• 대한화학회지
• /
• 제51권4호
• /
• pp.331-338
• /
• 2007

분석 시약으로 2-hydroxy-3-methoxy benzaldehyde thiosemicarbazone (HMBATSC)를 사용하여 코발트 (II) 정량을 위하여 빠르고 간단하고 민감한 분광광도법을 개발하였다. 액상에서 금속이온이 pH 6.0에서 HMBATSC와 갈색의 착물을 형성하였다. 이 착물은 375 nm와 390 nm에서 두 개의 최대 흡수 피크를 보였다. 375 nm에서 많은 흡 수를 보였고, 반면 390 nm에서는 분명한 흡수를 보이지 않았다. Beer's 법칙에서 Co(II)는 0.059-2.357 μg ml-1 범위를 보였다. 이 방법의 몰 흡수와 Sandall's 민감도는 각각 2.74×104 l mol-1 cm-1와 0.0024 μg cm-2 였다. 여러 가지 다른 이온들에 간섭에 대해서도 연구하였다. 화학양론적으로 착체는 1:2 [Co(II)- HMBATSC] 이 였다. 이차 유도 분광광도 법에 의한 Co(II)의 정량방법에 대해서도 제안하였다. 제안된 방법을 alloy steels, 비타민 B12와 생물학 시료에 있는 Co(II)의 정량에 적용하였다.

• 분석과학
• /
• 제28권4호
• /
• pp.255-259
• /
• 2015

A technique on the determination of Co(II) in aqueous samples with quinalizarin-β-cyclodextrin inclusion complex was developed. The conditions such as pH of the sample solution, the concentration of quinalizarin and the concentration of β-CD were optimized to 11.3(±0.2), 1.2×10⁻⁶ M and 8.0×10⁻⁶ M, respectively. Under these optimum conditions, the calibration curve of Co(II) was obtained over concentration range of 5.0×10⁻⁹ ~ 1.2×10⁻⁷ M. The detection limit was 4.2×10⁻⁹ M (0.25 ng/mL). For validating this proposed technique, aqueous samples(stream water, reservoir water and tap water) were used. Recovery yields of 95~105% were obtained. The relative standard deviation(%) in aqueous samples were less than 7.0%. Based on experimental results, it is proposed that this technique can be applied to the practical determination of Co(II).

• 분석과학
• /
• 제17권6호
• /
• pp.532-535
• /
• 2004

A method on the determination of Co(II) after adsorbing of Co(II) on 2-mercaptobenzothiazole-loaded silica gel was studied. The conditions on the separation of Co(II) such as pH of solution, the amount of 2-mercaptobenzothiazole, the flow rate for adsorption, and the desorption solvent were optimized to 9.0, 0.05 g, $10mL\;min^{-1}$ and 1 M $HNO_3$ in ethanol, respectively. Under these optimum conditions, the calibration curve of Co(II) was obtained over concentration range of $2{\sim}120ng\;mL^{-1}$. The detection limit was $0.6ng\;mL^{-1}$. Recovery yields of Co(II) in various natural water samples were more than 90%.

• Bulletin of the Korean Chemical Society
• /
• 제27권11호
• /
• pp.1757-1762
• /
• 2006

A solvent sublation using salphen as a ligand was studied and applied for the determination of trace Ni(II), Co(II) and Cu(II) in water samples. The fundamental study was investigated by a solvent extraction process because the solvent sublation was done by extracting the floated analytes into an organic solvent from the aqueous solution. The salphen complexes of Ni(II), Co(II) and Cu(II) ions were formed in an alkaline solution of more than pH 8 and then they were extracted into m-xylene. It was known that the each metallic ion formed 1 : 1 complex with the salphen and the logarithmic values of extraction constants for the complexes were 3.3 5.1 as an average value. Based on the preliminary study, the procedure was fixed for the separation and concentration of the analytes in samples. Various conditions such as the pH of solutions, the influence of $NaClO_4$, the bubbling rate and time of $N_2$ gas, and the type of organic solvent were optimized. The metal-salphen complexes could be extracted into m-xylene from the solution of more than pH 8, but the pH could be shifted to acidic solution of pH 6 by the addition of $NaClO_4$. In addition, the solvent sublation efficiency of the analytes was increased by adding $NaClO_4$. The recovery of 97-115% was obtained in the spiked samples in which given amounts of 0.3 mg/L Ni(II), 0.8 mg/L Co(II) and 0.04 mg/L Cu(II) were added.

• 대한화학회지
• /
• 제47권6호
• /
• pp.547-552
• /
• 2003

코발트와 니켈 이온을 4-(2-피리딜아조)레조루신올(PAR) 리간드와 킬레이트를 만들고 이 금속-PAR 킬레이트들을 역상 모세관 고성능 액체 크로마토그래피(RP-CpHPLC)로 분리와 정량을 하였다. 컬럼은 주로 Vydac C4 모세관 컬럼을, 이동상은 아세토니트릴(MeCN) 수용액을 사용하였다. 머무름 인자, k와 봉우리 높이에 대한 이동상의 pH와 MeCN 농도의 영향을 검토하여 분리와 정량의 최적 조건을 얻었다. 결과, 분리의 최적 이동상은 22.5% MeCN, pH 5.6이었고, Co(II) 이온의 정량은 이 조건에서 할 수 있었다. 그러나 Ni(II) 이온의 정량은 분리와 봉우리의 높이로부타 22.5% MeCN, pH 7.20이 보다 적합함을 확인하였다. 각각의 조건에서 Co(II)와 Ni(II) 이온의 검출한계(D.L., S/N=3)는 각각 $2.0{\times}10{-7}$ M(14.9 ppb)와 $1.0{\times}10{-6}$ M(59.2 ppb)였다.

