• Structural Engineering and Mechanics
• /
• v.48 no.4
• /
• pp.479-500
• /
• 2013

This paper presents the experimental as well as analytical study conducted on layer-bonded scrap tire rubber pad (STRP) isolators to develop low-cost seismic isolators applicable to structures in developing countries. The STRP specimen samples were produced by stacking the STRP layers one on top of another with the application of adhesive. In unbonded application, the STRP bearings were placed between the substructure and superstructure without fastening between the contact surfaces which allows roll-off of the contact supports. The vertical compression and horizontal shear tests were conducted with varying axial loads. These results were used to compute the different mechanical properties of the STRP isolators including vertical stiffness, horizontal effective stiffness, average horizontal stiffness and effective damping ratios. The load-displacement relationships of STRP isolators obtained by experimental and finite element analysis results were found to be in close agreement. The tested STRP samples show energy dissipation capacity considerably greater than the natural rubber bearings. The layer-bonded STRP isolators serve positive incremental force resisting capacity up to the shear strain level of 150%.

• Journal of the Korean Chemical Society
• /
• v.58 no.2
• /
• pp.198-204
• /
• 2014

In this present study, bagasse based pulp and paper industry wastewater was treated under different operating conditions such as initial pH (6-8), temperature ($25-35^{\circ}C$) and contact time (3-7 days) by using Bacillus subtilis. Response surface methodology (RSM) coupled with Box-Behnken response surface design (BBD) was employed to investigate the effect of process variables on the responses such as turbidity, biological oxygen demand (BOD) and chemical oxygen demand (COD) removal. The experimental data were analyzed by Pareto analysis of variance (ANOVA) and the second order polynomial models were developed. Interactive effects of the process variables on the responses were studied using plotting 3D response surface contour graph and the optimum process conditions were found to be: initial pH of 7, temperature of $30^{\circ}C$ and contact time of 5 days. Under these conditions, removal efficiencies of turbidity, BOD and COD were found to be 85%, 93% and 80% respectively which are close agreement with real experiments. These results indicate that the treatment of bagasse based pulp and paper industry wastewater using Bacillus subtilis is an effective and novel technique.

• Applied Microscopy
• /
• v.24 no.3
• /
• pp.87-93
• /
• 1994

In order to elucidate the machinability of lead brass, orthogonal machining experiment was conducted in SEM(Scanning Electron Microscope) equipped with a micro-machining device at a cutting speed of $7{\mu}m/s$ for brass containing 0.2 to 3wt% Pb. The microfactors (i.e., shear angle, contact length between chip and tool) were determined by in-situ observations. Machinability of brass containing lead is discussed in terms of the microfactors and the cutting resistant force tested by lathe cutting. The dynamic behavior of the chip formation of lead brass during the machining process was examined: The chips of lead brass form as a shear angle type. The shear angle increases with the content of lead in (6:4) brass. The pronounced effect of lead on the contact length between chip and tool was observed above 1% Pb. The cutting resistant force tested by lathe decreases remarkably with the lead content in brass. The observed microfactors are in close relation to the tested resistant force in macromachining.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.167-173
• /
• 2004

The amount of cesium released from the leaching of spent fuels in contact with and without the compacted bentonite bloc]t which was compacted as the density of $1.4g/\textrm{cm}^3$, up to 5.7 years were measured and the empirical formula of the fractional release rate of cesium were derived from these measured values. The empirical formulas show that the long-term release rate of cesium under a repository would become a constant, as about $3{\times}10_{-6}$ fraction/day, after a certain period. The cumulative fractions of cesium released from the spent fuel with bentonite and with copper and stainless steel sheets were steadily increased, but the fraction from bare fuel was rapidly increased and then sluggishly increased. However, the remained value except its gap inventory from the cumulative fraction of cesium released from bare fuel was almost very close to the others. This suggests that the initial release of cesium from bare fuel might be dependant on its gap inventory.

• Advances in pediatric surgery
• /
• v.5 no.1
• /
• pp.69-74
• /
• 1999

Condyloma acuminata, an uncommon disease m the pediatric patients, is being reported with increasing frequency in both adults and children. During the last 10 years, we managed 11 children with condyloma acuminata of the anogenital area. The patients' age at presentation varied from 9 months to 11 years, and boys outnumbered girls by a ratio of 2 : 1. The lesions were found in the perianal area in 9 patients and the genital area in 2. No history of sexual contact or abuse could be elicited. Although the exact mode of transmission of human papillomavirus(HPV) couldn't be defined, maternal-infant transmission at birth and close nonsexual family contact were the main possible causes of HPV infection in our patients. Our experience suggest that fulguration of the warts and concomitant excision with scissors of the larger lesions are the most satisfactory method of treatment in children. However, condyloma acuminata have high recurrence rate despite these treatments. Viral typing and careful epidemiological investigation on a larger series of patients may clarify the causative factors and effective modalities of treatment in childhood anogenital condyloma acuminata.

