• Journal of Preventive Medicine and Public Health
• /
• v.21 no.2 s.24
• /
• pp.224-237
• /
• 1988

To determine the causes of and related factors to childhood injuries, the emergency room records and inpatient medical records were reviewed for 4,849 injured children out of 15,790 pediatric patients(<15 years old) who visited the emergency rooms of 3 university hospitals and 2 general hospitals in Taegu from 1 January to 31 December 1987. Out of total injured children, 54.675 were 3-8 years old and the male to female ratio of the total injured children was about 2:1. The leading causes of injury were falls and slips (29.1%) and traffic accident(28.2%). The frequency of injury was higher in May-October than the rest of months and 51.6% of the injuries occurred between 15 and 20 o'clock. Falls and slips took place most frequently at the stairway(25.7%). The most common interpersonal violence was inflicted injuries(85.6%) and there were 11 child rapes. Dog bites accounted for 67.6% of all biting injuries and it occured 2.9 times more in male than in female. CO intoxication was the most common cause of poisoning (45.3%) and scalding accounted for 85.2% of all burns. Common places of drownings were river (32.2%), swimming pool (22.6%) and construction site(19.3%). To prevent childhood injuries, it is recommended to eliminate the hazardous environmental factors, to provide safe playgrounds, to educate the children for safety from kindergarten and the general public through mass communication, to establish a strict safety standard for houses, public buildings and facilities, and playgrounds.

• Journal of Wetlands Research
• /
• v.19 no.1
• /
• pp.30-36
• /
• 2017

SS(Suspended Solid) concentration by soil erosion into river at normal and flood season should be measured. However, to present the variation of SS due to various development project such as EIA(Environmental Impact Assessment), River Master Plan, and so on, it is necessary to estimate not measure SS, but there are not exist how to estimate SS. In the present study, therefore, we propose the hydrologic method of estimating SS concentration using the results of particular frequency flood discharge and sediment discharge by RUSLE method. SS consists of silty and clay soil and colloid particle etc. However, in the present study, silty and clay soils of sediment discharge except send set up SS standards. The flow discharge to estimate SS concentration are 1~2 years for normal season, 30~100 years for flood season. Meanwhile, analysis software for probable rainfall uses Fard2006, probable rainfalls under 2-year frequency are estimated using rainfall data and frequency factor of Gumbel distribution. The results of estimating SS concentration using runoff volume by sediment and flow discharges of silty and cray soils as above method show that reliable level of SS concentration is considered in predevelopment of natural condition and under development of barren condition. Especially, SS concentration takes notice that the value of sediment discharge makes a huge difference according to channel slope, it was confirmed that the value obtained by dividing the SS concentration by the channel slope is relatively constant even though the topographical factors are different. Therefore, if the present study will be proceeded for various watersheds, it will be developed as estimation method of SS concentration.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.3
• /
• pp.169-177
• /
• 2014

BACKGROUND: The ferronickel and rapid cooling slags used in present study are industrial wastes derived from a steel factory in Korea. These slags are used as almost road construction materials after magnetic separation. However, the use of slag to remove phosphorus from wastewater is still a relatively less explored. The objective of this work was to evaluate the feasibility of ferronickel slag (FNS) and rapid cooling slag (RCS) as sorbents for phosphorus removal in wastewater. METHODS AND RESULTS: Adsorption experiments were conducted to determine the adsorption characteristics of the FNS and RCS for the phosphorus. Adsorption behaviour of the phosphorus by the FNS and RCS was evaluated using both the Freundlich and Langmuir adsorption isotherm equations. FNS and RCS were divided into two sizes as effective sizes. Effective sizes of FNS and RCS were 0.5 and 2.5 mm, respectively. The adsorption capacities (K) of the phosphorus by the FNS and RCS were in the order of RCS 0.5 (0.5105) > RCS 2.5 (0.3572) ${\gg}$ FNS 2.5 (0.0545) ${\fallingdotseq}$ FNS 0.5 (0.0400) based on Freundlich adsorption isotherm. The maximum adsorption capacities (a; mg/kg) of the phosphorus determined by the Langmuir isotherms were in the order of RCS 0.5 (3,582 mg/kg) > RCS 2.5 (2,983 mg/kg) > FNS 0.5 (320 mg/kg) ${\fallingdotseq}$ FNS 2.5 (187 mg/kg). RCS 0.5 represented the best sorbent for the adsorption of phosphorus. In the experiment, the Langmuir model showed better fit with our data than the Freundlich model. CONCLUSION: This study indicate that the use of RCS in constructed wetlands or filter beds is a promising solution for phosphorus removal via adsorption and precipitation mechanisms.

