• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.7-13
• /
• 2015

The production processes were reviewed through the injection analysis of the shift lever as a core component of an auto lever installed in the automatic transmission of cars. The injection analysis was carried out for the shift lever and rod among the components in a shift lever module. The shift lever and rod are designed for injection molding with the insertion of a tube, a pin cable plate, and a steel rod for securing the strength of the product. The charging time, failure of injection molding, weld line, air trap, and deformation were reviewed according to this insert. Analyses on various gate positions were carried out for reviewing the cultivation and deformation of fiber around major components, such as the generation section of manipulation feeling and assembly section, so that optimal gate conditions might be reviewed and reflected in the mold design. Finally, we plan to compare the analysis results with the production of trial products.

• Design & Manufacturing
• /
• 제6권1호
• /
• pp.12-17
• /
• 2012

In order to produce high-quality optical components, aspheric lenses have been widely applied in recent years. An aspheric lens consists of aspheric surfaces instead of spherical ones, which causes difficulty in the design process as well as the manufacturing procedure. Although injection molding is widely used to fabricate optical lenses owing to its high productivity, there remains lots of difficulty to determine appropriate mold design factors and injection molding parameters. In the injection molding fields, computer simulation has been effectively applied to analyze processes based on the shell analysis so far. Considering the geometry of optical lenses, a full-3d simulation based on solid elements has been reported as a reliable approach. The present work covers three-dimensional injection molding simulation and relevant deformation analysis of an injection molded plastic lens based on 3d solid elements. Numerical analyses have been applied to the injection molding processes of three aspheric lenses for an image sensing module of a mobile phone. The reliability of the proposed approach has been verified in comparison with the experimental results.

• Design & Manufacturing
• /
• 제11권1호
• /
• pp.14-18
• /
• 2017

Recently, the injection-molded products are lighter, and thinner than ever. In this work, Injection molding simulation was conducted to analysis the filling pattern imbalance in high speed injection molding process for thin-wall injection component, 8 inches LGP. Numerical analysis shows that shear heated polymer near the side wall causes filling imbalance between center and side of cavity. Short shot experiments were conducted and compared with simulation results. Filling imbalance ratio showed a tendency to increase for wider fan gate.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.771-772
• /
• 2006

Mechanical properties of metal injection molded titanium and titanium alloy parts were investigated in this study. Material powders with low oxygen content and spherical shape were obtained by electrode induction-melting gas atomization which could melt and atomize titanium and titanium alloy bars with no touch on crucible or tundish. Tensile specimens were fabricated from obtained powders by metal injection molding process. Tensile strength of the specimens increases with increasing oxygen content. This result corresponds to a tendency of wrought metal.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.773-774
• /
• 2006

Gas surface treatment is considered to be effective for titanium because of its high reactivity. In this study, we investigated the gas nitriding mechanism in titanium sintered parts produced by metal powder injection molding (MIM) process. The microstructure and nitrogen content of sintered MIM parts were greatly affected by nitriding conditions. Nitriding process strongly depended on the specimen size, for example, the size of micro metal injection molding (${\mu}-MIM$) product is so small and the specific surface is so large that the mechanical and functional properties can be modified by nitriding.

• Design & Manufacturing
• /
• 제11권3호
• /
• pp.13-18
• /
• 2017

The injection molding analysis of VCM (Voice Coil Motor) housing for smart phone cameras were performed. We conducted the analysis in terms of injection molding pressure, the formation of weld lines, flow marks, and flow patterns. The goal of the analysis was targeted for the prediction of the optimal gate locations. Because the quality of VCM housing is strongly dependent on the precise control of the camera lens by its nature, we focused on the lens guiding lanes in the VCM housing. We first calculated the maximum injection molding pressure in terms of the filled volumes. The injection molding pressure were calculated within 146MPa at about 90% volume filled. We also investigated the possibility of the occurrence of design-related defects such flow marks, weld lines. Filling patterns regarding the design of the gate locations were delineated to find the weld lines. Throughout the simulations, the final deformations of the lens guiding lanes for the VCM housing were calculated. The deformations distribute ranging from $0.5{\mu}m$ to $2.50{\mu}m$, which were used to find the optimal design of the gates.

