• Journal of the Korean Ceramic Society
• /
• v.40 no.2
• /
• pp.146-152
• /
• 2003

The waste ferrites from magnetic core manufacturing process were used to $CO_2$gas decomposition to avoid the greenhouse effects. The waste ferrites are the mixed powder of Ni-Zn and Mn-Zn ferrites core. In the reduction of ferrites by 5% $H_2/Ar$ mixed gas, the weight loss of ferrites was about 14~16wt%. After the$CO_2$gas decomposition reaction, the weight of the reduced ferrites was increased up to 11wt%.$CO_2$gas was decomposed by oxidation of Fe and FeO in reduced compound and the phase of the waste ferrite was changed to spinel structure. A new technique capable of$CO_2$decomposition as low cost process through utilizing waste ferrite was development.

• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.137-142
• /
• 1999

지구 온난화 현상의 주된 원인인 CO2 가스의 분해를 위해, 스트론튬 페라이트를 이용한 CO2 가스 분해 반응에 대해 연구하였다. CO2 가스 분해를 위한 반응 매체로 스피넬형 조성과 마그네토프롬바이트형 조성의 스트론튬 페라이트 미세분말을 공침법으로 제조한 후, H2 가스로 환원시켜 산소부족형 스트론튬 페라이트 분말을 제조하였다. 이 산소부족형 스트론튬 페라이트 분말은 CO2 가스를 환원, 분해시키면서 산화된다. 이러한 원리를 이용한 CO2 분해 반응에서 스피넬형 조성 스트론튬 페라이트 분말이 마그네토프롬바이트형 조성 분말 보다 빠르게 많은 양의 CO2 가스를 분해 시켰다. 페라이트 중의 스트론튬이 산화·환원 반응을 촉진시키는 것을 관찰할 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.40 no.2
• /
• pp.191-197
• /
• 2003

Sr ferrites with various compositions were applied to the decomposition of $CO_2$ to mitigate the greenhouse effect. In the reduction reaction of Sr ferrites up to 80$0^{\circ}C$, starting temperature was lower with increasing of Sr content in Sr ferrite. However, the reactivity was higher with decreasing Sr content. In the $CO_2$ decomposition reaction with reduced Sr ferrites, the amount of CO and C were depended on the ratio of Sr and Fe in Sr ferrite. With increasing Sr content. larger amount of C were deposited on the surface of ferrite. Therefore, in order to apply Sr ferrites for the decomposition of $CO_2$, it is necessary to control the ratio of Sr and Fe according to the conditions used.

• Journal of the Korean Ceramic Society
• /
• v.37 no.10
• /
• pp.962-967
• /
• 2000

산소 결핍 페라이트 (oxygen deficient ferrites, ODF) MF $e_2$ $O_{4-}$$\delta$/는 약 30$0^{\circ}C$의 낮은 온도에서 온실가스중 하나인 $CO_2$를 C와 $O_2$로 분해시킨다. 본 연구에서는 $CO_2$분해 촉매로서 3원계 초미세 페라이트 N $i_{x}$Z $n_{1-x}$F $e_2$ $O_4$와 N $i_{x}$ $Co_{1-x}$F $e_2$ $O_4$를 수열합성법과 공침법 등의 습식 합성법으로 각각 합성하여 이들 분말의 특성과 $CO_2$분해 특성을 고찰하였다. 페라이트의 XRD 결과, 결정구조는 모두 전형적인 스피넬 구조로 동일하게 나타났다. BET 비표면적은 수열합성법으로 제조한 3원계 페라이트의 경우 110$m^2$/g 이상으로 공침법으로 제조한 페라이트보다 비교적 큰 값을 나타냈고 분말 입자크기 또한 약 10nm의 매우 미세한 분말을 얻을 수 있었다. 3원계 산소 결핍 페라이트의 $CO_2$분해 효율은 공침법으로 합성한 것보다 수열합성법으로 합성한 것이 더 우수하게 나타났으며, N $i_{x}$ $Co_{1-x}$F $e_2$ $O_{4-}$$\delta$/보다 N $i_{x}$Z $n_{1-x}$F $e_2$ $O_{4-}$$\delta$/가 우수한 것으로 나타났다.

• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.657-662
• /
• 2002

The reduced ferrites, reduced NiF $e_2$ $O_4$ and CuF $e_2$ $O_4$, by C $H_4$ were applied to $CO_2$ decomposition to avoid the greenhouse effects. At the reduction reaction above $700^{\circ}C$, $H_2$ and CO were generated by partial oxidation of C $H_4$ After the reduction reaction up to 80$0^{\circ}C$, the spinel structure ferrites changed to mixture of the oxygen deficient iron oxide (Fe $O_{(1-{\delta})}$(0$\leq$$\delta$$\leq$1)) and the metallic Ni or Cu. The rate and quantity of $CO_2$ decomposition with reduced CuF $e_2$ $O_4$ were larger than those with reduced NiFe $O_4$. The $CO_2$ gas was decomposed by oxidation of the oxygen deficient iron oxide. The metallic Cu and Ni were not oxidized and remained in a metallic state up to 80$0^{\circ}C$. The $CO_2$ decomposition reaction with the reduced ferrite by C $H_4$ gas is excellent process preparing useful gas such as $H_2$and CO and decomposing $CO_2$ gas.

