• 한국콘텐츠학회논문지
• /
• 제10권11호
• /
• pp.228-234
• /
• 2010

치과도재용 합금으로 사용되는 합금 중 베릴륨이 함유된 비귀금속 Ni-Cr합금과 베릴륨이 함유되지 않은 비귀금속 Ni-Cr합금 그리고 베릴륨이 함유되지 않은 비귀금속 Co-Cr 합금과 세라믹간의 결합강도와 파절양상 그리고 계면특성을 분석하고자 하였다. 결합강도는 만능시험기를 이용하여 전단력시험을 통하여 전단결합력을 측정하였으며, 전단시험에 의한 파단면을 이용하여 파절양상을 관찰하였다. 그리고 합금-도재간의 계면을 관찰하였다. 전단결합강도 측정 결과, 베릴륨이 포함된 T-3가 41.13(${\pm}5.11$)MPa로 가장 높게 나타났으며, 베릴륨이 포함된 VeraBond(40.72(${\pm}5.98$)MPa), Co-Cr 합금인 Wirobond(38.40(${\pm}9.66$)MPa), 베릴륨이 포함되지 않은 Verabond 2V(32.77(${\pm}4.31$)MPa), Bellabond N(28.63(${\pm}6.39$)MPa), Bellabond plus(24.97(${\pm}6.13$)MPa), Argeloy N.P. Star(22.69(${\pm}3.41$)MPa) 순으로 나타났다. 비귀금속 합금들과 세라믹간의 파절양상은 모든 시편에서 금속표면에 세라믹이 일부 부착된 복합파절(mixed failure) 양상을 보였다.

• 한국환경생태학회지
• /
• 제12권1호
• /
• pp.22-29
• /
• 1998

충남지역의 사문암과 변성암 및 흑색셰일지역의 암석, 토양 및 그 위에서 생육하는 리기다소나무의 미량원소 함량을 측정하여 모암별 토양의 원소함량과 식물체의 흡수확계를 조사하였다. Ni, Cr 및 Co 함량은 사문암에서 매우 높았으며, Zn, Mo 및 Fe 함량은 변성암에서 높았다. 흑색셰일의 이들 원소는 사문암과 변성암보다 공히 낮았다. 사문암 토양의 Ni, Cr 및 Co 함량은 매우 높았으며, Zn과 Fe 함량은 사문암+변성암 혼합풍화토 및 흑색셰일 토양에서 높았다. 풍화토의 미량원소 함량은 암석의 함량보다 낮았으며, 그 패턴은 Mo를 제외하고는 모두 유사하였다. 사문암 풍화토의 pH 범위는 7.73~9.55로 매우 높았다. 사문암지역 리기다소나무의 Cr 흡수량은 토양내 Cr함량에 비하여 낮았으며, Zn 은 토양내의 원소함량에 비하여 리기다소나무에 의한 흡수량이 높았다. 리기다소나무에 의하여 흡수된 Ni, Fe 및 Co 함량에 대한 Fe/Ni, Co/Ni 비율은 사문암풍화토에서 가장 낮았다.

• 한국가축번식학회지
• /
• 제18권1호
• /
• pp.7-13
• /
• 1994

To verify in vivo viability of IVF-derived bovine embryos, morula and blastocysts that developed from in vitro matured and fertilized ova were transferred to the uteri of recipient cows and normal calves were produced. To produce IVF-derived bovine morula or blastocysts, ova matured and fertilized in vitro were cultured in culture medium for 7~8 days at 39$^{\circ}C$ under the humicified atmosphere of 5% CO2. Two different culture systems, a co-culture system with TCM-199 and bovine epithelial cells (BOEC) and CR1aa without somatic cell support, were compared. Cleavage rates to 2~8 cell stage and developmental rates of IVF-derived bovine embryos to blastocyst stage were not different between co-culture system (51.3 and 14.0%) and CR1aa medium (60.4 and 22.1%), respectively. Embryos were classified into three grades by embryo quality and then one or two embryos in higher quality(A and B grades) were transferred to the uterus of recipients. In this study Korean Native calf was first born after transfer of IVF-derived embryos. Total four live calves were normally developed to term from IVF-derived bovine blastocysts and one female fetus was still-born approximatedly 8 months of gestation, but there was no pregnancy after transfer of morula. Therefore, normal calves could be produced after transfer of IVF-derived bovine embryos cultured in CR1aa medium without somatic cell support. In addition, our results suggest that in transfer of IVF-derived bovine embryos blastocyst stage is better than morula.

