• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.592-597
• /
• 2020

Currently, river survey data is mainly performed by acquiring longitudinal and cross-sectional data of rivers using total stations or the GNSS(Global Navigation Satellite System). There is not much research that addresses the use of LiDAR(Light Detection and Ranging)systems for surveying rivers. This study evaluates the applicability of using LiDAR data for surveying rivers The Ministry of Land, Infrastructure and Transport recently launched a drone-based river fluctuation survey. Pilot survey projects were conducted in major rivers nationwide. Studies related to river surveying were performed using the ground LiDAR(Light Detection And Ranging)system.Accuracy was ensured by extracting the linearity of the object and comparing it with the total station survey performance. Data on trees and other features were extracted to generate three-dimensional geospatial information for the point-cloud data on the ground.Deviations were 0.008~0.048m. and compared with the results of surveying GNSS and the use of drone LiDAR data. Drone LiDAR provided accurate three-dimensional spatial information on the entire target area. It was able to reduce the shaded area caused by the lack of surveying results of the target area. Analyses such as those of area and slope of the target sites are possible. Uses of drones may therefore be anticipated for terrain analyses in the future.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.193-199
• /
• 2006

This article reviews several microwave instruments employed in observation and analysis of tropical cyclones (TCs), typhoon, and hurricanes. Microwave signals are useful for observing tropical cyclones with severe storms since it isn't severely absorbed by the clouds and rain in the storm. The instruments discussed include scatterometers, microwave radiometers, synthetic aperture radars (SARs), and rain radar from space. The date such as winds, rainfall and cloud-distribution in the TCs obtained by microwave instruments provide important informations for forecasting the intensity and path of the typhoon. For example, there're wind-distribution provided by SSM/I which has a wide swath, detailed wind fields from ERS-1, 2 scatterometers and RADARSAT-1 SAR and TRMM's rain radar pro 떠 ding high resolution. Operational satellite instruments lunched recently have improved upon the problems of low resolution and narrow swath indicated at the beginning microwave remote sensing. Understanding and practical using sufficiently about the microwave instruments will serve for searching the features such as generation and development of the TCs.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.202-207
• /
• 2008

Measures for coping with energy shortage are being sought all over the world. Following such a phenomenon, effort to use less energy in the design of buildings and equipment are being conducted. In particular, a program to evaluate the performance of a building comes into the spotlight. However. indispensable standard wether data to estimate the exact energy consumption of a building is currently unprepared. Thus, after appling standard weather data for four weather factors which were used in previous researches to Visual DOE 4.0, we compared it with the result of the existing data and evaluated them. For the monthly cooling and heating load of our target building, we used revised data for June, July, August, and September during which cooling load is applied. When not the existing data but the revised data was used, the research shows that an average of 14.9% increased in June, August, and September except for July. Also, in a case of heating load, the result by the revised data shows a reduction of an average of 11.9% from October to April during which heating load is applied. In particular, the heating loads of all months for which the revised data was used were more low than those of the existing data. In the maximum cooling and heating load according to load factors, the loads by residents and illumination for which the revised data was used were the same as those of the existing data, but the maximum cooling loads used by the two data have a difference in structures such as walls and roofs. Through the above results, the research cannot clearly grasp which weather data influences the cooling and heating load of a building. However, in the maximum loads by the change of weather data in four factors (dry-bulb temperature, web-bulb temperature, cloud amount, and wind speed) among 14 weather factors, the research shows that 5.95% in cooling load and 27.56% in heating load increased, and these results cannot be ignored. In order to make weather data for Performing energy performance evaluation for future buildings, the flow of weather data for the Present and past should be obviously grasped.

• Journal of the Korean earth science society
• /
• v.41 no.5
• /
• pp.459-468
• /
• 2020

In this study, the selection criteria for the occurrence of sea breezes in the Boseong area during the spring season (March-May) of 2016-2017 were prepared for the analysis of vertical weather characteristics. For this purpose, wind speed values were determined using the measured precipitation, cloud volume, wind direction, the difference between the ground and sea temperature, a wind Profiler at an altitude of 1 km, and numerical model data. The dates of the sea breezes in Boseong were classified according to the selection criteria, and the spatial and temporal characteristics of the sea breezes were identified by analyzing the time and altitude of the sea breeze and the size of the wind speed. Sea breezes occurred 23 out of 183 days (12%), and in Boseong, at least 1.2 out of 10 spring days exhibited sea breezes. Sea winds ranged from 1200 to 1800 LST, mainly from ground to 700 m altitude during the day. In addition, the maximum wind speed averaged 4.9 m s^-1, at an altitude of 40 m at 1600 LST, showing relatively lower values than those in a preceding study. This seems to be owing to the reduction in wind speed due to the complexity of the coastal terrain.

