• Resources Recycling
• /
• v.3 no.2
• /
• pp.9-16
• /
• 1994

In this study, the grinding and wet cyclone process of the dust for the effective separation of high purity iron powder and iron oxide were investigated. The results obtained in this study can be summarized as follows: 1. By applying the wet cyclone technique for the iron powder(+200 mesh) produced from EC dust of the Kwangyang 2nd steel making factory, the iron powder of high content more than 99.76% of Fe was obtained with 47.66% yield at grinding time of 5 minutes by attritor. 2. The particle size distribution of the iron powder recovered from converter dust is quite simillar with the iron powder of sweden Hoganas Co.(W40.24, W40.29, W40.37, W40.37OX). 3. By using iron powder, copper ions are all adsorbed and removed in any concentration ranges of copper sulfate solution(Cu:100, 200, 300, 600 ppm).

• Economic and Environmental Geology
• /
• v.51 no.5
• /
• pp.429-438
• /
• 2018

Since concrete is a hardened aggregates of various materials, it needs to be crushed for chemical analyses. However, the effect of sample crushing on the analytical results has not been precisely assessed till today. In this study, we prepared concrete test pieces using Portand cements and fly ashes as binding materials, and ponded ashes and sands as aggregates and analyzed the heavy metals of the test pieces using Standards for Fair Testing of Soil Contamination (SFTSC) and Wastes (SFTW). For this, each test piece was partially crushed at first and sieved for separation of grains of <0.15 mm, 0.15-0.5 mm, and 0.5-5 mm from the same crushed samples (Crushing Method I). Results of those samples using SFTSC showed a clear trend that analyzed heavy metal concentrations are higher in the finer fractions. Particularly, fractions with <0.15 mm indicated much higher concentrations than the theoretical ones, which were calculated based on the concentrations of individual materials and their mixing fractions. In contrast, the analytical results were generally comparable with the theoretical ones when the test pieces were totally pulverized such that all the crushed grains were <0.15 mm in size (Crushing Method II). These results are associated with the fact that cement materials and fly ashes, which are high in heavy metals relative to other materials, are enriched in the fine fractions. The analytical results using the SFTW derived very low concentrations in most of parameters and did not indicate the dependence of concentrations on the crushing methods due to using distilled water as leaching agent.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.35-40
• /
• 1999

The variations of the glass transition, melting peaks, molecular weight and its distribution (polydispersity index: PI) due to the annealing temperature and time have been investigated using the thermoplastic segmented polyurethanes (TPUs) and its blends based on the contents of hard segment. The position of the melting peak and its magnitude have been increased with the annealing temperature and time. This may be arised from the rearrangement of the microdomain structure due to the long-range or short-range segmental motion, the order-disorder transition of non-crystalline microphase, the variation of the domain size or the degree of disorder of crystalline structure by given different thermal histories. The annealing temperature and time affected the molecular weights and polydispersity : the number and weight average molecular weights were increased, while the polydispersity index (PI) deceased at certain temperatures : for TPU-35 at $135^{\circ}C$, for TPU-44 at $170^{\circ}C$ and for TPU-53 at $180^{\circ}C$. The temperatures which give the variations in molecular weights and in PIs are consistent with the annealing temperatures of which $T_3$ solely exists for each sample. Thus it is suggested that the chain dissosiation and recombination simultaneously occur at the above mentioned temperature for each sample.

• Agribusiness and Information Management
• /
• v.9 no.2
• /
• pp.1-11
• /
• 2017

Introduction: To analyze the impact of marketing losses on efficiency in transacting banana in Kurnool district of SRZ in Andhra Pradesh and to assess the opinions of the farmers on the constraints in transacting banana. Research back ground, Materials and Methods: The study relies exclusively on primary information obtained from the banana farmers of Kurnool District. Purposive sampling procedure was followed for the selection of the study area. Top two mandals in the district and top two villages in each mandal are selected in accordance with the area under cultivation of banana. Probability proportion to size was followed regarding the selection of sample farmers and accordingly 60 marginal, 37 small and 23 other farmers were selected and thereby, the total sample size was 120. Result and Discussion: Three marketing channels were identified in the marketing of banana in Kurnool district viz., Producer ${\rightarrow}$ Local-exporter ${\rightarrow}$ Wholesaler ${\rightarrow}$ Retailer ${\rightarrow}$ Consumer (Channel-I), Producer ${\rightarrow}$ Wholesaler ${\rightarrow}$ Cart-vendor ${\rightarrow}$ Consumer (Channel-II) and Producer ${\rightarrow}$ Juice-holder ${\rightarrow}$ Consumer (Channel-III). With the inclusion of marketing losses in the price spread analysis of banana in all the three channels, the marketing costs of all the intermediaries were increased and thereby, the farmer's share in consumer's rupee and Net Marketing Margins of the agencies are on the decline. So, without inclusion of marketing losses, the farmer's share in consumer's rupee and Net Marketing Margins of all the agencies are overvalued. The higher the marketing losses, the more is the negative impact on farmer's net selling price, net marketing margins of the intermediaries and marketing efficiency. The sample farmers are facing major problems in marketing of banana like frequent price fluctuations, unorganized marketing and lack of transportation facilities on priority basis. Suggestions: It is suggested to educate the farmers regarding the optimum maturity index for harvest, use of mechanical harvesters, proper placement of fruits during storage and ripening, better packaging and cushioning technologies to absorb shocks during transportation, strengthening of storage facilities and transport facilities, encourage co-operative marketing etc., to promote marketing efficiency of banana in the study area.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.4
• /
• pp.334-345
• /
• 2006