• 열처리공학회지
• /
• 제23권1호
• /
• pp.17-22
• /
• 2010

The enhancement of adhesion for Cr film on polycarbonate (PC) substrate with electron irradiation treatment was considered. The electron treatment changes the contact angle of the PC substrates. As increase the electron energy from 300 eV to 900 eV, the contact angle decreases from $90^{\circ}$ to $60^{\circ}C$. It is supposed that electron treatment changes the chemical property of PC substrate into hydrophilic one. The micro surface roughness was also affected by electron treatment. The PC substrates irradiated with intense electron beam of 900 eV show the rougher surface than those of other PC substrates. Cr thin films deposited on the PC substrate treated with electron irradiation at 900 eV show the higher adhesion than that of the Cr thin film deposited untreated bare PC substrates.

• 한국자동차공학회논문집
• /
• 제22권4호
• /
• pp.65-71
• /
• 2014

As an important component of a fuel cell, the bipolar plate comprises a large proportion in the fuel cell's volume, weight and price. The bipolar plate is the most widely used; however, graphite bipolar plate is large in volume, brittle and therefore easily broken during assembling. In addition, due to its poor machinability, production costs a lot, unless mass production. Compared with the graphite bipolar plate, the metal bipolar plate has good machinability, high electric conductivity and strong mechanical strength; however, it corrodes easily and has a high contact resistance, so in order to prevent corrosion and reduce the contact resistance, the basic metal needs to be processed by use of electro polishing and coating. The water which is produced by electrochemical reactions in the fuel cell must be discharged smoothly. In this study, in order to prevent corrosion the processes of electro polishing and CrN coating were used. According to the presence or absence of these processes, the contact angles can be measured and different metal bipolar plates can be made, these plates can be used for comparing and analyzing the performance of the fuel cell.

• 한국분말재료학회지
• /
• 제22권6호
• /
• pp.408-412
• /
• 2015

This study attempts to manufacture a Ni-Cr-Al-Y coating layer using a kinetic spray process and investigates the microstructure and physical properties of the manufactured layer. The Ni-22Cr-10Al-1Y (wt.%) composition powder is used, and it has a spherical shape with an average diameter of $23.7{\mu}m$. Cu plate is used as the substrate. Optical microscope, X-ray diffraction, scanning electron microscope and Vickers hardness test are carried out to characterize the macroscopic properties of the coating layer. Furthermore, the coating layer underwent vacuum heat treatment at temperatures of $400^{\circ}C$ and $600^{\circ}C$ for 1 hour to check the effect of heat treatment temperature on the properties. The manufactured coating layer is 1.5 mm thick, and featured identical phases to those found in the powder. The porosity of the coating layer is measured at 2.99%, and the hardness is obtained at $490.57H_v$. The layer shows reduced porosity as heat treatment temperature increased, and hardness is reduced at $400^{\circ}C$ but shows a slight increase at $600^{\circ}C$. Based on the findings described above, this study also discusses possible manufacturing methods for a Ni-Cr-Al-Y coating layer using the kinetic spray process.

• 치위생과학회지
• /
• 제15권5호
• /
• pp.536-541
• /
• 2015

본 연구에서는 CAD/CAM 시스템을 이용하여 제작한 코발트-크롬 주조 금속 코핑과 코발트-크롬 소결 금속 코핑의 변연 및 내면 적합도를 비교 평가하여 다음과 같은 결론을 도출하였다. 코발트-크롬 금속 코핑의 변연 및 내면 적합도를 비교 평가는 기존의 주조방식인 CCM 그룹보다 소결과정만으로 제작한 CSM 그룹이 전반적으로 모두 우수하였다. 또한 CSM 그룹의 변연 적합도는 임상적으로 허용할 수 범위인 $120{\mu}m$ 이내 존재하였다는 결과를 통해서 그동안 매몰, 소환, 주조인 복잡한 과정을 거치면서 보철물의 오차가 발생 하였으나 소결과정만으로 공정 과정의 오차를 줄임으로써 완성도 높은 코발트-크롬 금속 코핑 제작이 가능하다고 생각된다.

