• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.1
• /
• pp.78-86
• /
• 1995

Abstract We have investigated the structure and the conductivity of the CdTe films evaporated on the glass substrates by Electron Beam Evaporator (EBE) technique. The structure is observed to be polycrystalline whose phase is mainly hexagonal phase with some cubic phase. Dark electric conductivity is of the order of $1-^{-8} {\Omega}^{-1} cm^{-1}$ and slightly increased by annealing for an hour at $300^{\circ}C$. Activation energy calculated from the electrical conductivity which varies with increasing temperature is 1.446 eV in the case of room temperature substrates. The values of optical band gap are 1.52 eV in direct transition whereas 1.44 eV in indirect. The photoconductivity of the films is of the order of $1-^{-8} {\Omega}^{-1} cm^{-1}$ and the peak energy is about 600 nm in the room temperature. The photoconductivity starts to increase at 850 nm, which is close to 1.446 eV, the activation energy of CdTe polycrystal films.

• Journal of Convergence for Information Technology
• /
• v.8 no.1
• /
• pp.313-320
• /
• 2018

The purpose of the study is to suggest ways to reduce the difference in occupancy rate and cost of incubation centers and surveyed 262 business disclosures of KBIA. the region, the subject of management, and the technology field are set as independent variables among the management disclosure items, and the occupancy rate, cost, and assigned grade are defined as dependent variables. As a result of the correlation analysis, it was found that about 19.4%($R^2=0.194$) and about 7.0%($R^2=0.059$) explain the cost of the operation, Respectively. finally Costs are high in metropolitan areas, public organizations and technology-intensive centers are inexpensive, occupancy rates are high in government and universities, and low in large cities. In order to resolve the gap, $5,720won/m^2$ is appropriate, and the center operates as a technology-intensive specialization center.

• Journal of the Korean Ceramic Society
• /
• v.40 no.11
• /
• pp.1113-1119
• /
• 2003

We used isopropanol which has low boiling point to prepare thin films at low temperature and changed mole concentration of zinc acetate from 0.3 to 1.3 mol/l. The structural, optical and electrical properties of ZnO thin films with Zn content were investigated. ZnO thin films highly oriented along the c-axis were obtained at Zn concentration of 0.7 mol/l. ZnO thin films with Zn concentration of 0.7 mol/l showed a homogeneous surface layer of nano structure. The transmittance of ZnO thin films by UV-vis. measurement was about 87% under the Zn concentration of 0.7 mol/l, but rapidly decreased over the 1.0 mol/l. The optical band gap energy was obtained from 3.07 to 3.22 eV which is very close to the band gap of bulk ZnO (3.2 eV). The electrical resistivity of ZnO thin films was about 150 $\Omega$-cm that shows little difference with Zn concentration. I-V curves of ZnO thin films exhibited typical ohmic contact properties.

• Fisheries and Aquatic Sciences
• /
• v.27 no.6
• /
• pp.366-378
• /
• 2024

Application of commercial hormone failed to promote breeding in certain Pangasius species due to the differences of gonadotropin-releasing hormone specific peptide with species-specific bioactivities. Gonadotropin-releasing hormone (GnRH) is a hypothalamic decapeptide in the reproductive system that plays a crucial role in the regulation of reproductive processes. This study was performed to determine and analyse the GnRH genes from commercially important Pangasius sp., Pangasianodon hypophthalmus and Pangasius nasutus. The GnRH1 and GnRH2 genes were amplified and cloned into TOPO vector, followed by phylogenetic analysis of a complete open reading frame (ORF) of GnRH genes. The GnRH1 and GnRH2 genes of P. hypophthalmus and P. nasutus were detected at 300 bp and 360 bp, encoded for 81 and 87 amino acids, respectively. Amino acid sequence identities revealed high homology of P. hypophthalmus and P. nasutus GnRH1 and GnRH2 genes in comparison with other fish and vertebrates. Phylogenetic tree showed that fish from various families were aggregated into a group of the same order due to their highest identity similarities. It revealed that the vertebrate formed clusters and are grouped according to their GnRH decapeptide and GnRH-associated peptide (GAP) region, indicating a close relationship among GnRH decapeptide and GAP in different vertebrate species.

• Development and Reproduction
• /
• v.5 no.2
• /
• pp.115-122
• /
• 2001

Production of a mature oocyte is a complex process that requires the close association between oocyte and follicular cells. The present study was conducted to investigate the difference between oocytes with and without close junctional communication with cumulus cells and the involvement of two connexins(CXs) in the interactions. Follicles at different sizes(small: 200～400 ㎛; large:>450 ㎛) were mechanically isolated from PMSG-primed mouse ovaries, and punctured to get cumulus-oocyte complex(COC). Oocytes were released themselves(denuded), with partially attached(partial), or with tightly attached(intact) cumulus cells. Maturation and fertilization capacity of the COCs were measured. Expression of CX 37 and CX 43 was examined by RT-PCR and in situ hybridization. The ratio between intact COC and denude/partial oocytes was 30％(SI) and 70％(SPD) in small follicles, while 55％(LI) and 45％(LPD) in large follicles, respectively. Maturation and fertilization rates of the released oocytes were similar among SI, LPD, LI groups, but those were significantly lower in SPD oocytes. In oocytes, CX 37 was the major CX and CX 43 was not expressed, whereas in the cumulus cells, CX 43 was the major, and CX 37 was the next. Results of the present study suggest that 1) immature oocytes from small follicles with intact cell-to-cell communication with cumulus have the similar quality to that of the oocytes from larger follicles, 2) gap junction between oocyte and cumulus cells may be the heterotypic channel, and 3) we could not explain the difference in the cell-to-cell communication between intact and partial/denuded COCs through the expression of the two CXs.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.3
• /
• pp.181-186
• /
• 2002

