• 제목/요약/키워드: Closing Velocity

검색결과 108건 처리시간 0.023초

압축기 토출벨브의 유체-구조 연계해석 및 충돌해석 (Flow Structure Interaction 3-D Reciprocating Compressor and Impact Analyses of Compressor Discharge Valve)

  • 레사 옥타비안티;김동현;박강균;정원현;안재우;문경호;고영필;김형식
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 춘계학술대회논문집
    • /
    • pp.633-640
    • /
    • 2007
  • In this paper, 3-D reciprocating compressor is taken into flow-structure interaction analysis. The full cycle process consisted of cylinder expansion and compression has been modeled without considering flow leakage through cylinder wall. Fully-coupled FSI analysis of this compressor model was iteratively solved and gives sufficient result with the experimental test. The study is emphasized to thoroughly investigate discharge valve motion, opening and closing, in order to determine discharge valve region which is prone to have high effective stress. The cylinder pressure is successfully validated before conducting impact analyses between discharge valve and other susceptible supported structure. Velocity profile has been obtained in FSI analysis is used as initial condition to carry out further impact analyses. Stress result of discharge valve and valve spring gives preliminary estimation of higher stress area due to its impact phenomena.

  • PDF

정상초음파장이 메탄/공기 예혼합화염의 거동에 미치는 영향 (Effects of an Ultrasonic Standing-wave Field on the Behavior of Methane/Air Premixed Flame)

  • 서항석;이상신;김정수;이도형
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제37회 추계학술대회논문집
    • /
    • pp.303-306
    • /
    • 2011
  • 본 연구에서는 연소 불안정성의 능동적 제어를 위해 정상초음파장이 예혼합화염의 거동에 미치는 영향을 규명하기 위한 실험 결과를 제시한다. 화염구조변이를 관찰하기 위해 슐리렌 기법을 이용하였으며, 초기압력 및 연소챔버 개폐 유무에 따라 화염선단의 형태 및 화염 전파속도를 고찰하였다. 정상초음파장에 의한 화염선단의 찌그러짐이 관찰되었고, 반사파와 정상초음파의 영향으로 연꽃모양의 화염(lotus flame)이 형성되는 것을 확인할 수 있었다.

  • PDF

플러그 밸브의 포트형상 변화에 따른 유동특성 연구 (A study on the flow characteristics in a plug valve with various port shapes)

  • 최근우;박권종;김윤제
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
    • /
    • pp.259-264
    • /
    • 2000
  • The functions of the plug valve are the control of flow rate as well closing and opening pipe lines. Analyses on the flow characteristics in plug valve port are required to improve the performance and safety at severe operating conditions such as high-pressure and high-temperature. In this study, numerical analyses are carried out with varying the opening rate (fraction of the full open to close) of the valve and the shapes of valve Uk: straight, convex, concave and mixed shapes. The parameters influencing the flow characteristics in the valve are the discharge coefficient( $C_v$) and the resistance coefficient( K). Therefore, the distributions of static pressure, velocity vector and stream lines are investigated, and $C_v$ and K are calculated in each opening rate and shape. In case of full open, the static pressure passed through the valve port has almost been recovered. However, in case of other opening rates, the pressure does not permanently regained due to pressure drop leading to loss. This phenomenon in each shape of the valve shows the different behaviors. Calculation results show that the mixed shape has the best flow attribute.

  • PDF

뇌졸중 환자에서 스파이랄 테이핑이 자세 안정성에 미치는 영향 (Effects of Spiral Balance Taping on Postural Balance Ability in Stroke Patient)

  • 이정훈;정현우;김경윤;박종항;김찬규
    • 동의생리병리학회지
    • /
    • 제23권4호
    • /
    • pp.908-913
    • /
    • 2009
  • This study was conducted to investigate the influence that it has on the application pre and post balance index using method with spiral and reaction point balance taping application against 20 stroke patients. The taping application pre and post static eye opening balance index was statistically no significant difference in the Mean X Speed, and the Extent in X Dirction but in the Mean Y Speed, the Velocity Moment, and Extent in Y Direction, there were statistically significant difference(p<0.05). The taping application pre and post static eye closing balance inde was statistically no significant difference in the Mean X Speed, in Y Direction, there were statistically significant difference(p<0.05). From above results, the method of the applied taping was the equilibrium stability performance of the Y-axis than the stability of the balance of the X-axis, therefore it is considered to study the taping application method in the balance of detail stroke patients.

