• Journal of Welding and Joining
• /
• 제24권5호
• /
• pp.49-56
• /
• 2006

For laser welding in shipbuilding industry, gap bridging capability is one of the most important characteristics to achieve the high productivity and good weld quality. Recently, laser-GMA hybrid welding process is regarded as a distinctive method to overcome the tight gap tolerance with improving the productivity. In this study, the influence of process parameters on the bead formation was experimentally analyzed and the relationship between the process parameters and geometric imperfections was investigated. It was revealed that undercut, excessive weld metal, excessive penetration and incompletely filled groove were the major geometric imperfections. The optimized wire feeding and arc pressure were necessary to ensure the gap bridging ability. The approach to select the process parameters was conducted for butt welding with up to 2mm joint gap, in which the sound weld beads were generated without changing the welding speed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권7호
• /
• pp.2488-2511
• /
• 2015

Data redundancy has high impact on Wireless Sensor Network's (WSN) performance and reliability. Spatial and temporal similarity is an inherent property of sensory data. By reducing this spatio-temporal data redundancy, substantial amount of nodal energy and bandwidth can be conserved. Most of the data gathering approaches use either temporal correlation or spatial correlation to minimize data redundancy. In Collective Prediction exploiting Spatio Temporal correlation (CoPeST), we exploit both the spatial and temporal correlation between sensory data. In the proposed work, the spatial redundancy of sensor data is reduced by similarity based sub clustering, where closely correlated sensor nodes are represented by a single representative node. The temporal redundancy is reduced by model based prediction approach, where only a subset of sensor data is transmitted and the rest is predicted. The proposed work reduces substantial amount of energy expensive communication, while maintaining the data within user define error threshold. Being a distributed approach, the proposed work is highly scalable. The work achieves up to 65% data reduction in a periodical data gathering system with an error tolerance of 0.6℃ on collected data.

• Journal of Microbiology and Biotechnology
• /
• 제9권1호
• /
• pp.84-90
• /
• 1999

The growth of Bifidobacterium breve strain HP2 was completely inhibited by the addition of lactate higher than 4.0％ but not by the addition of acetate. Two kinds of lactate-tolerant mutants were isolated by the nitrosoguanidine treatment, enrichment on a liquid medium with 5％ lactate, and selection on agar plates with 5％ lactate. The mutants were not only able to grow in the presence of 5％ lactate but also improved in viable cell stability in the acidic pH range. In a pH-controlled fermentor, mutant N-1-5 grew at a rate slower than that of the wild type but its growth yield was higher. Notably, mutants were more halotolerant and more osmotolerant than the wild type and they were able to grow in the presence of 3％ NaCl or 25％ lactose at which the wild type entirely stopped the growth. The enzyme activities involved in the lactose metabolism in B. breve were measured to elucidate the biochemical basis for lactate tolerance. In the mutants, activities of several enzymes including phosphoglucomutase decreased compared to the wild-type, which may explain their lower growth rate. However, the activity of lactate dehydrogenase or its nature of inhibition by lactate was not altered.

• Journal of Microbiology and Biotechnology
• /
• 제30권7호
• /
• pp.1082-1091
• /
• 2020

Microbial transglutaminases (MTGs) are widely used in the food industry. In this study, the MTG gene of Streptomyces sp. TYQ1024 was cloned and expressed in a food-grade bacterial strain, Bacillus subtilis SCK6. Extracellular activity of the MTG after codon and signal peptide (SP Ync M) optimization was 20 times that of the pre-optimized enzyme. After purification, the molecular weight of the MTG was 38 kDa and the specific activity was 63.75 U/mg. The optimal temperature and pH for the recombinant MTG activity were 50℃ and 8.0, respectively. MTG activity increased 1.42-fold in the presence of β-ME and 1.6-fold in the presence of DTT. Moreover, 18% sodium chloride still resulted in 83% enzyme activity, which showed good salt tolerance. Cross-linking gelatin with the MTG increased the strength of gelatin 1.67 times and increased the thermal denaturation temperature from 61.8 to 75.8℃. The MTG also significantly increased the strength and thermal stability of gelatin. These characteristics demonstrated the huge commercial potential of MTG, such as for applications in salted protein foods.