We study a role of the proto-accretion disk during the formation of the planetary system, which is motivated with recent X-ray observations. There is an observational correlation of the mass of extrasolar planets with their orbital period, which also shows the minimum orbital period. This is insufficiently accounted for by the selection effect alone. Besides, most of planetary formation theories predict the lower limit of semimajor axes of the planetary orbits around 0.01 AU. While the migration theory involving the accretion disk is the most favorable theory, it causes too fast migration and requires the braking mechanism to halt the planet~0.01 AU. The induced gap in the accretion disk due to the planet and/or the truncated disk are desperately required to stop the planet. We explore the planetary evaporation in the accretion disk as another possible scenario to explain the observational lack of massive close-in planets. We calculate the location where the planet is evaporated when the mass and the radius of the planet are given, and find that the evaporation location is approximately proportional to the mass of the planet as ${m_p}^{-1.3}$ and the radius of the planet as ${r_p}^{1.3}$. Therefore, we conclude that even the standard cool accretion disk becomes marginally hot to make the small planet evaporate at~0.01 AU. We discuss other auxiliary mechanisms which may provide the accretion disk with extra heats other than the viscous friction, which may consequently make a larger planet evaporate.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.215-221
• /
• 2023

Proton treatment may deliver a larger dose to a patient's skin than traditional photon therapy, especially when a range shifter (RS) is inserted in the beam path. This study investigated the effects of an RS on skin dose while considering RS with different thicknesses, airgaps and materials. First, the physical model of the scanning nozzle with RS was established in the TOol for PArticle Simulation (TOPAS) code, and the effects of the RS on the skin dose were studied. Second, the variations in the skin dose and isocenter beam size were examined by reducing the air gap. Finally, the effects of different RS materials, such as polymethylmethacrylate (PMMA), Lexan, polyethylene and polystyrene, on the skin dose were analysed. The results demonstrated that the current RS design had a negligible effect on the skin dose, whereas the RS significantly impacted the isocenter beam size. The skin dose was increased considerably when the RS was placed close to the phantom. Moreover, the magnitude of the increase was related to the thickness of the inserted RS. Meanwhile, the results also revealed that the secondary proton primarily contributed to the increased skin dose.

• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1784-1793
• /
• 2001

The flow fields around an elliptic cylinder of axis ratio AR=2 adjacent to a free surface were investigated experimentally using a water channel. The main objective is to understand the effect of the free surface on the flow structure in the near-wake. The flow fields were measured by varying the depth of cylinder submergence, for each experimental condition, 350 velocity fields were measured using a single-frame PIV system and ensemble-averaged to obtain the spatial distribution of turbulent statics. For small submergence depths a large-scale eddy structure was observed in the near-wake, causing a reverse flow near the free surface, downstream of the cylinder. As the depth of cylinder submergence was increased, the flow speed in the gap region between the upper surface of the cylinder and the free surface increased and formed a substantial jet flow. The general flow structure of the elliptic cylinder is similar to previous results for a circular cylinder submerged near to a free surface. However, the width of the wake and the angle of downward deflection of the shear layer developed from the lower surface of the elliptic cylinder are smaller tan those for a circular cylinder.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.7
• /
• pp.1146-1151
• /
• 2003

In this paper, results of an analysis of driving behavior characteristics and a driver-adaptive control algorithm for adaptive cruise control systems have been described. The analysis has been performed based on real-world driving data. The vehicle longitudinal control algorithm developed in our previous research has been extended based on the analysis to incorporate the driving characteristics of the human drivers into the control algorithm and to achieve natural vehicle behavior of the adaptive cruise controlled vehicle that would feel comfortable to the human driver. A driving characteristic parameters estimation algorithm has been developed. The driving characteristics parameters of a human driver have been estimated during manual driving using the recursive least-square algorithm and then the estimated ones have been used in the controller adaptation. The vehicle following characteristics of the adaptive cruise control vehicles with and without the driving behavior parameter estimation algorithm have been compared to those of the manual driving. It has been shown that the vehicle following behavior of the controlled vehicle with the adaptive control algorithm is quite close to that of the human controlled vehicles. Therefore, it can be expected that the more natural and more comfortable vehicle behavior would be achieved by the use of the driver adaptive cruise control algorithm.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3625-3634
• /
• 2021

The crossflow is the key phenomenon in turbulent flow inside rod bundles. In order to establish confidence on application of computational fluid dynamics (CFD) to simulate the crossflow in rod bundles, three Reynolds-Averaged Navier Stokes (RANS) models i.e. the realizable k-ε model, the k-ω SST model and the Reynolds stress model (RSM), and the Large Eddy simulations (LES) with the Wall-Adapting Local Eddy-viscosity (WALE) model are validated based on the Particle Image Velocimetry (PIV) flow measurement experiment in a 5 × 5 rod bundle. In order to investigate effects of periodic boundary condition in the gap, the numerical results obtained with four inner subchannels are compared with that obtained with the whole 5 × 5 rod bundle. The results show that periodic boundaries in the gaps produce strong errors far downstream of the spacer grid, and therefore the full 5 × 5 rod bundle should be simulated. Furthermore, it can be concluded, that the realizable k-ε model can only provide reasonable results very close to the spacer grid, while the other investigated models are in good agreement with the experimental data in the whole downstream flow in the rod bundle. The LES approach shows superiority to the RANS models.