• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.41-48
• /
• 2011

Warm-mix asphalt(WMA) technology has been developed to allow asphalt mixtures to be produced and compacted at a significantly lower temperature. The WMA technology was identified as one of means to lower emissions for $CO_2$ and has been spread so quickly in the world. Recently, two innovative WMA additives has been developed to reduce mixing and paving temperatures applied in asphalt paving process in Korea. Since the first public demonstration project in 2008, many WMA projects have successfully been constructed in national highways. In 2010, the WMA field trial was conducted on new national highway construction under Dae-Jeon Regional Construction Management Administration. The two different WMA loose mixtures(WMA and WMA-P) and a HMA mixture were collected at the asphalt plant to evaluate their mechanical performance in the laboratory. The Third-scale Model Mobile Loading Simulator(MMLS3) was adopted to evaluate rutting resistance and moisture damage under different traffic and environmental conditions. In this study, plant-produced WMA mixtures using two WMA additives along with the conventional hot mix asphalt(HMA) mixtures were evaluated with respect to their rutting resistance and moisture susceptibility using MMLS3. Based on the limited laboratory test results, plant-produced WMA mixtures are superior to HMA mixtures in rutting resistance and the moisture susceptibility. The WMA additive was effective for producing and compacting the mixture at $30^{\circ}C$ lower than the temperature for the HMA mixture.

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.1
• /
• pp.55-58
• /
• 2000

Methyl tertiary butyl ether (MTBE) is a gasoline additive that boosts the oxygen content in fuel (an oxygenate), resulting in less air-polluting carbon monoxide being released from vehicle exhaust systems. Then, groundwater contamination problems have been developed in areas where the chemical is used. Common sources of water contamination by MTBE include leaking underground gasoline storage tanks and leaks and spills from above ground fuel storage tanks, etc.. Studies on the chemical and these problems are going on abroad vigorously. These studies should be performed in our country as well more actively. This paper reviews on articles on these studies and focuses on the identification of the chemical as a groundwater contamination source.

• Reproductive and Developmental Biology
• /
• v.29 no.2
• /
• pp.127-131
• /
• 2005

The objective of this study was to examine the effect of EGF on meiotic maturation and pronuclear (PN) formation of porcine oocytes. Prepubertal gilt cumulus-oocyte-complexes (COCs) aspirated from $2\~6mm$ follicles of abbatoir ovaries were matured in TCM199 containing 0.1mg/ml cysteine, $0.5{\mu}/ml$ FSH and LH, and EGF (0, 5, 10, 20, 40 ng/ml) for 22 hr at $39^{\circ}C$ in a humidified atmosphere of $5\%$ $CO_2$ in air. They were then cultured for an additional 22hr without hormones. In Experiment 1, to examine the nuclear maturation at 44hr of culture, the expanded cumulus cells were removed by vortexing for 1 min in 3 mg/ml hyaluronidase. The oocytes were fixed in acetic acid: methanol (1:3, v/v) at least for 48 hr and stained with $1\%$ orcein solution for 5 min. Nuclear status was classified as germinal vesicle (GV), germinal vesicle breakdown (GVBD), prophase-metaphase I (PI-MI), and PII-MII under microscope. In Experiment 2, to investigate PN formation, oocytes were fertilized with Percoll-treated freshly ejaculated sperm $(1\times10^5\; cells/ml)$ in mTBM with $0.3\%$ BSA and 2mM caffeine for 5hr, and cultured in NCSU-23 medium with $0.4\%$ BSA. At 6hr of culture, the embryos were fixed in $3.7\%$ formaldehyde for 48hr and stained with 10ug/ml propidium iodide for 30 min. PN status was classified as no or one PN (unfertilized), 2 PN (normal fertilized) and $\geq3$ PN (polyspermy). Differences between groups were analyzed using one-way ANOVA after arc-sine transformation of the proportional data. The rate of oocytes that had reached to PII-MII were significantly (P<0.05) higher in all groups added EGF than that of non-treated group $(67\%)$, but it did not differ among the all added groups $(86\%,\;85\%,\;79\%\;and\;81\%$, in 5, 10, 20 and 40 ng/ml EGF, respectively). No differences on the incidence of 2PN were observed in all treated groups $(25\%,\;30\%,\;33\%,\;29\%\;and\;29\%$, in 0, 5, 10, 20 and 40 ng/ml EGF, respectively), however, in non-treated group, polyspermy tended to be increased ($66\%\;vs\;. 58\%,\;54\%,\;52\%\;and\;55\%$, 0 vs. 5, 10, 20, 40 ng/ml EGF, respectively). These results suggest that EGF can be effectively used as an additive for enhancing oocyte maturation and reducing the incidence of polyspermy in pig.