• Bulletin of the Korean Chemical Society
• /
• 제24권12호
• /
• pp.1781-1784
• /
• 2003

Determination of Co(II) ion as a 4-(2-thiazolylazo)resorcinol(TAR) or 5-methyl-4-(2-thiazolylazo)resorcinol(5MTAR) chelate was accomplished by reversed-phase capillary high-performance liquid chromatography (RP-Capillary-HPLC) using a Vydac $C_4$ column and MeCN-water mixture as mobile phase. The effect of change in pH and MeCN percentage of the mobile phase on the retention factor, k and peak intensity were evaluated. It was found that 30% MeCN (v/v) of pH 5.60 or 7.20 was adequate as mobile phase when TAR or 5MTAR is used. Detection limit (D.L., S/N=3) in each case was $2.0\;{\times}\;10^{-7}$M (11.8 ppb) and $3.0\;{\times}\;10^{-7}$ M (17.7 ppb). The Co(II) ion in mineral and waste water was determined with the optimum column and mobile phase.

• Bulletin of the Korean Chemical Society
• /
• 제27권11호
• /
• pp.1832-1838
• /
• 2006

The present paper is focused on sorption concentration of silver (I) on some complex-forming ion exchangers in the initial thiocyanate form and subsequent determination of Ag(I) in the phase of anion exchanger AN-25 by diffuse reflectance spectroscopy. The sorption and kinetic characteristics of the sorbents were investigated. The apparent stability constants of thiocyanate silver complexes in the ion exchanger phase were calculated. The sorption-spectroscopic method is proposed for Ag(I) determination in aqueous solutions. The calibration curve is linear in the concentration range of 10-200 mg/L (sample volume is 10.0 mL) and the detection limit is 2 $\mu$g/mL. The presence of $Na^+,\;K^+,\;Mg^{2+}$ (macrocomponents) as well as of Ni (II), Co (II), Cu (II) do not hinder the determination of silver (I).

• Bulletin of the Korean Chemical Society
• /
• 제29권1호
• /
• pp.99-103
• /
• 2008

Solvent extraction using salphen as a ligand has been investigated for the selective separation and determination of trace Fe(II) and Fe(III). A salphen ligand was synthesized, and solvent extraction variables, such as solution pH, the concentration of salphen, the type of organic solvent, auxiliary agents, oxidants and the effect of interference were optimized. Salphen is stable at pH 3-4, and Fe(III)-salphen complexes can be selectively extracted into an MIBK(4-methyl-2-pentanone) phase from an aqueous solution within this pH range. For the determination of the total amount of iron in 100 mL of aqueous solution, Fe(II) ions were completely oxidized using 0.05 mL of 3.5% H2O2 without side reactions. To evaluate its applicability, the proposed method was applied to determine trace Fe(II) and Fe(III) in several kinds of water samples. Reproducible results were obtained with RSD of less than 3.0%, and the recoveries for this reliability were obtained with 91-112%.

• 한국환경보건학회지
• /
• 제21권3호
• /
• pp.87-95
• /
• 1995

A rapid and selective co-extraction systems of copper and zinc-thiocyanate complex into various types of alkylamine for the simultaneous determination of two metal ions by atomic absorption spectrometry and ion chromatograph have been proposed. The quantitative extractions of Cu(II) and Zn(II) at 0.1 M-thiocyanate and 0.1 M-HCI were achieved with Aliquat 336-$CHCl_3$. The detection limits of Cu and Zn were 2 ppb and 0.9 ppb respectively.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1516-1520
• /
• 2009

A sensitive technique for the determination of trace Co(II) in various samples after column preconcentration by adsorbing onto silica gel loaded with 1-nitroso-2-naphthol was developed. Several experimental conditions, such as pH of sample solution, the amount of silica gel loaded with 1-nitroso-2-naphthol, the flow rate for adsorption and so forth, were optimized. The interfering effects of diverse concomitant ions were investigated. Fe(III) interfered with more than any other ions, but the interference by Fe(III) was completely eliminated by adjusting the amount of silica gel loaded with 1-nitroso-2-naphthol to 0.30 g. The dynamic range, the correlation coefficient ($R^2$), and the detection limit obtained by the proposed technique were 3.0-140.0 ng m$L^{-1}$, 0.9942, and 1.81 ng m$L^{-1}$, respectively. For validating the technique, the aqueous samples (tap water, reservoir water, stream water, and wastewater) and the plastic samples were used as real samples. Recovery yields of 93.0-107.0% were obtained. These measured data were not different from ICP-MS data at the 95% confidence level by F test. Based on the results of the experiment, it has been found that the proposed technique can be applied to the determination of Co(II) in various real samples.