• Economic and Environmental Geology
• /
• v.28 no.1
• /
• pp.1-8
• /
• 1995

The smectite-rich clays were found locally in Paleozoic calcareous sedimentary rocks in the Samcheok area. Their occurrences were investigated in detail, and the physico-chemical properties of the clays were also determined by X-ray diffraction, chemical analysis, thermal analysis and cation exchanging experiment. The smectite clays occur as the fissure filling dyke developed in calcareous sedimentary rock and as alteration products of intrusive rhyolite. Most of clays occur at the contact between the sedimentary rock and the rhyolite, and the alteration zone was observed only in rhyolite body close to the contact. Judging from their occurrences, it is believed that the smectite-rich clays in this area were formed by the hydrothemal alteration. The smectite clays from the area are mainly composed of Ca-montmorillonite, and associated with small quantities of quartz, opal-CT and feldspar. The montmorillonites from this area are lower in Fe content, and higher in exchangeable Ca ion, compared to those of bentonite from the Yangnam-Yeongil area.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.3
• /
• pp.24-28
• /
• 2005

Stress state of chip formation zone is one of the main problems in metal cutting mechanics. In two-dimensional case this process is usually considered as consistent shears of work material along one of several shear surfaces, separating chip from workpiece. These shear planes are assumed to be trajectories of maximum shear stress forming corresponding slip-line field. This paper suggests a new approach to the constriction of slip-line field, which implies uniform compression in chip formation zone. Based on the given model it has been found that imaginary shear line in orthogonal cutting is close to the trajectory of maximum normal stress and the problem about its determination has been considered as well. It has been shown that there is a second central slip-line field inside chip, which corresponds well to experimental data about stress distribution on tool rake face and tool-chip contact length. The suggested model would be useful in understanding mechanistic problems in machining.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.11 no.sup1
• /
• pp.38-43
• /
• 2008

Enterobiasis and head lice infestations, contact-borne parasitic diseases, are the most prevalent parasitic infections of children in Korea, and they are transmitted by close contact with infected persons. They are not of major concern in public health, therefore their importance in children's health care are overlooked in Korea. Egg positive rates of Enterobius vermicularis have been reported to be 10~20% among children in kindergartens and primary schools. Enterobiasis is diagnosed by scotch tape anal swab, but repeated examination is necessary for accurate diagnosis. Albendazole or mebendazole are extremely effective for treatment, however, reinfections usually occur if treatment is not repeated at least three times at a 3-week-interval, targeting the whole family members including the patients. Environmental sanitation and health education are also necessary to guarantee the successful treatment of enterobiasis. Head lice infestation is still an indication of public health status. Children of 3 to 12 years old and their families have infestations more frequently, and girls have more than boys. Diagnosis can be made by identification of live lice or nits on the head. Pediculicides are effective treatment of infestations, however they do not kill nits completely, requiring second treatment. Recently wet combing is preferred as an alternative by parents in England because of possible toxicity of drugs and resistance of lice. It is impossible to completely prevent enterobiasis and/or head lice infestations. Therefore, mass screening and prevention are required, and, in local clinics, a thorough evaluation of the symptoms and past history, and appropriate laboratory tests are necessary.

• Korean Journal of Human Ecology
• /
• v.24 no.6
• /
• pp.811-827
• /
• 2015

The purpose of this study was to explore the factors related to depression of female elderly living alone by region. Data for this study was based on the 2011 National Survey on Elderly. Total of 1,684(689 rural elderly, 995 urban) community samples of female elderly living alone participated in this study. Even though there was no difference of depression score by region, this study found that the effects of factors on depression were significantly different by region. Yearly income, subjective health, balanced exchange of emotional support and satisfaction with their children were significantly associated with depression of both rural and urban female elderly living alone. For rural female elderly living alone, average daily television viewing time, number of close friends and frequency of contact with friends/neighbors were significant predictors to their depression. In the case of urban female elderly living alone, exercise, frequency of message, email or telephone contact with friends/ neighbors and balanced exchange of economic support contributed significantly to the prediction of depression. Subjective health had the strongest effect on depression for both rural and urban female elderly living alone.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.250-255
• /
• 2004

The aim of this work was to investigate the adsorption isotherm and kinetic model for the biosorption of lead $(Pb^{2+})$ by Rhodotorula aurantiaca and to examine the environmental factors for this metal removal. Within five minutes of contact, $Pb^{2+}$ sorption reached nearly 86% of the total $Pb^{2+}$ sorption. The optimum initial pH value for removal of $Pb^{2+}$ was 5.0. The percentage sorption increased steeply with the biomass concentration up to 2 g/l and thereafter remained more or less constant. The Langmuir sorption model provided a good fit throughout the concentration range. The conformity of these data to the Langmuir model indicated that biosorption of $Pb^{2+}$ by R. aurantiaca could be characterized as a monolayer, single-site type phenomenon with no interaction between ions adsorbed in neighboring sites. The maximum $Pb^{2+}$ sorption capacity $(q_{max})$ and Langmuir constant (b) were 46.08 mg/g of biomass and 0.04 l/mg, respectively. The pseudo second-order equation was well fitted to the experimental data. The correlation coefficients for the linear plots of t/q against t for the second-order equation were 0.999 for all the initial concentrations of biosorbent for contact times of 180 min. The theoretical $q_{eq}$ value was very close to the experimental $q_{eq}$ value.