• 공업화학
• /
• 제17권6호
• /
• pp.575-579
• /
• 2006

리튬의 삽입과 탈리가 가능한 탄소전극은 첫 싸이클 동안 카본전극 계면에 solid electrolyte interface가 형성된다. 초기 충전과정에서의 용매분해로 형성된 막은 전지의 성능에 영향을 미치게 되며, 이러한 용매분해는 초기 비가역 용량의 주된 요인중의 하나이다. 본 연구에서는 초기 비가역 반응을 억제하기위해 카본 표면 위에 부동태 막 형성을 위한 첨가제로서 $Li_{2}CO_{3}$을 사용하였다. $Li_{2}CO_{3}$ 첨가 효과를 시간대 전압법, 순환 전압-전류법, 그리고 임피던스법을 이용하여 조사하였고, 또한 SEM, EDX 그리고 XRD를 통해 표면 현상과 조성의 변화를 관찰하였다. 1 M $LiPF_{6}$/EC : MA (1 : 3, v/v) 전해질 용액에 $Li_{2}CO_{3}$의 첨가는 전극 표면에서의 용매분해 억제를 통하여 초기 비가역 용량을 감소시킴을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.341-344
• /
• 2004

The superconducting properties of $YBa_2Cu_3O_x$ with different content impurities of PbO and $BaPbO_3$ were studied. When the PbO was used as an additive in $YBa_2Cu_3O_x$, although the melting point could be reduced, the superconductivity became poor. From the XRD pattern of the sintered mixture of $YBa_2Cu_3O_x$ and PbO it was known that there is a reaction between $YBa_2Cu_3O_x$ and PbO, and the product is $BaPbO_3$. In the process of the reaction the superconducting phase of $YBa_2Cu_3O_x$ was decreased and $BaPbO_3$ would be the main phase in the sample. Therefore, $BaPbO_3$ was chosen as the impurity additive for the comparative study. The single phase of $BaPbO_3$ was synthesized by the simple way from both mixtures of $BaCO_3$ and PbO, $BaCO_3$ and $PbO_2$. Different contents of $BaPbO_3$ (10%, 20%, 30%) were added in the $YBa_2Cu_3O_x$. By the Phase analysis in the XRD patterns it was proved that there was no reaction between $YBa_2Cu_3O_x$ and $BaPbO_3$. When $BaPbO_3$ was used as impurity in $YBa_2Cu_3O_x$ the superconductivity was much better than PbO as an impurity additive in $YBa_2Cu_3O_x$.

• 한국수소및신에너지학회논문집
• /
• 제19권5호
• /
• pp.394-402
• /
• 2008

The Effects of Cu or Ni additives co-added with Ce/Zr mixed oxides to Fe-based oxide mediums were investigated for the purpose of the replacement of Rh, a precious metal additive, in terms of hydrogen storage(reduction by hydrogen) and release(water splitting). From the results of temperature programmed reduction(TPR), initial reduction rate of iron oxide in the mediums was greatly increased with the addition of Cu, similar to that of Rh. For isothermal redox reaction of 10 cycles, the total amounts of hydrogen evolved in water splitting steps for the mediums added with Cu or Ni were highly maintained at ca. 7 mmol/g-material, even though the oxidation rates were slightly lower than that for the medium added with Rh. This result suggests that the replacement of Rh to Cu or Ni is possible as a co-additive for Fe-based oxide mediums.

