• 대한전자공학회논문지SD
• /
• 제39권11호
• /
• pp.33-43
• /
• 2002

차세대 블록 암호 표준인 AES (Advanced Encryption Standard Rijndael(라인달) 암호 프로세서를 설계하였다. 라운드 변환블록 내부에 서브 파이프라인 단계를 삽입하여 현재 라운드의 후반부 연산과 다음 라운드의 전반부 연산이 동시에 처리되도록 하였으며, 이를 통하여 ${\cdot}$ 복호 처리율이 향상되도록 하였다. 라운드 처리부의 주요 블록들이 암호화와 복호화 과정에서 하드웨어 자원을 공유할 수 있도록 설계함으로써, 면적과 전력소모가 최소화되도록 하였다. 128-b/192-b/256-b의 마스터 키 길이에 대해 라운드 변환의 전반부 4 클록 주기에 on-the-fly 방식으로 라운드 키를 생성할 수 있는 효율적인 키 스케줄링 회로를 고안하였다. Verilog HDL로 모델링된 암호 프로세서는 Xilinx FPGA로 구현하여 정상 동작함을 확인하였다. 0.35-${\mu}m$ CMOS 셀 라이브러리로 합성한 결과, 약 25,000 개의 게이트로 구현되었으며, 2.5-V 전원전압에서 220-MHz 클록으로 동작하여 약 520-Mbits/sec의 성능을 갖는 것으로 예측되었다.

• Journal of Korean Dental Science
• /
• 제4권2호
• /
• pp.52-58
• /
• 2011

Purpose: Modifications of implant design have been related to improving initial stability. The purpose of this study was to investigate their respective effect on initial stability between two tapered implant systems (self-tapping vs. non-self-tapping) in medium density bone using three different analytic methods. Materials and Methods: Self-tapping implant (GS III$^{(R)}$; Osstem Implant Co., Busan, Korea) and non-self-tapping implant (Replace Select$^{(R)}$; Nobel Biocare, G$\H{o}$teborg, Sweden) were investigated. In Solid rigid polyurethane blocks of artificially simulated Quality 2 bone, each of the 5 implants was inserted according to the manufacturer's instructions for medium-bone drilling protocol. Evaluation of initial stability was carried out by recording the maximum insertion torque (IT) and performing the resonance frequency analysis (RFA), and the pull-out test. Results: The IT and RFA values of self-tapping implant were significantly higher than those of non self-tapping implant (P=.009 and P=.047, respectively). In the pull-out values, no significant differences were found in implants between two groups (P=.117). Within each implant system, no statistically significant correlation was found among three different outcome variables. Conclusions: These findings suggest that design characteristics of implant geometry significantly influence the initial stability in medium bone density.

• 한국태양에너지학회 논문집
• /
• 제29권1호
• /
• pp.44-49
• /
• 2009

Steam reforming of methane in the high temperature solar chemical reactor bas advantage in its heating method. Using concentrated solar energy as a heating source of the reforming reaction can reduce the $CO_2$ emission by 20% compared to hydrocarbon fuel. In this paper, the simulation result of methane-steam reforming on a high temperature solar chemical reactor(SCR) using Fluent 6.3.26 is presented. The high temperature SCR is designed for the Inha Dish-1, a Dish type solar concentrator installed in Songdo city. Basic SCR performance factors are referred to the former researches of the same laboratory. Inside the SCR porous metal is used for a receiver/reactor. The porous metal is carved like a dome shape on the incident side to increase the heat transfer. Also, ring-disc set of baffle is inserted in the porous metal region to increase the path length. Numerical and physical models are also used from the former researches. Methane and steam is mixed with the same mole fraction and injected into the SCR. The simulation is performed for a various inlet mass flow rate of the methane-steam mixture gas. The result shows that the average reactor temperature and the conversion rate change appreciably by the inlet mass flow rate of 0.0005 kg/s.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.479-484
• /
• 2011

In this paper, investigations of thick film $La_{0.75}Sr_{0.25}Ga_{0.8}Mg_{0.16}Fe_{0.04}O_{3-{\delta}}$ (LSGMF) cells fabricated via spin coating on either NiO-YSZ anode or $La_{0.7}Sr_{0.3}Ga_{0.6}Fe_{0.4}O_3$ (LSGF) cathode substrates are presented. A La-doped $CeO_2$ (LDC) layer is inserted between NiO-YSZ and LSGMF in order to prevent reactions from occurring during co-firing. For the LSGF cathode-supported cell, no interlayer was required because the components of the cathode are the same as those of LSGMF with the exception of Mg. An LSGMF electrolyte slurry was deposited homogeneously on the porous supports via spin coating. The current-voltage characteristics of the anode and cathode supported LSGMF cells at temperatures between $700^{\circ}C$ and $850^{\circ}C$ are described. The LSGF cathode supported cell demonstrates a theoretical OCV and a power density of ~420 mW $cm^2$ at $800^{\circ}C$, whereas the NiO-YSZ anode supported cell with the LDC interlayer demonstrates a maximum power density of ~350 mW $cm^2$ at $800^{\circ}C$, which decreased more rapidly than the cathode supported cell despite the presence of the LDC interlayer. Potential causes of the degradation at temperatures over $700^{\circ}C$ are also discussed.