• Informatization Policy
• /
• v.23 no.2
• /
• pp.73-97
• /
• 2016

Social changes due to ICT like Big Data, IoT, Cloud and Mobile is progressing rapidly. Now, we get out of the old-fashioned frame was measured at the level of the information society through the introduction of PC, Internet speed and Internet subscribers etc and there is a need for a new type of diagnostic information society framework. This study is the study for the framework established to diagnose and measure post-information society. The framework and indicators were chosen in accordance with the technological society coevolution theory and information society-related indicators presented from authoritative international organizations. Empirical results utilizing the indicators and framework developed in this study were as follows: First, the three sectors, six clusters (items), 25 nodes (indicators) that make up the information society showed that all strongly connected. Second, it was diagnosed as information society development (50.34%), technology-based expansion (25.03%) and ICT effect (24.63%) through a network analysis (ANP) for the measurement of importance of the information society. Third, the result of calculating the relative importance of the cluster and nodes showed us (1)social development potential (26.04%), (2)competitiveness (15.9%), (3)ICT literacy (15.5%) (4) (social)capital (24.3 %), (5)ICT acceptance(9.54%), (6)quality of life(8.7%). Consequently, We should take into account the effect of the economy and quality of life beyond ICT infrastructure-centric when we measure the post-information society. By applying the weighting we should performs a comparison between countries and we should diagnose the level of Korea and provide policy implications for the preparation of post-information society.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.4
• /
• pp.320-331
• /
• 2013

The National Center for AgroMeteorology (NCAM) has designed a risk management solution for individual farms threatened by the climate change and variability. The new service produces weather risk indices tailored to the crop species and phenology by using site-specific weather forecasts and analysis derived from digital products of the Korea Meteorological Administration (KMA). If the risk is high enough to cause any damage to the crops, agrometeorological warnings or watches are delivered to the growers' cellular phones with relevant countermeasures to help protect their crops against the potential damage. Core techniques such as scaling down of weather data to individual farm level and the crop specific risk assessment for operational service were developed and integrated into a cloud based service system. The system was employed and implemented in a rural catchment of 50 $km^2$ with diverse agricultural activities and 230 volunteer farmers are participating in this project to get the user-specific weather information from and to feed their evaluations back to NCAM. The experience obtained through this project will be useful in planning and developing the nation-wide early warning service in agricultural sector exposed to the climate and weather extremes under climate change and climate variability.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.62-62
• /
• 2018

Pt is still considered as one of the most active electrocatalysts for ORR in alkaline fuel cells. However, the high cost and scarcity of Pt hamper the widespread commercialization of fuel cells. As a strong candidate for the replacement of Pt catalyst, silver (Ag) has been extensively studied due to its high activity, abundance, and low cost. Ag is more stable than Pt in the pH range of 8~14 as the equilibrium potential of Ag/Ag+ being ${\approx}200mV$ higher than that of Pt/PtO. However, Ag is the overall catalytic activity of Ag for oxygen reduction reaction(ORR) is still not comparable to Pt catalyst since the surface Ag atoms are approximately 10 times less active than Pt atoms. Therefore, further enhancement in the ORR activity of Ag catalysts is necessary to be competitive with current cutting-edge Pt-based catalysts. We demonstrate the architectural design of Ag catalysts, synthesized using plasma discharge in liquid phase, for enhanced ORR kinetics in alkaline media. An attractive feature of this work is that the plasma status controlled via electric-field could form the Ag nanowires or dendrites without any chemical agents. The plasma reactor was made of a Teflon vessel with an inner diameter of 80 mm and a height of 80 mm, where a pair of tungsten(W) electrodes with a diameter of 2 mm was placed horizontally. The stock solutions were made by dissolving the 5-mM AgNO3 in DI water. For the synthesis of Agnanowires, the electricfield of 3.6kVcm-1 in a 200-ml AgNO3 aqueous solution was applied across the electrodes using a bipolar pulsed power supply(Kurita, Seisakusyo Co. Ltd). The repetition rate and pulse width were fixed at 30kHz and 2.0 us, respectively. The plasma discharge was carried out for a fixed reaction time of 60 min. In case of Ag nanodendrites, the electric field of 32kVcm-1 in a 200-ml AgNO3 aqueous solution was applied and other conditions were identical to the plasma discharge in water in terms of electrode configuration, repetition rate and discharge time. Using SEM and STEM, morphology of Ag nanowires and dendrites were investigated. With 3.6 kV/cm, Ag nanowire was obtained, while Ag dendrite was constructed with 32 kV/cm. The average diameter and legth of Ag nanowireses were 50 nm and 3.5 um, and thoes values of Ag dendrites were 40 nm and 3.0 um. As a results of XPS analysis, the surface defects in the Ag nanowires facilitated O2 incorporation into the surface region via the interaction between the oxygen and the electron cloud of the adjacent Ag atoms. The catalytic activity of Ag for oxygen reduction reaction(ORR) showed that the catalytic ORR activity of Ag nanowires are much better than Ag nanodendrites, and electron transfer number of Ag nanowires is similar to that of Pt (${\approx}4$).