가압펌프장의 수격완화설비에 대한 보수·보강 사례 (Case Study of Repair Works on Surge Suppression Device for Booster Pumping Station)

  • 김상균;이동근;이계복;김경엽
    • 한국유체기계학회 논문집
    • /
    • 제8권4호
    • /
    • pp.20-26
    • /
    • 2005
  • When the pumps are started or stopped for the operation or tripped due to the power failure, the hydraulic transients occur as a result of the sudden change in velocity. The field tests on the waterhammer were carried out for Pangyo booster pumping station in which had six booster pumps and two in-line pumps with the motor of output 1,700 kW, respectively. The booster pumping station was equipped with the pump control valve as the main surge suppression device, and the surge relief valve as auxiliary one. But the pump control valve had not early controlled in the planned closing mode, the slamming occurred to the valve of which abruptly closed during the large reverse flow. Because the positive pressure wave caused by the pump failure was superposed on the slam surge, the upsurge increased so extremely that the pump control valve was damaged. After the air chambers were additionally installed in the booster pumping station, it was preyed that the water supply system acquire the safety and reliability on the pressure surge.

직결식 펌프의 수격현상 (Waterhammer For In-line Booster Pump)

  • 김상균;이계복;김경엽
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
    • /
    • pp.208-216
    • /
    • 2004
  • The waterhammer occured when the pumps are started or stopped for the operation or tripped due to the power failure, the hydraulic transients occur as a result of the sudden change in velocity. The field tests of the waterhammer were carried out for PanGyo booster pumping station. The PanGyo pumuing station was installed booster pump of 6 sets and in-line pump of 2 sets. The main surge suppression device was equipped with the pump control valve and the surge relief valve as auxiliary. However, the pump control valve had not early controlled in the planned closing mode, and the slamming occurred to the valve of which abruptly closed during the large reverse flow. Because the pressure wave caused by the pump failure was superposed on the slam surge, the upsurge increased so extremely that the shaft of the valve was damaged. After the addition surge suppression device was equipped with air chamber. Further more in-line pump is needed surge suppression device that the pumping station acquired the safety and reliability for the pressure surge.

  • PDF

원심펌프의 시동 및 정지에 따른 수격현상 (Waterhammer Caused by Startup and Stoppage of a Centrifugal Pump)

  • 김경엽;김점배
    • 한국유체기계학회 논문집
    • /
    • 제7권1호
    • /
    • pp.51-57
    • /
    • 2004
  • The waterhammer has recently become more important because the pumping stations were big and the systems conveying the fluid through the large and long transmission pipelines were complex. When the pumps are started or stopped for the operation or tripped due to the power failure, the hydraulic transients occur as a result of the sudden change in velocity As the pressure waves are propagating between the pumping station and the distributing reservoir, the pressure inside the pipe drops to the liquid vapor pressure with the pipeline profile, at which time a vapor cavity forms, and finally the column separation occurs. If the pressure in the pipe is less than the atmospheric pressure, the pipe can be collapsed and destroyed after the water columns separated by the vapor cavity rejoin. During the reverse flow, the pressure is so abnormally increased at the pumping station that the accident of flooding may happen due to the failure of system. In this paper, the field tests on the waterhammer by the startup, stoppage, and power failure of a centrifugal pump were carried out for Yongma transmission pumping station in Seoul. The experimental results were compared with that of the numerical calculations, in which results the procedure of controlled pump normal shut-down and the two-step closing mode of controlling the ball valve for pump emergency stop are proposed to reduce the pressure surge.