• 한국염색가공학회지
• /
• 제34권1호
• /
• pp.46-57
• /
• 2022

In this study, the relationship between fiber orientation and mechanical properties with the injection pressure of polyamide-6/glass fiber composite materials manufactured by the injection molding process was investigated. Also, an actual experimental data and finite element model-based simulation data were analyzed. Specimens were manufactured through the injection molding process setting the injection pressure differently to 700, 800, 900, and 1000 bar, respectively. A morphological analysis and orientation of the PA6/GF composite material were observed using Optical microscope. Through tensile and flexural strength tests, the mechanical properties of the PA6/GF composite materials with the injection pressure were studied. As a result, it was confirmed that the mechanical properties were the superior under the injection pressure of 900 bar molding conditions. In addition, the mechanical properties of the actually manufactured specimen (PA6/GF) and virtual engineering S/W((Digimat, Abaqus) were used to compare and analyze the analysis results for the mechanical properties, and based on the reliable DB, the physical properties of the PA6/GF composite characteristics were studied.

• 대한기계학회논문집A
• /
• 제38권7호
• /
• pp.771-777
• /
• 2014

자동차용 도어그립을 대상으로 하여 3 차원 엠보 패턴이 인쇄된 필름을 적용한 인서트성형을 구현하기 위하여 사출압축성형을 사용하였다. 진공금형을 제작하여 필름 열성형을 하였으며, 필름인서트성형을 위하여 사출압축금형을 개발하였다. 3 개의 압력센서를 설치하여 금형 캐비티압력을 측정하였으며, 다양한 압축스트로크와 토글속도에 대한 사출압축성형 실험을 수행하여, 공정조건이 캐비티 압력과 엠보 패턴의 높이에 미치는 영향을 고찰하였다. 압축스트로크 0.9mm와 느린 토글속도에서 엠보 패턴의 유지율이 높게 나타났다. 또한 엠보패턴이 최대 높이를 갖기 위한 공정조건은 캐비티 압력의 적분값이 최소가 되는 조건과 거의 동일하였다. 사출압축성형을 사용하여 엠보 패턴이 인쇄된 소프트한 촉감을 갖는 플라스틱 제품을 구현할 수 있다.

• 한국자기학회지
• /
• 제11권4호
• /
• pp.157-162
• /
• 2001

Sm-Co계 플라스틱 자석 제조를 위한 사출 성형용 컴 파운드의 제조법을 연구하기 위해 미세분말과 조대분말을 혼합하여 자성분말의 입도 변화, 배합비 및 부피분율에 따른 컴파운드의 유변학적 특성을 조사하였다. 조대분말의 평균입도가 증가하면 분말의 충진율이 증가하여 컴파운드의 점도가 감소하였다. 그러나 미세분말의 평균입도가 작아지는 경우, 미세분말들간의 응집성으로 인하여 오히려 점도가 증가하였다. 기계적으로 분쇄된 Sm-Co계 분말의 경우, 125~75 $\mu\textrm{m}$ 크기의 조대분말과 평균입도 4.9 $\mu\textrm{m}$인 미세분말을 혼합하여 제조된 컴파운드의 점도는 분말의 배합비에 의존하며 조대분말을 60%혼합한 경우 가장 낮은 점도를 나타냈다. 이는조대분말의 양이 60 %일 때 자성분말의 충진율이 최대가 됨을 의미한다. 자성분말의 부피분율에 따른 컴파운드의 점도는 유변학적 모델을 잘 만족시켰으며 사출 성형이 가능한 Sm-Co계 자성분말의 최대 부피분율은 약 66 %이었다.

• Design & Manufacturing
• /
• 제9권2호
• /
• pp.30-33
• /
• 2015

In injection molding, many kinds of defects have occurred because of a characteristic of plastics injection molding. Weld line is one of the defects is formed when separated melt fronts recombine together during the mold filling stage. That is one of problems in injection molding. Weld lines in the appearance of plastics parts can deteriorate visible quality. And most importantly, the local mechanical strength in the weld line area can be significantly weaker. It could be one of the most problems for structural applications. In this study, the mold available two-shot-molding of same polymers have been designed, and a series of experiment about tensile strength in weld line area has been conducted using Taguchi's design of experiment to optimize injection molding conditions decreasing of weld strength and find out a factors affected weld strength in two-shot- molding.