• Smart Media Journal
• /
• v.9 no.1
• /
• pp.75-83
• /
• 2020

Compensation services that are indispensable during large-scale public utilities projects have been gradually increasing with the recent increase in construction, but there are no systematic compensation services due to the complicated procedures and manual work. For this reason, various problems such as construction period delays due to various complaints, corruption in compensation work, and impossible to trace the history of compensation data in the past are emerging. In this paper, in order to solve this problem, in-depth interviews and questionnaires were conducted to find out the problems of each compensation status. Based on this, 3 core technologies and 10 technical needs based on ICT were selected to improve the compensation work by deriving STEEP analysis and Issue Tree. The three core technologies are big data-based decision-making and prediction technology, advanced measurement technology, and open cloud-based compensation platform technology. In order to introduce the derived technologies to the institutions in charge of compensation, the possibility of technology diffusion by project operators was suggested based on the results of the current status of informatization by institution. Based on the core technology derived from this paper, it is necessary to make a prototype that can be advanced in compensation work and apply it to each institution and analyze the effect.

• Atmosphere
• /
• v.26 no.2
• /
• pp.227-241
• /
• 2016

This study investigated the cause of the heavy snowfall that occurred in the East Coast of Korea from 6 February to 14 February 2014. The synoptic conditions were analyzed using blocking index, equivalent potential temperature, potential vorticity, maritime temperature difference, temperature advection, and ground convergence. During the case period, a large blocking pattern developed over the Western Pacific causing the flow to be stagnant, and there was a North-South oriented High-to-Low pressure system over the Korean Peninsula because of this arrangement. The case period was divided into three parts based on the synoptic forcing that was responsible for the heavy snowfall; detailed analyses were conducted for the first and last period. In the first period, a heavy snowfall occurred over the entire Korean Peninsula due to strong updrafts from baroclinic instability and a low pressure caused by potential vorticity located at the mid-troposphere. In the lower atmosphere, a North-South oriented High-to-Low pressure system over the Eastern Korea intensified the easterly airflow and created a convergence zone near the ground which strengthened the upslope effect of the Taebaek Mountain range with a cumulative fresh snowfall amount of 41 cm in the East Coast region. In the last period, the cold air nestled in the Maritime Province of Siberia and Manchuria strengthened much more than that in the first half and extended to the East Sea. The temperature difference between the 850 hPa air and the SST was large and convective clouds developed over the sea. The highest cumulative fresh snow amount of 39.7 cm was recorded in the coastal area during this period. During the entire period, vertically oriented equivalent potential temperature showed neutral stability layer that helped the cloud formation and development in the East Coast. The 2014 heavy snowfall case over the East Coast provinces of Korea were due to: 1) stagnation of the system by blocking pattern, 2) the dynamic effect of mid-level potential vorticity of 1.6 PVU, 3) the easterly air flow from North-South oriented High-to-Low pressure system, 4) the existence of vertically oriented neutral stable layer, and 5) the expansion of strong cold air into the East Sea which created a large temperature difference between the air and the ocean.

• Journal of Korean Society of Archives and Records Management
• /
• v.4 no.1
• /
• pp.67-85
• /
• 2004

Four volumes of the script of the Avatamska Sutra written with golden paste on dark blue papers manufactured in Koryo Dynasty which are collected or deposited in every museum of Japan show specific features on their cover paintings. In general 3 or 4 lotus flowers are wound by arabesque patterns in zigzag on the cover paintings of Koryo scripts, whereas 10 lotus flowers painted with golden paste on the 4 volumes of these scripts are same in their style. Though there is no prayer sentences in 4 volumes of the script, it is possible to know that they should belong to a set of 80 Avatamska Sutra by the results of above studies. In this study the contents of Byunsangwha of the script of 4 volumes of the Avatamska Sutra were discussed at first and their manufactured era should be postulated by the results of style analysis of cover paintings and Byunsangwha. First thing that saint hair of Buddha was painted with cobalt color is same as that of Byunsangwha of Munsuchoisangsungmusenggebueob prayed in Tejeong 3rd year, king Chungsuk 13th year(AD 1326). Second thing that the beads in topknot of saint hair and lips were painted completely with pink color, and ears, face outline as well as bosom outline disclosed through monk's cloth were also painted with pink color, furthermore the last thing is that Buddha's face was coated with golden paste. All of these things are same as shown in the characteristics of Byunsangwha of the scripts of Kanezawa Daishoji, Matsue Tenrinji and Haga Tera collection in Japan. However, since the cloud pattern style of Byunsangwha of the script is similar to that of the Byunsangwha manufactured in reinstatement era of king Chungsuk, it is possible to say that these 4 volumes of script should be manufactured in the reinstatement era of king Chungsuk.