• Resources Recycling
• /
• v.19 no.5
• /
• pp.31-43
• /
• 2010

To fabricate porous SiC candle filter for filtration facility of the IGCC system, the candle type filter preforms were fabricated by ramming and vacuum extrusion process. A commercially available ${\alpha}$-SiC powders with various particle size were used as starting raw materials, and $44\;{\mu}m$ mullite, $CaCO_3$ powder were used as non-clay based inorganic sintering additive. The candle typed preforms by ramming process and vacuum extrusion were sintered at $1400^{\circ}C$ for 2h in air atmosphere. The effect of forming method and particle size of filter matrix on porosity, density, strength (flexural and compressive strength) and microstructure of the sintered porous SiC candle tilters were investigated. The sintered porous SiC filters which were fabricated by ramming process have more higher density and strength than extruded filter in same particle size of the matrix, and its maximum density and 3-point bending strength were $2.00\;g/cm^3$ and 45 MPa, respectively. Also, corrosion test of the sintered candle filter specimens by different forming method was performed at $600^{\circ}C$ for 2400h using IGCC syngas atmosphere for estimation of long-term reliability of the candle filter matrix.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.5
• /
• pp.554-563
• /
• 2016

Ships are capable of operating on residual fuel oil. Recently, various attempts have been made to meet environmental regulations and with ships operating on residual fuel oil. One way of fulfilling these requirements is by using fuel additives. Dispersants and fuel combustion improvers will have a positive effect on improving the combustion characteristics of the residual fuel oil. As such, this study examines fuel oils blended with additives by using fuel combustion analysis (FIA/FCA) and thermogravimetric analysis (TGA). The results of FIA/FCA focuse only on the amount of work done by the fuel oil. Therefore, it is recommended in this study that a new method to evaluate the combustion efficiency via FIA/FCA processes be developed. The analysis with ROHR curve gained by FIA/FCA brought similar results with pressure trace curve therefore it can be said that new analysis method can be reliable. The TGA, analysis process is very sensitive to the evaporation of fuel, for example, which could be addressed. In the performance-related findings of this study, blended samples with additives containing iron compounds showed a greater improvement in early combustion characteristics than samples without additives.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.109-113
• /
• 2011

Crystallization of calcium carbonate were performed by adding aspartic acid and lysine into $CaCl_2$ solution for understanding biomineralization in gas-liquid reaction of $NH_4HCO_3$ and $CaCl_2$. Proportion between calcite and vaterite of calcium carbonate crystals was identified by changing conditions such as reaction time, addition amount of aspartic acid, lysine, $CaCl_2$, and $NH_4HCO_3$. FT-IR(Fourier Transform Infrared spectroscopy) instrument was used to perform analysis of vaterite ratio. Under the condition of $NH_4HCO_3$ 10 g and no additive, an increase of vaterite crystal changed to a decrease around 0.15 M $CaCl_2$. Then it largely increased at 0.25 M $CaCl_2$, after vaterite proportion was rising again at 0.20 M $CaCl_2$. In contrast to that, vaterite crystal continuously decreased to 0.2 M $CaCl_2$, and increased from 0.25 M $CaCl_2$ with 20 g $NH_4HCO_3$. Vaterite crystals were observed to be a maximum after 2days with lysine addition, but $CaCO_3$ vaterite crystals showed minimum with aspartic acid.