• Journal of the Korean Magnetics Society
• /
• v.13 no.1
• /
• pp.1-5
• /
• 2003

Magnetic and structural properties of $(CoFe_2O_4)_{1-x}(Y_3Fe_5O_{12})_x$ powders (0 $\leq$ x $\leq$ 1) grown by a conventional ceramic method were investigated using X-ray diffractormeter (XRD), scanning electron microscopy (SEM), Mossbauer spectroscopy and vibrating sample magnetometer (VSM). The XRD results for the powders annealed at 120$0^{\circ}C$ indicated that no other peak was observed except for the ones from cobalt ferrite and the garnet powder. SEM micrographs indicated that cobalt ferrite and garnet powders were aggregated and completely formed together. It was hard to identify which part of the powders was the garnet or the cobalt ferrite. Mossbauer spectra for powders grown separately and mixed mechanically consisted of sub-spectra of cobalt ferrite and garnet, however, powders annealed together had an extra sub-spectrum, which was related with the interaction between iron ions at the grain surfaces of cobalt ferrite and the garnet: cobalt ferrite and garnet particles were located very closely. The value of the saturation magnetization measured by a VSM as a function of composition ratio agreed very well with the ones based on the theoretical calculation.

• Journal of the Korean Magnetics Society
• /
• v.19 no.6
• /
• pp.203-208
• /
• 2009

Magnetic and Ka-band absorbing properties have been investigated in Ti-Co substituted M-type barium hexaferrites with $BaTi_{0.5}Co_{0.5}Fe_{11}O_{19}$ composition. The ferrite powders were prepared by conventional ceramic processing technique and used as absorbent fillers in ferrite-rubber composites. The magnetic properties were measured by vibrating sample magnetometer. The complex permeability and dielectric constant were measured by using the WR-28 rectangular waveguide and network analyzer in the frequency range 26.5~40 GHz. For the Ti-Co substituted M-hexaferrites, the ferromagnetic resonance is observed at Ka-band (29.4 GHz). The matching frequency and matching thickness are determined by using the solution map of impedance matching. A wide band microwave absorbance is predicted with controlled ferrite volume fraction and absorber thickness.

• Journal of the Korean Magnetics Society
• /
• v.5 no.1
• /
• pp.15-20
• /
• 1995

We have prepared 20 kinds of Mn-Zn ferrites as content of CaO(0.1 mol%), NiO(0.0~0.60 mol%) and CoO(0.0~0.8 mol%) adding by the coprecipitation method and studied the magnetic properties as content of CaO, NiO and CoO adding. Initial permeability decrease as the content of NiO and CoO adding increases, while Curie tem~ perature increase as the content of NiO and CoO adding increases. $(H_{c})$, $(B_{s})$ and $(W_{h})$ increase as content of NiO adding increases.

• Resources Recycling
• /
• v.11 no.5
• /
• pp.16-20
• /
• 2002

This experiment was carried out to examine the effects of La-Co substitution on Sr-ferrite. The magnetic properties of calcined and sintered materials varied with the substitutional amount of La and Co elements in Sr-ferrite. Anisotropy field and coercivity for Sr ferrite were increased with raising La-Co substitution amounts. The microstructure observation for Sr ferrite substituted by La-Co revealed that La-Co inhabited grain growth during calcination and promoted lateral grain growth during sintering. The relationship between $B_{r}$ and $_{i}$ /$H_{c}$ for La-Co substituted Sr-ferrite was found to be $B_{r}$$≒0.097_{i}$ /$H_{c}$/+4500. In case of $SrFe_{12}$ $O_{19}$, $B_{r} was 4090 G and $_{ i}$$H_{c}$ was 3560 Oe, but $B_{r}$ was 4080 G and and $_{i}$ $H_{c}$ was 4800 Oe for $Sr_{0.7}$ $La_{0.3}$ $Fe_{11.7}$ /$Co_{0.3}$ $O_{19}$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.5
• /
• pp.197-202
• /
• 2021

Synthesis of Z-type hexaferrite Ba₃Co₂Fe₂₄O₄₁ (Ba₃Z) and Ba_1.5La_1.5Co₂Fe₂₄O₄₁ (Ba_1.5La_1.5Z) powders were tried using molten salt synthesis after primary calcination. Ba₃Z calcined at 1000℃ was formed with both M-type and Y-type hexaferrite, and then Z-type was obtained when sintered with molten salt at 1150℃ and 1200℃. In the case of Ba_1.5La_1.5Z calcined at 1000℃, however, M-type hexaferrite, CoFe₂O₄ (Spinel phase), and LaFeO₃ were synthesized. As a result, Z-type hexaferrite was not synthesized after sintering with molten salt. In addition, the aspect ratio of the particles decreased as the sintering temperature increased with molten salt synthesis. To obtain a single-phase Ba_1.5La_1.5Z with a high aspect ratio, it is expected the raw materials have to calcine below the temperature of a spinel phase formation before sintering with molten salt.