• Horticultural Science & Technology
• /
• v.31 no.6
• /
• pp.782-789
• /
• 2013

Carrot (Daucus carota L. var. sativa) is one of the most widely used crops in the world and is nutritionally important crop. However, seed-hair which is generated in epidermal cell of seeds causes the difficulty of the seedling process, because of the seed germination and absorption inhibitions. For these reasons, carrot seeds are commercialized after mechanical hair removal process. However, in this process, various damage and seed loss occur and breeding of hairless-seed carrot cultivar is needed to overcome these various weaknesses and additional seed production costs. In this study, cDNA libraries using 2 combinations, which were composed of short-hair seed CT-ATR 615 OP 666-13 & long-hair seed CT-ATR 615 OP 671-9, and short-hair seed CT-SMR 616 OP 659-1 & long-hair seed CT-SMR 616 OP 677-14, were constructed and EST sequences of each individuals were analyzed to reveal carrot seed-hair characteristics. Firstly, analyzed EST sequences were classified into FunCat functional categories. As a result, significant differences have been identified in metabolism category, protein folding and stabilization, protein binding, C-compound binding category from both of two combinations. Secondly, several candidate EST sequences related to seed trichome differentiation and cellulose biosynthetic process were selected based on GO data of EST sequences. These differences based on FunCat categories and candidate EST obtained by GO data analysis are thought to be involved in the formation of carrot seed hair. Finally, 741 SSR sites and 33 SNP sites were identified from analyzed EST sequences of two combinations. Then we designed SNP and SSR primer sets to develop molecular markers. These molecular markers will be used for classification of carrot cultivars and study seed-hair characteristic.

• Journal of Korea Water Resources Association
• /
• v.42 no.2
• /
• pp.141-148
• /
• 2009

Each river in each country has peculiar channel characteristics at every section. Korea consists of mountains at the rate of 70%. Due to this, the sections that display unique channel form are scattered. One of the typical features is the narrow pass of channel section that presents in the process of the generation of alluvial channel and deformation channel. Around as this narrow pass of channel, it often comes to be regular flood disaster section. Regardless of this situation, investigations and plans that reflect channel characteristics at the narrow pass of channel have been wholly wanting until now. In accordance with this, we have investigated and analysed hydraulic significance and channel form of the narrow pass of channel in Seonsan in this study. The study has found real minute classification of sediment phenomenon at river bed of low flow channel on investigation section which is sand-bed river, but it was vaguely difficult to conclude that classification of sediment arises from explicit natural force. We were able to assume that the phenomenon comes from gentle bed slope, supply of river bed materials which is nearly uniformity. However, classification of sediment would come from collecting an aggregate rather than natural force. And we found that compound cross section conversion has been developing dramatically with channel form of movable bed section referring to movement which was active before at drainage district of the narrow pass of channel. With this, we could find the phenomenon that river width of low flow channel diminished largely. This kind of situation implies that it may cause compound section weighting, flood dimension decreasing, revetment at low flow channel or the local scour at bottom of levee when extraordinary flood occurs.

• Journal of the Korean Geographical Society
• /
• v.42 no.1 s.118
• /
• pp.133-155
• /
• 2007

The sustainable urban development has emerged as a new paradigm of urban studies in recent years. A review of the literature of land use and transport policies in relation to sustainable development reveals a consensus that the main objectives of sustainable strategy should decrease the numbers and length of journeys, and change the land use pattern towards mixed use and high density. However, there is a lack of empirical research as to what types of policies might influence effectively the reduction in the energy consumption and emission of $CO_2$. in order to sustain urban development. This paper tries to construct the conceptual structure of the PSS(planning support system), which is designed to the simulation of the probable effects of policies and planning of different kinds in cities, and evaluate the sustainablilty level according to construct the structure of the PSS(planning support system), which is designed to the simulation of the probable effects of policies and planning of different kinds in cities, and evaluate the sustainablilty level according to the alternative scenarios. The PSS is composed of three components (input-modeling-output). The core of PSS is integrating land use-transport-environment modeling. The advantages of integrating land use-transport-environment modeling are well known, but there are very few such integrated modeling packages in practice. So this paper tries to apply TRANUS software, which is an integrated land use and transport model. The TRANUS system was calibrated to city of Yongin for the base year. The purpose of the application of TRANUS to Yongin is to examine the operability of TRANUS system in Korea. From the outputs and results of operating the system, TRANUS may be effectively used to evaluate the effects of alternative sustainable urban development policies, since sustainablilty indicators can be extracted from several aspects such as land use consumption, total trips, distance and cost, energy consumption, ratio of transport split.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.471-490
• /
• 2016

This study investigated provenance of raw materials and making technique of lime-based materials used in the tomb barriers of the Yesan Mokri tombs from Joseon dynasty on the basis of analysis to material characteristics and physical properties. In the barrier materials, dry density and porosity are the highest value ($1.82g/cm^3$) and the lowest value (25.20%) in the south wall of No. 1 tomb, respectively. Dry density and porosity are inversely proportional in all barrier materials, but unconfined compressive strength, which is the highest value of $182.36kg/cm^2$ in the No. 2 tomb, does not show an interrelation with porosity and density. Mineral components in the lime-soil mixtures of the tomb barrier are mainly quartz, feldspar, mica and calcite about 200 to $600{\mu}m$ size with yellowish brown matrix. Hydrotalcite and portlandite are detected in the lime mixture, and kaolinite in the soils. The lime materials of the tomb barrier occurred in large quantities weight loss and variable endothermic peaks caused by decarbonization reaction of $CaCO_3$ in the range from 600 to $800^{\circ}C$ in thermal analysis. Making temperature of lime for the tomb barrier is presumed approximately about $800^{\circ}C$ based on the occurrences, compositions and thermal analysis. The tomb barriers are revealed to very wide composition ranges of major elements and loss-on-ignition (22.5 to 33.6 wt.%) owing to mixture of the three materials (lime, sand and clay). It is interpreted that low quality construction technique was applied as the limes are very heterogeneous mixture with aggregates, and curing of the lime was poorly processed in the tomb barriers. Possible limestone sources are distributed in many areas around the Mokri site where limestone conformation and quarries for commercial production are found within Yesan and Hongseong areas. Therefore, we estimated that raw materials were possibly supplied from the local mines near the Mokri site.