• Korean Journal of Environmental Biology
• /
• v.17 no.3
• /
• pp.331-335
• /
• 1999

The present study was carried out to investigate the combined effect of radiation and photoperiod (PP) regimes on Tradescantia 4430 somatic cell mutations. Potted plants were irradiated with 0.3, 0.5 and 1.0 Gy of gamma radiation from 60Co source. The plants irradiated only with gamma radiation were used as control group (CT). The somatic cell mutation rate in 0.5 Gy irradiated CT and PP20 group started to increase on the 6th day and reached a maximum value on the l0th day and 9th day after irradiation while the rate in the experimental group under 4 hours of photoperiod a day (PP4) started to increase on the l0th day and reached a maximal value on the 16th day post-irradiation. The slope of dose-response curve in CT was 5.99 ($r^2$=0.99), while it was 6.93 ($r^2$=0.98) in PP20 and 11.74 ($r^2$=0.99) in PP4, respectively. The biological efficacy of radiation in the induction of pink mutation increased by 15.7% in PP20 and 95.9 % in PP4, respectively. It is suggested that photoperiod regimes unfavorable to the plant have an additive effect on radiation-induced mutations and a delaying or inhibiting effect on cell damage repair, as well.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1132-1141
• /
• 1996

Heterogeneous cation exchange membrane(HCEM) was prepared with LLDPE(Linear Low Density Poly-ethylene) as binder, powdered cation exchange resins($diameter{\leq}149{\mu}m$) as ion-exchange material and glycerol as additive for electrodialysis and electrodeionization system. The weight ratio of (binder/ion exchange)/glycerol was (60%/40%)/5%, (55%/45%)/5%, (50%/50%)/5% and (40%/60%)/5%. The characterization of prepared HCEM was evaluated on mechanical, electrochemical, morphology and ion permeable properties. It was compared with commercial membrane. Electrochemical properties of HCEM of (50%/50% )/5% were very similar to value of IONPURE(commercial membrane), in which ion exchange capacity, ion transfer number and membrane resistance were to be 1.733meq/g, 0.96 and $16.08{\Omega}/cm^2$, respectively. Ion permeability of the membrane was better than that of IONPURE membrane. Compared with IONPURE membrane, the HCEM had a higher tensile strength and lower elongation and modulus, in which HCEM had tensile strength of $62.33kg/cm^2$, elongation of 87.42% and modulus of $658.53kg/cm^2$. The HCEM of (50%/50% )15% was optimum combination.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.201-205
• /
• 2007

Biodegradable polymers such as polylactide, polyglycolide and poly (lactide- co-glycolide) (PLGA) have been extensively investigated because of easily controlled drug release rate, completely degradable materials without the toxic by-product, and good biocompatibility. But, according to the bulk erosion property of PLGA in vitro test, it had the disadvantage that first-order release reduced releasing amount slowly after excessive initial burst. In this study we used PLGA powder obtained through recrystallization to revise bulk erosion property of PLGA. The PLGA used in this study was prepared by vacuum drying method and to estimate release profiles of BCNU loaded PLGA wafer. We also evaluated the release profile of drug with the water soluble additive. It was found that the drug loaded PLGA recrystallized by vacuum drying method exhibited the initial burst and the constant rate of drug release compared to that prepared by a conventional method.

• Korean Journal of Food Science and Technology
• /
• v.7 no.2
• /
• pp.61-68
• /
• 1975

This study was conducted (1) to isolate the film-forming yeast from the commercially available soy sauce, (2) to identify the state of soy sauce fermentation by the use of yeasts, (3) to confirm characteristics of yeasts. The result were as follows. 1. These yeast strains in the soy sauce fermentation test showed full fermentation of whole sugar content, reduction of the pure extract and relative reduction in total nitrogen. Soy sauce color was somehow faded to lower the stability of soy sauce. 2. In anti-fungal activity test butylparaben at a higher level 60 ppm., sodium propionate 2,400 ppm, sodium benzoate 800 ppm., menadion 165 ppm, showed their anti-fungal effect, while alcohol did not show the effect in the 3% additive group. 3. The optimum sodium chloride concentration for these strains in the 2% G.Y.P. medium was 5% and optimum temperature was $30^{\circ}C$. The extinction temperature was $62^{\circ}C$ for strain No-1 and No-3, and was $65^{\circ}C$ for No-2 and No-4. 4. The film-forming soy sauce turned out in the gas chromatogram to possess much flavor of low boiling point as compared with the standard. These flavors were considered due to flavor spoilage of the soy sauce. 5. These isolated yeasts were identified Saccharomyces rouxii (film-forming yeast) in the Lodder's taxanomic study.