The objectives of this study were to analyze and compare 24 hrs personal exposure levels of MF at microenvironments such as home, school, educational institute, internet pc game room, transportation, and other places according to time activity patterns using various metrics for children attending the primary schools located near and away from the power lines, and to characterize the major microenvironments and impact factors attributed personal exposure level. The study was carried out for 44 children attending a primary school away from the lines(school A) and 125 children attending a school away from 154 kV power lines(school B), all who aged 12 years and were 6 grade, from July 2003 to December 2003. All participants filled in a questionnaire about characteristics, residence, use of electrical appliances and others. Children wore a small satchel in which EMDEX II and Lite (Enertech, Co. Ltd) and a diary of activity list for period of registration in 20 minutes blocks. All statistical calculations were made with the SAS System, Releas 6.12. The summary of results was presented below. First, about the characteristics of subjects, there no differences between two groups. The subject almost spent about 56 % of their time at home and about 20~25 % of their time at school. Fifty percent of children spent 2 hours at private educational institutes. Second, the personal exposure measurements of children in school B was statistically higher than those of children in school A by various metrics such as arithmetic mean, geometric mean, percentile(5, 25, 50, 75, 95), maximum, rate of change metric, constant field metric. The arithmetic and geometric mean magnetic fields during the time the children were at school B were 0.98 and $0.86{\mu}T$ and were about 23 times higher than those of children were at school A. In conclusion, the significant major determinants of personal exposure level is the distance from the power line to microenvironments.

• Journal of Plant Biotechnology
• /
• v.33 no.1
• /
• pp.27-32
• /
• 2006

To clarify the roles of bromelain in plants, we isolated BL1 gene encoding bromelain from pineapple stem tissues and sequenced. The full length cDNA is 933 bp and encodes a polypeptide of 311 amino acid residues. The cDNA is most similar 94% at the amino acid level to bromelain previously isolated from pineapple (BAA21929). Explants of Lactuca sativa were co-cultivated with Agrobacterium tume-faciences LBA 4404 strains containing nptII and BL1 gene for transformation. Through initial selection of regenerated explants by culturing on a kanamycin and carbenicillin containing MS medium, multiple shoots were obtained after 2 months of culture. For a complementary step of selection, putative transgenic shoots were transferred to 1/2 Ms basal medium supplemented with 100 mg/L kanamycin and 500 mg/L carbenicillin. The selected shoots were obtained T1 generation seeds with emasculation, and tested with PCR analysis using 35S promoter and BL1 specific primers whether BL1 gene was introduced to genome of the plants. These results confirmed that produced the specific PCR bands in the putative transgenic lines. Additionally the Northern blot and endo protease activity showed that transcripts of BL1 gene were detected in transgenic lines. Theses results suggest that BL1 gene be successfully integrated and transcripted in the transgenic lettuce plants.

• Korean Security Journal
• /
• no.10
• /
• pp.293-322
• /
• 2005

The culpability of a person, as determined by due process of law, for any of his actions that are defined as criminal. Determination of such responsibility is a legal function, not a psychiatric one, although a psychiatrist may be called upon to present evidence to the court in order to aid the judge or jury in reaching a decision as to responsibility. Determination of responsibility varies with the laws of the state in which the accused is being tried, but in general all states base their laws on three famous judicial decisions concerning criminal responsibility. 1. the M'Naghten(McNaughton) rule(a. to establish such a defense the accused, at the time the act was committed, must be shown to have been laboring under such defect of reason as not to know the nature and quality of the act he was doing, b. if he did know it, he did or know that what he was doing was wrong). 2. the irresistible impulse test. 3. the Durham decision. Under the Durham test, however, the psychiatrist may give any relevant testmony concerning the mental illness at issue. The psychological and behavioral appearance of a person, in clinical psychiatry this term is commonly used to refer to the results of the mental examination of a patient. The written report of the mental status usually contains specific references to the following areas: I. Attitude and General Behavior (1)General health and appearance. (2)General habits of dress. (3)Personal habits. (4)General mood. (5)Use of leisure time. (6)Degree of sociability. (7)Speech. II. Attitude and Behavior during interview (1)Co-operativeness. (2)Poise. (3)Facial expression. (4)Motor activity. (5)Mental activity. (6)Emotional reactions. (7)Trend of thought. III. Sensorium, mental grasp, and capacity (1)Orientation. (2)Memory and retention. (3)Estimate of intelligence. (4)Abstraction ability. (5)Tests of absurdity, interpretation of proverbs. (6)Judgment.