• Korean Journal of Environment and Ecology
• /
• v.21 no.5
• /
• pp.400-414
• /
• 2007

This study has analyzed the vegetation structure to suggest a vegetation ecological restoration model by using the case of the afforestation for erosion control area with Pinus koreaiensis and Betula platyphylla, etc., on the hills of the Young-in mountains after its great fire in 2000. Of the area having a dimension of $1,152,404.3m^2$ selected as a survey site for the existing vegetation, the forest fire area accounted for 69.2% among which, brushwoods accounted the most for 24.67%. As a result of analysis of the 27 surveyed unit plots[unit dimension: $100m^2$] set up in consideration of the existing vegetation pattern and damaged state from the forest fire, the surveyed area was classified into 10 communities. Shrub layer's vegetation was found to be dominant in forest fire areas and the surveyed sites were classified into 5 plant communities, i.e. P. koraiensis community, Quercus variabilis community, P. thunbergii community, Q. serrata community, B. platyphylla community in forest fire areas, while non-forest fire areas were classified into 5 plant communities, such as P. densiflora community, Q. acutissima community, Q. serrata community, Q. mongolica-Q. serrata community, B. platyphylla community. Species diversity of forest fire areas was $0.3679{\sim}0.5907$ and that of non-forest fire areas was $0.5728{\sim}0.8865$. In addition, the number of the species in the forest fire areas was $5{\sim}8$ and that of non-forest areas was $8{\sim}12$; however, the population of forest fire areas$(156{\sim}456)$ was higher than that of non-forest fire areas$(61{\sim}227)$. In the analysis of growth density per layer$[of\;100m^2]$, there appeared $1{\sim}8$ trees of Q. mongolica and $3{\sim}5$ trees of Q. serrata in the upper layer species; $2{\sim}4$ trees of Q. serrata and one tree of Q. mongolica in the canopy layer. As for the characteristics of soil, acidity of forest fire areas was pH 5.45 and that of non-forest fire was pH 5.25. By setting up the middle D.B.H range of Q. mongolica-Q. serrata community as the vegetation restoration model, planting species, planting density and planting models are suggested.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.1
• /
• pp.57-67
• /
• 2017

Based on the study on place name, meaning analysis of buddhist temple Palgyeng, and classifications of instructions and characteristics of writings on rocks, the main results of the study showed the following. Cheongamsa is located in the upstream of Muheulgugok Valley which was run by Hangang Jeong Gu(寒岡 鄭逑), a typical young man in the middle of the Joseon Dynasty, and overlaps with chief monk Byukam Lee Dukjin's(1896~?) object of Cheongamsa Palgyeng during Japanese colonial era. Including the mountain embracing Cheongamsa called Bullyeong-san, various characteristics of writings on rocks such as use of combination of place names including Sudosan, Seonlyeongsan, and Sinseondae, as well as Cheongamsa Temple, Bullyeongdongchun(佛靈洞天), Namuabitabul, Hogye(虎溪), Yeosan Waterfall(廬山瀑布), and Sejinam(洗 塵巖) show co-existence of Confucianism and Taoism mixed together in the temple. Especially for Cheongamsa Valley Hogye and Samsocheon(三笑泉) which is in the precincts of the temple, are realized as the symbol of the scenery of the three religion consilience of Confucianism, Buddhism, and Taoism through announcement using Hogyesamso(虎溪三笑) which originated from Yeosan Donglimsa, Jiangxi, China. Also, there are Yeosan Waterfall with a noble sense of place by negotiating with god, writing on rocks imprinted, and Yeosangyo(廬山橋) in Cheongamsa. As such, cultures of the three religion remain in various layers with the spirit of Hogyosamso symbolizing the consilience and coexistence of the three religion in Cheongamsa without the exclusiveness of Buddhism. Besides, the third precept of Yukhwagyeongbub, known to be practiced in Buddhist temples, which says "Do not only express self-assertion and ignore others" according to the dogma of working together in harmony, is in accordance with the spirits of Hogyesamso. As shown, Gimcheon Cheongamsa which is adorned with cultural landscapes of Hogyesamso, Gugokdongcheon(九曲洞天), and Palgyeng(八景), is not only good enough for the way of Buddhism and Confucianism but also for a place for the three religion consilience embracing the three religion.