• Journal of Microbiology and Biotechnology
• /
• 제12권1호
• /
• pp.162-165
• /
• 2002

With the objective of identifying the commercial potential of new direct-fed microbials, several temperature-tolerant strains were isolated from cane molasses at $39^{\circ}C$ and tested for their tolerance to pH, bile salts, and a mixture of volatile fatty acids (acetic acid:propionic acid:butyric acid=6.5:2.0:1.5). It was found that the isolated strain DY 252 grew very well up to pH 2.0 and was resistant to relatively high concentrations of bile salts. Among the strains tested, DY 252 was least inhibited by the addition of volatile fatty acids to the growth medium at $39^{\circ}C$. Accordingly, it would appear that strain DY 252, identified as yeast Issatchenkia orientalis, may be a potential candidate for use as a microbial feed additive.

• 대한기계학회논문집A
• /
• 제26권9호
• /
• pp.1736-1745
• /
• 2002

The objective of this study is to predict the roll wear in hot rod rolling process. In this study hot rod rolling process for round and oval passes has been investigated. In order to predict the roll wear, the wear model is reformulated as an incremental form and then wear depth of roll is calculated at each deformation step on contact area using the results of finite element analysis, such as relative sliding velocity and normal pressure at contact area. Archard's wear model was applied to predict the roll wear. To know the thermal softening of DCI (Ductile Cast Iron) roll according to operating conditions, high temperature micro hardness test is executed and a new wear model has been proposed by considering the thermal softening of DCI roll expressed in terms of the main tempering parameter curve. 3D wear program developed in this study might be used for adjusting the gap of rolls to set up a suitable rolling schedule for keeping dimensional tolerance of the product.

• 천문학회보
• /
• 제35권2호
• /
• pp.62.2-62.2
• /
• 2010

The CQUEAN (Camera for QUasars in EArly uNiverse) is an optical CCD camera optimized for the observation of high redshift QSOs to understand the nature of early universe. The focal reducer, which is composed of four spherical lens, is allowed to secure a wider field of view for CQUEAN, by reducing the focal length of the system by one third. We designed the lens configuration, the lens barrel, and the adapters to assemble to attach focal reducer to the CCD camera system. We performed tolerance analysis using ZEMAX. The manufacturing of the focal reducer system and its lab test of optical performance were already finished. It turned out that the performance can meet the original requirement, with the aberration and alignment error taken into account. We successfully attached the focal reducer and CQUEAN to the cassegrain focus of 2.1m telescope at McDonald Observatory, USA, and several tests of CQUEAN system were carried out. In this presentation, I will show the process of focal reducer fabrication and the result of performance test.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.331-334
• /
• 2006

This paper deals with the ways how the AUV is composed of sub-modules to be fault-tolerant during the mission. The emergency situations can be classified into several parts according to the zones where the situations take place - sensor zone, actuator zone, interpreter zone, and communication zone. This paper explains how each element of emergency situation is detected, contained and treated, and as a result, introduce the modular structured AUV controller for the autonomous cruising.

• 한국지역사회생활과학회지
• /
• 제14권3호
• /
• pp.67-73
• /
• 2003

This study was carried out to investigate the supplementary effects of the rice germ oil compared with soy bean oil on blood glucose level of non-insulin dependent diabetic mice. Forty diabetic KK mice were fed two kinds of experimental diets with 20% lipid from soy bean oil as a control(CO) and rice germ oil(RG) for 8 weeks, respectively. Diet intake, body weight, organs weights and lipids levels of serum, liver and feces were measured. There was no significant difference in food and water intake, body weight gain and organs weights between experimental groups. The concentrations of fasting and random blood glucose were similar between CO and RG groups. There was no significant difference in blood glucose levels after glucose treatment during the glucose tolerance test between two groups. The levels of $HbA_{1c}$ as the index of blood glucose status, and insulin were similar in two groups. These results suggested that rice germ oil can't reduce blood glucose concentration of non-insulin dependent diabetic mice compared with soybean oil. But we need to investigate the hypoglycemic effect of rice germ oil by changing supplementary level and period.

• 대한조선학회논문집
• /
• 제56권5호
• /
• pp.389-395
• /
• 2019

Turret mooring type Floating Production Storage and Offloading (FPSO) is designed to rotate the hull around a turret system. The system is mounted inside a cylindrical moon-pool structure of the ship hull structure. The upper part of the moon-pool structure called Bogie Support Structure (BSS) is supported on ring type rail structure (bogie), so high roundness is required at the top of the structure. In this study, the deformation measured during BSS installation was compared with the predicted values through the thermal elasto-plastic analysis, and the causes of deformation were analyzed. Deformation behavior of cylindrical structure with a very large diameter compared to the thickness was investigated. In addition, a proper welding sequence and correction method for the deformed structure were proposed. This study can be an example of the solution to the tolerance problem of large cylindrical structures.