• Korean Journal of Agricultural Science
• /
• v.25 no.1
• /
• pp.124-130
• /
• 1998

An alkalophilic bacterium, the strain AC-711 as a potent producer of alkaline cellulase, was selected among many isolates from soil environments. Morphological, physiological and chemical characteristics of the strain AC-711 suggested that it belongs to the genus Pseudomonas according to the Bergey's Manual of Systematic Bacteriology, however the G+C mol% (54.43) of its chromosomal DNA is lower than the normal values of the genus. The major cell wall fatty acids were determined as 15:0 and 17:0 anteiso. The production of alkaline CMCase by the strain was maximal when grown on the mediun containing 1% carboxymethyl cellulose, 0.1% $KH_2PO_4$, 0.02% $CoCl_2$, 0.02% Tween 80, 0.5% $Na_2CO_3$, 0.8% yeast extract, pH 10.3 at $30^{\circ}C$ for 3 days, and the most of enzyme was excreted into culture mediun.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.6
• /
• pp.770-777
• /
• 2015

Recently, due to the rapid development of Power Electronics, the usage of Non Linear Load variable frequency drivers (VFDs) is increasing in the electric propulsion vessels and offshore plants. And harmonics which is generated by the variable frequency drives is an important issue should be solved. Ac line reactors and dc link reactors are widely used in variable frequency drives to improve the drive performance such as reducing input current harmonics, elevating input power factor, and protecting the drives from surges, etc. The effectiveness of both types of reactors in reducing input harmonics is affected by the loading of the drives and the system source impedance. And it considered that inductance of DC link reactors should be about 1.7 times of AC line reactors for same effect. The rules to evaluate the needs and effectiveness using ac line or dc link reactors are proposed for practical appications. In this paper, a simulation is performed to investigate of such factors using software PSIM.

• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.157-163
• /
• 2012

Internet Data Centers (IDCs), which are essential facilities in the modern IT industry, typically have scores of MW of concentrated electric loads. The provision of an Uninterruptible Power Supply (UPS) is necessary for the power feed system of IDCs owing to the need for stable power. Thus, conventional IDC AC power feed systems have three cascaded power conversion stages, (AC-DC), (DC-AC), and (AC-DC), resulting in a very low conversion efficiency. In comparison, DC power feed systems require only a single power conversion stage (AC-DC) to supply AC main power to DC server loads, resulting in comparatively high conversion efficiency and reliability [4-11]. This paper compares the efficiencies of a 220V AC power feed system with those of a 300V DC power feed system under equal load conditions, as established by the Mok-Dong IDC of Korea Telecom Co. Ltd. (KT). Experimental results show that the total operation efficiency of the 300V DC power feed system is approximately 15% higher than that of the 220V AC power feed system.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.361-365
• /
• 2002

Advancements in silicon phase control (SCR) technologies provide an arc welding power supply that has the capability to allow the alteration of the Alternating Current (AC) welding output. These technologies provide a square wave output involving sixteen frequency selections and multiple balance selections. While an AC out put is known to minimize magnetic disturbances associate with Direct Current (DC), the potentials of a non-sinusoidal waveform have not been explored. The focus of the paper is to determine the effects that the frequency and balance of an AC wave form output will have upon a high speed Submerge Arc (SAW) application. The test matrix of the project includes welding .250" steel plate. Joint type is square groove with a travel speed of 65 IPM. Each of the weld parameters was held constant, only the frequency and/or balance were altered between welds. Each frequency/balance combination involved three-gap spacing. Upon completion of the welds the bead profiles were measured and recorded. A relationships/trends were observed with various frequency and balance values. Optimum frequency and balance values were found for the .250" square groove application which permit consistent weld sizing, ease of slag removal, and minimal plate distortion.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1585-1587
• /
• 2001

