compare each before applying 5 mm Bolus. Results : The surface dose of the Co-60 ViewRay and the linear accelerator appeared at $76.8%{\pm}5.2%$ vs. $67.3{\pm}%7.5%$ and the surface dose after application of 5 mm Bolus was $87.6%{\pm}8.9%$ vs. $80.3%{\pm}10.2%$ It was measured at 10.2 % (p<0.001). Conclusion : As a result of the surface dose measurement of each treatment instrument, Co-60 ViewRay confirmed that the surface dose reached 95.6 % of 6 MV Linac with conventional 5 mm bolus, despite not using Bolus (p<0.001). Also, by utilizing magnetic resonance images for each treatment, it is possible to observe the change in the treatment site without the problem of exposure, it is easy to formulate an adaptive treatment plan and it is easy to secure the skin dose, so the size In the case of Malignant Fungating Wound patients who need fast skin changes and need high skin doses, Co-60 ViewRay is considered to be more useful than linear accelerators.

• Journal of Oral Medicine and Pain
• /
• v.31 no.2
• /
• pp.167-176
• /
• 2006

Recent studies have shown that there are significant increasing facial asymmetry using 3-dimensional imaging. This study use panorama view and PA cephalograph that were low in price and make good use in dentistry. For this study, 35 persons without remarkable malocclusion were selected, they had panorama view and PA cephalograph, make written questionnaire about facial asymmetry cognition and masticatory pattern. Data obtained were statistically processed by the SPSS Windows program and the results of this study were as follows: 1. There were significant difference between Rt and Lt. on Co-Go, Co-Ag, Co-Go-Ag, Go-Me- Ag. 2. In panorama view, There were significant difference between Rt. and Lt Co-Ag that chewing right side, Rt. and Lt. Co-Go that chewing left side, 3. In PA cephalograph view, There were significant difference in Rt. and Lt. Cg-Go, Rt. and Lt. Co-Ag that chewing right side, Rt. and Lt. Cg-Go that chewing left side 4. There were significant difference in Rt. and Lt. Co-Go, CO-si-CR, go-ME-Ag that cogniting facial asymmetry.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1462-1465
• /
• 2009

Because of its weak points that narrow viewing angle and grayscale inversion, 'bare' twisted nematic (TN) LCD has some limits to use as a display device, though its great strong points that low cost, high yield, simple design, high transmittance and normally white. The 'WideView(WV)' film which introduced by Fuji co., has been good solution to extend the viewing angles of TN mode, therefore that film have been used generally for TN panels needed wide viewing angle. This paper introduce the research to find the parameters of the Wide view film and a TN panel which affect viewing angle characteristics and how to adjust those parameters.

• Genomics & Informatics
• /
• v.5 no.1
• /
• pp.30-31
• /
• 2007

Many visualization tools have been designed to aid information processing during whole genome projects. We have developed a trace viewer program, ChroView, which can read a chromatogram file and display the chromatogram traces of the four bases. The program can be used to examine sequencing quality and base-calling errors. It can also help researchers to edit and save base-calling results while browsing the traces. Additionally, this program has a basecalling feature which can produce supplementary data for validation of the results from other base-calling programs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.821-823
• /
• 2003

We have developed the evaluation program using LabVIEW for the high power laser measurement system.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.05a
• /
• pp.60-63
• /
• 2005

After 20th century, Data tend to important in a sphere of architecture. In this study such tendency was christened a Data architecture. And The purpose of the study is to define data architecture and to find out of data architecture's merits from a communicational point of view. Above-mentioned Communication means that exchange all kinds of something between each other.