• 한국대기환경학회지
• /
• 제5권1호
• /
• pp.22-32
• /
• 1989

In order to assess the level of atmospheric pollution and to contribute the health improve ment of residents in Pusan, the authors measured the $CO, SO_2, NO_2, TSP, Noise, Pb, Cd, Cr and V$ level at 3 place by time from Jan. 1988 to Feb. 1988. THe places were Kukje, Daehyeon, Pujeon underground commercial floor. The results were as follows; 1. The range of concentration of air pollutants (1) CO : 0.5 - 3.0 ppm (2) $SO_2$ : 0.012 - 0.360 ppm (3) $NO_2$ : 0.018 - 0.089 ppm (4) TSP : 30 - 330 $\mug/m^3$ (5) Pb : 0.219 - 3.116 $\mug/m^3$ (6) Cd : 0.000 - 0.070 $\mug/m^3$ (7) Cr : 0.378 - 4.098 $\mug/m^3$ (8) V : 0.000 - 1.010 $\mug/m^3$ (9) Noise : 47 - 77 dB(A) 2. The level of all air pollutants were higher in the afternoon or night than in the morning. 3. The mean concentration of $SO_2$ in all places exceede the ambient air quality standard of $SO_2$,.

• 한국환경과학회지
• /
• 제22권8호
• /
• pp.945-951
• /
• 2013

Alumina-supported catalysts containing different transition metals such as Cu, Cr, Mn, Zn, Co, W were investigated for their activity in the selective oxidation of toluene. Catalytic oxidation of toluene was investigated at atmospheric pressure in a fixed bed flow reactor system over transition metals with $Al_2O_3$ catalyst. The result showed the order of catalytic activities for the complete oxidation of toluene was Mn > Cu> Cr> Co> W> Zn for 5wt.% transition $metals/Al_2O_3$. $Mn/Al_2O_3$ catalysts containing different amount of Mn were characterized by X-ray diffraction spectroscopy for decision of loading amount of metal to alumina. 5 wt.%$Mn/Al_2O_3$ catalyst exhibits the highest catalytic activity, over which the toluene conversion was up to 90% at a temperature of $289^{\circ}C$.

• 한국수정란이식학회지
• /
• 제10권1호
• /
• pp.53-63
• /
• 1995

The effects of different protein sources (serum vs bovine serum albumin), growth factors (EGF and PDGF) and co-culture with various type of somatic cel1s (BOEC, MEF and BRL) on the in vitro development of in vitro matured / in vitro fertilized bovine oocytes were examined, and the viability of frozen/thawed embryos derived from IVM /IVF was examined. Cell numbers of blastocysts were also counted. In Experiment 1, CR$_1$aa with serum was superior to CR$_1$aa with BSA in producing morulae plus blastocysts from IVM /IVF oocytes(24.4% vs 30.4%, p>0.05). In Experiment 2, more morulae plus blastocysts(42.3%) were produced in CR$_1$aa containing long /ml EGF than in the control CR$_1$aa(33.3%). In Experiment 3, 2- to 8-cell embryos derived from IVM /IVF oocytes were randomly allotted to one of 4 culture groups : a) CR$_1$aa ; b) CR$_1$aa + ing /ml PDGF ; CR$_1$aa + Sng /ml PDGF ; CR$_1$aa + lOng /ml PDGF ; culture resulted in 21.3, 51.2, 41.4 and 45.9%(p<0.05), respectively, developing into morulae and blastocysts. In Experiment 4, 0 and Sng /ml PDGF added to CR$_1$aa coculture with BRL or BOEC yielded 47.5, 42.5, 33.8 and 41.6% morulae and blastocysts, respectively. In Experiment 5, the proportion of embryos into morulae and blastocysts was highest in CR$_1$aa with MEF coculture group(50.9%) compared to any other group(CR$_1$aa, 22.3%; CR$_1$aa+BRL, 32.9%; CR$_1$aa+BOEC, 33.8%, p>0.05). In Experiment 6, survival rate of blastocysts produced by in vitro fertilization when cryoprotectant was removed in 0.7M glycerol+0.7M sucrose and 0.7M sucrose solution for 10 min. after thawing at 2$0^{\circ}C$ (Exp. H, 58.8%) was slightly higher than when cryoprotectant was removed 10%, 6.7% and 3.3% glycerol for 10 min. after thawing at 37$^{\circ}C$ (Exp. I, 54.3%). These study indicate that growth factors and somatic cell co-culture can increase the proportion of embryos that develop into morulae and blastocysts without an increase in the cell number and frozen /thawed method employed this experiment was not different.