• Annals of Clinical Neurophysiology
• /
• 제2권1호
• /
• pp.8-12
• /
• 2000

Purpose : The rapid development and wide popularity of Digital EEG(DEEG) is due to its convenience, accuracy and applicability for quantitative analysis. These advantages of DEEG make one hesitate to use analog EEG(AEEG). To assess the advantage of DEEG system utilizing AEEG(DAEEG) over conventional AEEG and the clinical applicability, a DAEEG system was developed and applied to animal model Methods : Sprague-Dawley rat as status epilepticus model were used for collecting the EEG data. After four epidural electrodes were inserted and connected to 8-channel analog EEG(Nihon-Kohden, Japan), continous. EEG monitoring via computer screen was done from two rats simultaneously. EEG signals through analog amplifier and filters were digitized at digital signal processor and stored in Windows-based pentium personal computer. Digital data were sampled at a rate of 200 Hz and 12 bit of resolution. Acquisition software was able to carry out 'real-time view, sensitivity control and event marking' during continuous EEG monitoring. Digital data were stored on hard disk and hacked-up on CD-ROM for off-line review. Review system consisted of off-line review, saving and printing out interesting segment and annotation function. Results: This DAEEG system could utilize most major functions of DEEG sufficiently while making a use of an AEEG. It was easy to monitor continuously compared to Conventional AEEG and to control sensitivity during ictal period. Marking the event such as a clinical seizure or drug injection was less favorable than AEEG due to slowed processing speed of digital processor and central processing unit. Reviewing EEG data was convenient, but paging speed was slow. Storage and management of data was handy and economical. Conclusion : Relatively simple digital EEG system utilizing AEEG can be set-up at n laboratory level. It may be possible to make an application for clinical purposes.

• Restorative Dentistry and Endodontics
• /
• 제29권6호
• /
• pp.498-503
• /
• 2004

The properties of ideal root canal sealers include the ability of sealing the total root canal system and no toxic effects to periradicular tissues. Cytotoxicity test using cell culture is a common screening method for evaluation of the biocompatibility of root canal sealers. The purpose of this study was to investigate the cytotoxic effect of newly developed resin-based sealer (Adseal 1, 2, and 3) comparing with those commercial resin-based sealers (AH26 and AH Plus), ZOE-based sealers (Tubliseal EWT, Pulp Canal Sealer EWT) and calcium hydroxide based sealer (Sealapex), An indirect contact test of cytotoxicity by agar diffusion was performed according to the international standard ISO 10993-5. L929 fibroblast cells were incubated at $37^{\circ}C$ in humidified 5% $CO_2-containing$ air atmosphere. The freshly mixed test materials were inserted into glass rings of internal diameter 5 mm and height 5 mm placed on the agar. After the 24 hrs incubation period, the decolorization zones around the test materials were assessed using an inverted microscope with a calibrated screen. A Decolorization Index was determined for each specimen. Adseal 1. 2, and 3 did not exert any cytotoxic effects, whereas AH26, AH Plus, Tubliseal EWT, Pulp Canal Sealer EWT, and Sealapex produced mild cytotoxicity.

• Journal of Korean Neurosurgical Society
• /
• 제65권2호
• /
• pp.307-314
• /
• 2022

Objective : The percutaneous thread transection technique is a surgical dissecting method using a dissecting thread inserted through a needle under ultrasound guidance without skin incision. As the new dissecting threads were developed domestically, this cadaver study was conducted to compare the effectiveness and safety between the new threads (ultra V sswire and smartwire-01) and a pre-existing commercial dissecting thread (loop & shear) by demonstrating a modified looped thread cubital tunnel release. Methods : The percutaneous cubital tunnel release procedure was performed on 29 fresh cadaveric upper extremities. The pre-existing commercial thread was used in 5 upper extremities. The two newly developed threads were used in 24 upper extremities. Two practitioners performed the procedures separately. After the modified looped thread cubital release, anatomical and histological analyses were performed by a blinded anatomist. The presence of the dissected cubital tunnel and damaged adjacent soft tissue was assessed. Results : Out of the 29 cadaveric upper extremities, 27 specimens showed complete dissection of the Osborne ligament and the proximal fascia of the flexor carpi ulnaris muscle. One specimen was incompletely dissected in each of the ultra V sswire and smartwire-01 groups. There were no injuries of adjacent structures including the ulnar nerve, ulnar artery, medial antebrachial cutaneous nerve, or flexor tendon with either the commercial thread or the newly developed threads. The anatomical analysis revealed clear and sharp incisional margins of the cubital tunnel in the Smartwire-01 and loop & shear groups. All three kinds of threads maintained proper linear elasticity for easy handling during the procedure. The smartwire-01 provided higher visibility in ultrasound than the other threads. Conclusion : The newly developed threads were effective and safe for use in the thread cubital tunnel release procedure.