Mandibular Kinesiograph를 이용한 하악운동의 형태와 PRI(Pantographicc Reproducibility Index)와의 비교 (A STUDY ON THE CORRELATIONSHIP BETWEEN PANTOGRAPHIC REPRODUCIBILITY INDEX(PRI) AND PATTERNS OF MANDIBULAR MOVEMENTS USING MANDIBULAR KINESIOGRAPH)

  • 최정호;송광엽;박찬운
    • 대한치과보철학회지
    • /
    • 제29권1호
    • /
    • pp.289-303
    • /
    • 1991
  • The purpose of this study is to investigate the correlationship between Pantographic Reproducibility Index(PRI) scores and patterns of mandibular movements by mandibular kinesiograph(MKG) that has been used to diagnose temporomandibular disorders. PRI scores have been measured in normal and symptom groups by tracing Denar mechanical pantograph. Maximum lateral deviation, opening & closing velocity, and clinical rest position of mandibular movements have been analyzed in the same group when the mandible is opened and closed. According to to Helkimo's Dysfunction Index, the students and graduates of College of Dentistry are classified as 6 normal groups and 42 symptom groups. The obtained reslts are as follows : 1. The mean of PRI scores was larger in symptom groups than in normal groups. 2. The mean of maximal laterotrusion in frontal trajectory was larger in symptom groups than in normal groups. 3. There was little significant correlationship observed between PRI scores and patterns of mandibular movements by MKG.

  • PDF

Some articulatory reflexes observed in intervocalic consonantal sequences: Evidence from Korean place assimilation

  • Son, Minjung
    • 말소리와 음성과학
    • /
    • 제12권2호
    • /
    • pp.17-27
    • /
    • 2020
  • This paper examines kinematic characteristics of /pk/ clusters, as compared to /kk/ and /pp/ with varying vowel contexts and speech rate. The results of EMMA data from eight Seoul-Korean speakers indicate as follows. Firstly, comparing /pk/ to /pp/ sequences, lips closing movement was faster and spatially greater in the /a/-to-/a/ context while temporally longer in the /i/-to-/i/ context. It was smaller in spatial displacement and shorter in temporal duration in /pk/ sequences. Peak velocity did not vary. Secondly, comparing /pk/ with /pp/ and /kk/ controls, lip aperture was less constricted in the /a/-to-/a/ context than /i/-to-/i/, but the maximum contact between the upper and lower lips was invariant across different vocalic contexts within /pk/ sequences (/apka/=/ipki/). Categorical reduction of C1 in /pk/ sequences fell in with the low-vowel and fast-rate conditions with across-/within-speaker variability. Gradient reduction of C1 was observed in all C1C2 types, being more frequent in fast rate. Lastly, the jaw articulator was a stable indicator of rate effects. The implication of the current study is that gestural reduction occurs with categorical reduction and general spatiotemporal weakening in the assimilating contexts, while quantitative properties of gestures may be a reason for gradient reduction, not necessarily confined to place assimilation.

Optimization Design for Dynamic Characters of Electromagnetic Apparatus Based on Niche Sorting Multi-objective Particle Swarm Algorithm

  • Xu, Le;You, Jiaxin;Yu, Haidan;Liang, Huimin
    • Journal of Magnetics
    • /
    • 제21권4호
    • /
    • pp.660-665
    • /
    • 2016
  • The electromagnetic apparatus plays an important role in high power electrical systems. It is of great importance to provide an effective approach for the optimization of the high power electromagnetic apparatus. However, premature convergence and few Pareto solution set of the optimization for electromagnetic apparatus always happen. This paper proposed a modified multi-objective particle swarm optimization algorithm based on the niche sorting strategy. Applying to the modified algorithm, this paper guarantee the better Pareto optimal front with an enhanced distribution. Aiming at shortcomings in the closing bounce and slow breaking velocity of electromagnetic apparatus, the multi-objective optimization model was established on the basis of the traditional optimization. Besides, by means of the improved multi-objective particle swarm optimization algorithm, this paper processed the model and obtained a series of optimized parameters (decision variables). Compared with other different classical algorithms, the modified algorithm has a satisfactory performance in the multi-objective optimization problems in the electromagnetic apparatus.