• 한국전기전자재료학회논문지
• /
• 제13권5호
• /
• pp.402-410
• /
• 2000

The electrical properties and stability of Pr$_{6}$/O$_{11}$-based ZnO wvaristors consisting of ZnO-Pr$_{6}$/O$_{11}$-CoO-Dy$_{2}$/O$_{3}$ based ceramics were investigated in the Dy$_{2}$/O$_{3}$ additive content range o 0.0 to 2.0 mol%. The density was nearly constant 5.62 g/cm$^3$corresponding to 97% of theoretical density as Dy$_{2}$/O$_{3}$ additive content increases up to 0.5 mol%. However the density decreased as Dy$_{2}$/O sub 3/ additive content is further additive content. Pr$_{6}$/O$_{11}$-based ZnO varistors doped with 0.5mol% Dy$_{2}$/O$_{3}$ exhibited a good nonlinearity, which is 37.76 in the nonlinear exponent and 5.36 $mutextrm{A}$ in the leakage current. And they exhibited very stress (0.80 V$_{1mA}$/9$0^{\circ}C$/12h)+(0.85 V$_{1mA}$/115$^{\circ}C$/12h)+(0.95 V$_{1mA}$/1$25^{\circ}C$/12h). Consequently it was estimated that ZnO-0.5 mol% Pr$_{6}$/O$_{11}$-1.0 mol% CoO-0.5 mol% Dy$_{2}$/O$_{3}$ based ceramics will be sufficiently used as a basic composition to develop the advanced Pr$_{6}$/O$_{11}$-based ZnO varistors in the future.he future.uture.he future.

• Journal of Electrochemical Science and Technology
• /
• 제8권2호
• /
• pp.162-168
• /
• 2017

$LiNi_xCo_yMn_zO_2$ cathode materials have been the focus of much attention because of their high specific capacity. However, because of the poor interfacial stability between cathodes and electrolytes, the cycling performance of these materials fades rapidly, especially at high temperatures. In the present paper, we propose the use of tris(trimethylsilyl) phosphate (TMSPO), which contains phosphate and silyl functional groups, as a functional additive in electrolytes. The addition of TMSPO resulted in the formation of cathode electrolyte interphase (CEI) layers on the surfaces of the cathodes and effectively suppressed electrolyte decomposition reactions, even at high temperatures. As a result, cells cycled with TMSPO exhibited remarkable capacity, which remained after 50 cycles (82.0%), compared to cells cycled without TMSPO (64.6%).

• Bulletin of the Korean Chemical Society
• /
• 제34권8호
• /
• pp.2491-2494
• /
• 2013

The effect of additives in an electrolyte solution on the conversion efficiency of a dye sensitized solar cell was investigated. A density functional theory (DFT) method was used to examine the physical and chemical properties of nitrogen-containing additives adsorbed on a $TiO_2$ surface. Our results show that additives which cause lower partial charges, higher Fermi level shifts, and greater adsorption energies tend to improve the performance of DSSCs. Steric effects that prevent energy losses due to electron recombination were also found to have a positive effect on the conversion efficiency. In this work, 3-amino-5-methylthio-1H-1,2,4-triazole (AMT) has been suggested as a better additive than the most popular additive, TBP, and verified with experiments.

• Animal Bioscience
• /
• 제37권2호
• /
• pp.161-172
• /
• 2024

For sustainable development, better performance, and less gas pollution during rumen fermentation, there is a need to find a green and safe feed additive for ruminants. Cysteamine (CS) is a biological compound naturally produced in mammalian cells. It is widely used as a growth promoter in ruminants because of its ability to control hormone secretions. It mainly controls the circulating concentration of somatostatin and enhances growth hormone production, leading to improved growth performance. CS modulates the rumen fermentation process in a way beneficial for the animals and environment, leading to less methane production and nutrients loss. Another beneficial effect of using CS is that it improves the availability of nutrients to the animals and enhances their absorption. CS also works as an antioxidant and protects the cells from oxidative damage. In addition, CS has no adverse effects on bacterial and fungal alpha diversity in ruminants. Dietary supplementation of CS enhances the population of beneficial microorganisms. Still, no data is available on the use of CS on reproductive performance in ruminants, so there is a need to evaluate the effects of using CS in breeding animals for an extended period. In this review, the action mode of CS was updated according to recently published data to highlight the beneficial effects of using CS in ruminants.