• 지구물리와물리탐사
• /
• 제11권1호
• /
• pp.1-14
• /
• 2008

본 연구에서는 비정상적인 해양지각이나 섭입대의 데꼴망(decollement), 해저산 등과 같이 매우 불균질한 속도구조에서 발생할 수 있는 특성들을 가진 신호와 파형들이 포함된 탄성파 자료를 합성 탄성파 파형과의 비교를 통해 해석하는 방법을 제시하였다. 최근 대양지역에서의 광역 굴절법 탐사나 광각(wide-angle) 반사법 탐사를 통해 우리는 특징적인 신호와 파형뿐만 아니라 초동과 PmP와 같은 주요 반사파 위상들을 포함하고 있는 많은 양의 고해상, 고품질 탄성파 자료를 얻을 수 있다. 주요 후기 반사파 위상이나 거리에 따른 이상 진폭 감쇠를 포함한 몇몇 특징적인 파형들은 주시토모그래피 역산과 같은 기존의 해석법만 사용하기에는 해석에 어려움이 많다. 그러한 특징적인 위상들을 위한 최선의 해석 방법은 관측자료를 합성 탄성파 파형과 비교하면서 파선의 경로와 주시를 계산하는 것이다. 이 방법을 통해 우리는 관측된 파형들의 주된 특징들을 모두 포함한 적절한 구조 모델을 만들 수 있다. 앞서 말한 문제의 위상들을 해석하는데 있어서 많은 도움이 될 몇몇 실제 관측한 실례들을 포함한 결과들이 제시되었다. 파형 특성 분석에 있어서 우리가 접근한 방법은 대양지역뿐만 아니라 대륙지역에서도 고해상 및 고품질의 지각 구조 모델을 만드는데 있어서 혁신적인 방법임을 확신한다.

• 한국전자파학회논문지
• /
• 제20권4호
• /
• pp.323-332
• /
• 2009

본 논문에서는 기존의 $\lambda_0$/4 단락 스터브 대역 통과 필터의 특성을 개선하여 LTCC(Low Temperature Co-fired Ceramic)을 이용하여 UWB(Ultra Wideband) 응용에 적합한 필터 기술을 소개한다. 높은 유전 상수의 기판($\varepsilon_r$ = 40)상에 기존의$\lambda_0$/4의 단락 스터브 대역 통과 필터 기술을 적용하기 위하여 기존의 필터와는 다르게 낮은 특성 임피던스 선로를 이용하여 결과적으로 스터브의 수를 다섯 개에서 두 개로 감소시켰다. 또한, 3개의 단락 결합 선로를 이용해서 5.15 GHz에서 5.825 GHz의 주파수 범위에서 WLAN(Wireless Local Area Network) 저지 대역을 특성 내에 삽입하였다. 본 필터는 통과 대역에서 1 dB 미만의 삽입 손실과 10 dB 이상의 반사 손실을 갖는 것으로 측정되었고, 109.49 %의 대역폭 율이 달성되었다. 측정 결과는 시뮬레이션 결과와 잘 일치한다. 필터의 크기는 $4{\times}8{\times}0.57\;mm^3$이다.

• 한국의학물리학회지:의학물리
• /
• 제28권4호
• /
• pp.190-196
• /
• 2017

For the $ViewRay^{(R)}$ system (ViewRay Inc., Cleveland, OH, USA) which is representative of magnetic resonance (MR) guided radiotherapy machine, it is important to evaluate effectiveness of AAPM's TG-51 protocol and the effect of the magnetic field on absolute dosimetry. In order to measure the absolute dose, MR-compatible chamber and water phantom system manufactured in this study were used. The materials of the water phantom system were plastic of polymethyl methacrylate (PMMA) and non-ferrous materials. Due to the inherent feature of the $ViewRay^{(R)}$, all Co-60 sources are not located at gantry angle of $0^{\circ}$ while being located at gantry angle of $90^{\circ}$. For this reason, absolute dosimetry was performed based on the measurements in solid water phantom (SWP) and water which determine the SWP to water correction factor. For evaluation of output constancy with gantry angle, measurements were made with ionization chamber inserted in cylindrical water-equivalent phantom. For measured doses in water, the values of dose deviation according to a reference dose of 200 cGy for Head 1, Head 2 and Head 3 were -0.27%, -0.45% and -0.22%, respectively. For measured doses in SWP, the values of dose deviation according to a reference dose of 200 cGy for Head 1, Head 2 and Head 3 were -1.91%, -2.07% and -1.84%, respectively. All values of dose measured in SWP tended to be less than those measured in water by -1.63%. With the reference gantry angles of $0^{\circ}$ and $90^{\circ}$, the maximum values of deviation for Head 1, Head 2 and Head 3 were 0.48%, 1.06% and 0.40%, respectively. The measurement agreement is within the range of results obtainable for conventional treatment machines. The low strength of the magnetic field does not affect dose measurements. Using the SWP to water correction factor, absolute doses for $ViewRay^{(R)}$ system can be measured.