• Korean Journal of Materials Research
• /
• v.22 no.9
• /
• pp.445-449
• /
• 2012

We investigate the effects of redox reaction on preparation of high purity ${\alpha}$-alumina from selectively ground aluminum dross. Preparation procedure of the ${\alpha}$-alumina from the aluminum dross has four steps: i) selective crushing and grinding, ii) leaching process, iii) redox reaction, and iv) precipitation reaction under controlled pH. Aluminum dross supplied from a smelter was ground to separate metallic aluminum. After the separation, the recovered particles were treated with hydrochloric acid(HCl) to leach aluminum as aluminum chloride solution. Then, the aluminum chloride solution was applied to a redox reaction with hydrogen peroxide($H_2O_2$). The pH value of the solution was controlled by addition of ammonia to obtain aluminum hydroxide and to remove other impurities. Then, the obtained aluminum hydroxide was dried at $60^{\circ}C$ and heat-treated at $1300^{\circ}C$ to form ${\alpha}$-alumina. Aluminum dross was found to contain a complex mixture of aluminum metal, aluminum oxide, aluminum nitride, and spinel compounds. Regardless of introduction of the redox reaction, both of the sintered products are composed mainly of ${\alpha}$-alumina. There were fewer impurities in the solution subject to the redox reaction than there were in the solution that was not subject to the redox reaction. The impurities were precipitated by pH control with ammonia solution, and then removed. We can obtain aluminum hydroxide with high purity through control of pH after the redox reaction. Thus, pH control brings a synthesis of ${\alpha}$-alumina with fewer impurities after the redox reaction. Consequently, high purity ${\alpha}$-alumina from aluminum dross can be fabricated through the process by redox reaction.

• Journal of Embryo Transfer
• /
• v.17 no.1
• /
• pp.55-59
• /
• 2002

The objective of this study is to determine the developmental competence of in vitro matured bovine oocytes after intracytoplasmic sperm injection(ICSI) with frozen-thawed epididymal spermatozoa. The ovaries were obtained from slaughtered Korean native cows. Oocytes matured in vitro for 24 hrs were fertilized by ICSI with frozen-thawed epididymal spermatozoa. After ICSI, a group of oocytes was activated with 7% ethanol fur 5 min, and the other group was not activated. The oocytes were cultured in TCM-199 medium containing hormones and 10% FCS for 24~30 hrs in a incubator with 5% $CO_2$ in air at 38.5$^{\circ}C$. The percentage of oocytes reaching M II after 24 hrs and 30 hrs of incubation were significantly higher(p<0.05) after culture with TCM-199 media(80.0% and 88.3%) than M I(8.3% and 6.7%). The rate of cleavaged embryos to blastocyst obtained by ICSI treated activation oocytes was significantly higher(p<0.05) than that of nonactivation oocytes(22/46, 47.8% vs 10/39, 25.6%). The rates of embryos development to blastocyst obtained by ICSI treated sperm of flesh, epididymal and frozen-thawed epididymal were 24/45(53.3%), 15/40(37.5%), 11/43(25.6%), respectively and these values of fresh sperm injection were higher than frozen-thawed epididymal sperm. We also concluded that embryos can be produced with ICSI of in vitro matured oocytes by ICSI using frozen-thawed epididymal semen.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.136-146
• /
• 1999

The purpose of this study was to estimate the changes of marginal adaptation to the cavity floor of light-cured glass ionomer cement base after application of a composite restoration. Eighty non-carious extracted human molars were used in the present study. Circular cavities were prepared on the center of the exposed dentin surface to 0.5mm, 1.0mm, 1.5mm, 2.0mm in depth and the prepared cavities were pretreated with Dentin conditioner and filled with Fuji II LC(GC Int. Co., Japan). They randomly assigned into 3 groups according to the difference in application of a composite restoration; Group 1(control group): only glass ionomer base, Group 2: The application of a composite restoration surrounded by dentin with class I cavity over glass ionomer base after conventional dentin bonding to the exposed dentin and glass ionomer base, Group 3: The application of composite restoration not-surrounded by dentin over glass ionomer base after conventional dentin bonding to the exposed dentin and glass ionomer base. To examine the interface between cavity floor and light-cured glass ionomer cement base, each groups were sectioned vertically through the center of restorations with diamond saw and the gap size(${\mu}m$) of interface measured by SEM. The results were analyzed by using One Way ANOVA. The results were as follows: 1. Good adaptation between glass ionomer cement base and cavity floor was showed in specimens with 0.5mm, 1.0mm depth base of control group. But in specimens with 1.5mm, 2.0mm depth base of control group, the gap was measured about $15{\mu}m$, $40{\mu}m$ respectively. 2. Gap size in group 2 was significantly higher than that in control group(P<0.05). 3. Gap size in group 3 was significantly higher than that in control group and group 2(P<0.05). 4. It was possible to observe the good adaptation between glass ionomer cement base and dentin which was intermediated with 4-10${\mu}m$ hybrid layer in specimens with 0.5mm, 1.0mm depth base of control group. Cohesive fracture within cement base was observed in all specimens which had the gap between glass ionomer cement base & dentin. 5. It was possible to observe the gap formation between cement base and bonding agent and between composite resin and dentin in all specimens of group 2.