• Radiation Oncology Journal
• /
• 제7권2호
• /
• pp.149-156
• /
• 1989

HeLa 세포의 spheroid를 배 양시켜 cis-platinum과 carboplatin으로 처리한 후 그 반응을 세포의 생존분획으로 분석하였다. 체외실험 model인 spheroid를 사용하여 platinum유사체의 약효와 방사선 감수성을 평가하고 약제에 대한 단층 세포와 spheroid의 감수성 차이를 세포-생존곡선에서 규명하기 위하여 본 실험을 시행하였다. Cis-platinum 농도-곡선에서 spheroid의 $Cq=3.4{\mu}M$이고 $Co=1.2{\mu}M$이었다. 이 것은 단층세포에 비하여 Co는 큰 변화가 없으나 Cq가 증가되어 cis-platinum이 저산소층 세포보다 활동적으로 분화하는 표면세포에 주로 작용하였으며, 반대로 carboplatin의 효과는 spheroid에 대한 $(Co=15.0{\mu}M)$ 감수성이 단층세포$(Co=32.5{\mu}M)$에 비하여 크게 증가되어, spheroid의 심층 세포에 주로 작용하였다. 방사선과 carboplation의 병용효과를 세포 생존분획이 0.01 수준에서 isobologram으로 분석한 결과 상호작용으로 supra-additive 효과를 나타내었다. 따라서, carboplatin은 cis-platinum에 비하여 신장과 위장에 대한 독성작용이 적고, 방사선과 병용함으로써 향후 더욱 효과적 인 종양 치료에 중요한 역할을 할 것으로 기대한다.

• 동아시아식생활학회지
• /
• 제20권3호
• /
• pp.382-388
• /
• 2010

This study was aimed to examine the quality characteristics of the bread with the muffin added with the by-product of fermented ethanol from wheat rye that has high $\beta$-glucan contents. In the muffin added with TEFB (Triticale Ethanol Fermentation By-product), the height of the muffin decreased as the additive contents increased. There was no significant difference among the volumes of the muffins added with TEFB 0%, 5%, 10% and 15%. In the muffin added with TEFB, the height of the muffin decreased as the additive contents increased. In the moisture measurement of TEFB muffin, the moisture contents increased as the TEFB additive contents increased. Using SEM, showed that as TEFB additive contents increased, gluten contents was relatively lowered, which led to the reduced gas retention power and generation of rough tissues. In chromaticity, as the TEFB additive contents increased, the brightness decreased and the redness and yellowness decreased as well. The result of texture measurement showed that as the TEFB additive contents increased, hardness increased. springiness decreased gradually as the TEFB additive contents increased. There was no significant difference in cohesiveness (p<0.005). Although there as signigicant difference between the control group and the additive group in gumminess (p<0.005), there was no significant difference for a certain amount of additive contents (p<0.05). While there was significant difference in chewiness between the control group and the additive group (p<0.05). there was no significant difference for a certain amount of additive contents (p<0.05). The result of taste test of TEFB added muffin showed that the preference for the muffins added with 5% or more TEFB decreased. This study found that more than 5% of TEFB additives to muffin decreases the preference level.

• 폴리머
• /
• 제34권5호
• /
• pp.430-433
• /
• 2010

리튬이온 전지에 사용되는 가스켓 재료는 내전해액성, 전기절연성, 압축 영구 줄음률, 비오염성, 저온성이 요구된다. 가스켓 고무에 적용되는 충전제의 특성을 살펴보기 위하여 EPDM(ethylene propylene diene monomer), NBR(nitrile butadiene), FKM(fluoro elastomers)에 카본블랙 및 실리카계 충전제의 함량을 조정하여 compoud를 만들었다. 이렇게 배합된 compound를 리튬이온 전지의 작동 환경을 고려하여 전해액에 대한 장기평가 및 압축 영구 줄음률, 저온성에 대한 평가를 실시하였다. 본 실험에서는 카본블랙 및 실리카계 충전제를 사용하여 각 충전제에 따른 고무재료의 물리적 화학적 특성에 대하여 검토하였다.