ac PDP 동작에 있어 미량 불순물 가스는 panel 내의 휘도 및 방전 특성에 많은 영향을 미칠것으로 생각된다. $O_2$, O, C 및 $H_2$와 같은 불순물 가스는 ac PDP의 제조 공정 중에 발생하거나, 충전된 방전가스에 혼합되어 발생하는 등 여러 가지 원인으로 나타난다. 이 논문에서는, ac PDP의 동작 가스 중에 미량의 불순물 가스(Ar, $N_2$, $O_2$, $H_2$, $CO_2$)를 주입하여, 이 미량의 불순물 가스로 인한 ac PDP의 휘도 및 방전의 특성변화에 대한 관계를 조사하였다. 그 결과, $O_2$ 가스의 분압이 $2{\times}10^{-3}$/He+Ne+Xe(4%)일 경우, 방전전압은 12% 증가하였고, 휘도는 60% 감소하였다. 또한, $CO_2$ 가스의 경우는 방전전압은 14% 증가하였고, 휘도는 44% 감소하였다.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.541-542
• /
• 2011

최근 산업현장에서 작업의 정밀도에 대한 요구가 높아지면서 산업용 로봇의 정밀위치제어에 대한 연구가 활발히 이루어지고 있다. 특히 정밀 위치제어가 요구되는 산업용 로봇에서 외란은 로봇의 성능에 영향을 미치는 중요한 요소 중의 하나이다. 본 논문에서는 다관절 로봇에 사용되는 AC서보 모터의 고강성 정밀 위치제어를 위해 외란 변화에 대한 강인한 제어를 할 수 있는 외란 관측기와 파라메터 변동에 따른 보상 알고리즘을 제안하였다. 제안된 알고리즘은 시뮬레이션과 실험을 통해 외란 변화에 대해 정밀한 위치제어가 가능함을 보였다. 또한, 다관절 로봇의 각 축에 적용되고 있는 AC서보 모터의 PID 제어기와 제안된 알고리즘과의 비교를 통해 부하 변동에 따른 두 제어기의 차이점을 보였다.

• Journal of the Korean Society of Combustion
• /
• v.8 no.1
• /
• pp.9-16
• /
• 2003

Carbon soot emission from combustion processes, especially from diesel engines, is a subject of growing concern since soot is known to seriously affect human health. Efforts have been made to oxidize soot particles utilizing Non-Thermal Plasma(NTP) techniques. When oxygen is carried into a plasma device, electrons generated by the plasma dissociate the oxygen, resulting in the formation of oxygen atoms. These highly activated atoms, called O radicals, are known as strong oxidizing agent. This paper presents concentration variations of CO and $CO_2$ at the exit of the plasma device, resulting from the soot oxidation by O radicals, with variations of inlet oxygen concentration, gas temperature, and gas flow rate. Based on the data, Arrehenious rate constants of reactions between C(s)+O and C(s)+O+O were proposed.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.544-546
• /
• 2000

This paper presents a monitoring technique of pole transformers using AC bridge circuit. And to detect the capacitance in oil more effectively, this paper used AC bridge circuit. The sensor in oil which could be placed inside of the distribution transformer can measures the changes of capacitance in oil. And with the sensing of the upper part's capacitance, it is possible to determine the changes of the oil height. Establishment of the proposed system helps to build the confidence in monitoring of the pole transformers.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.10
• /
• pp.909-913
• /
• 2002

The luminance and discharge characteristics of ac PDP may be significantly affected by a small amount of impurity gas in working gas. These impurity gases such as O$_2$, O, C and H$_2$ can be mixed in the manufacturing and /or discharge process. In this paper a small amount of impurity gas in acPDP are introduced quantitatively and the relationship between the amount of impurity gas and the luminance/discharge characteristics are investigated. The luminous efficiency decreased seriously with increase in the partial pressure of impurity gases, especially in H$_2$, O$_2$ and CO$_2$. Under the condition of the impurity gas ratio of 2${\times}$10$\^$-3/ for Ar, N2, H$_2$, CO$_2$ and O$_2$, the luminous efficiency decreased about 8%, 8%, 32%, 36% and 50%, respectively.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.272-273
• /
• 2015

This paper analyze scenario of feeder wire fault that occurs in the AC feeding system considering train position. The fault location of AC feeding system is calculated by measuring impedance. However, in this way, estimation error can be occurred because of tie connection, boosting current, etc. Therefore, it's hard to find fault location, so that it is required to detailed circuit analysis according to fault location. We analyze the short circuit impedance values with respect to feeder wire fault according to a train position. In this paper, PSCAD is used for modeling and analysis of AC railway feeding system.