본 논문에서는 전력소모 감소 및 강건성 (robustness) 향상을 위한 새로운 구조의 플립-플롭을 제안한다. 가변 샘플링 윈도우 플립-플롭(Variable sampling window flip-flop, VSWFF)은 입력 데이터에 따라 샘플링 윈도우의 폭을 변화시켜 강인한 데이터-래치 동작을 제공할 뿐 아니라 더욱 짧은 hold time을 갖는다. 또한, 이 플립-플롭은 입력 스위칭 행위(input switching activity)가 큰 경우에 기존의 저전력 플립-플롭보다 내부 전력소모를 감소시킬 수 있다. 클럭 진폭 감쇄형 가변 샘플링 윈도우 플립-플롭(Clock swing-reduced variable sampling window flip-flop, CSR-VSWFF)은 작은 스윙 폭의 클럭을 사용함으로써 클럭분배망(clock distribution network)의 전력소모를 감소시킬 수 있다. 기존의 클럭 진폭 감쇄형 플립-플롭(Reduced clock swing flip-flop, RCSFF)과 달리, 제안된 플립-플롭은 공급전압만으로 동작하므로 고전압의 발생 및 분배로 인한 설계 상의 비용증가를 제거한다. 시뮬레이션 결과, 기존의 플립-플롭과 비교하여 더욱 좁은 샘플링 윈도우에서도 불변의 지연값(latency) 을 유지하고 전력-지연 곱(power-delay product, PDP)이 개선됨을 확인하였다. 제안된 플립-플롭의 성능을 평가하기 위하여 $0.3\mu m$ CMOS 공정기술을 이용하여 테스트 칩을 설계하였으며, 실험 결과, VSWFF는 입력 스위칭 행위가 최대일 때 전력소모가 감소하며 CSR-YSWFF를 이용하여 설계된 동기 카운터는 부가 고전압의 사용 없이 전력소모가 감소됨을 확인하였다.
This paper describes a design of AES-based CCM Protocol for IEEE 802.11i Wireless LAN Security. The CCMP core is designed with 128-bit data path and iterative structyre which uses 1 clock cycle per round operation. To maximize its performance, two AES cores are used, one is for counter mode for data confidentiality and the other is for CBC(Cipher Block Chaining) mode for authentication and data integrity. The S-box that requires the largest hardware in AES core is implemented using composite field arithmetic, and the gate count is reduced by about 23% compared with conventional LUT-based design. The CCMP core designed in Verilog-HDL has 35,013 gates, and the estimated throughput is about 768Mbps at 66-MHz clock frequency.
This paper presents the design of high speed processor for a sequence logic control using field programmable gate array(FPGA). The sequence logic controller is widely used for automating a variety of industrial plants. The FPGA designed by VHDL consists of program and data memory interface block, input and output block, instruction fetch and decoder block, register and ALU block, program counter block, debug control block respectively. Dedicated clock inputs in the FPGA were used for high speed execution, and also the program memory was separated from the data memory for high speed execution of the sequence instructions at 40 MHz clock. Therefore it was possible that sequence instructions could be operated at the same time during the instruction fetch cycle. In order to reduce the instruction decoding time and the interface time of the data memory interface, an instruction code size was implemented by 16 bits or 32 bits respectively. And the real time debug operation was implemented for easy debugging the designed processor. This FPGA was synthesized by pASIC 2 SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package was applied to sequence control system with inputs and outputs of 256 points. The designed processor for the sequence logic was compared with the control system using the DSP(TM320C32-40MHz) and conventional PLC system. The designed processor for the sequence logic showed good performance.
본 고에서는 디지털 회로의 저 전력소모의 설계와 구현에 관련된 디지털 전대역 회로 설계를 통해서 전반적인 전력 소모의 방법론과 이의 특성을 고찰하고자 한다. 디지털 집적회로의 설계는 광대하고 복잡한 영역이기에 우리는 이를 저전력 소모의 전반적인 회로 설계에 한정할 필요가 있다. 여기에는 로직회로의 합성과, 디지털 전대역 회로설계에 포함되어 있는 입력 clock 버퍼, 레치, 전압 Regulator, 그리고 케페시턴스와 전압기가 0.12 마이크론의 기술로 0.9V의 전압과 함께 쓰여져서 동적 그리고 정적 에너지 소모와 압력, 가속, Junction temperature 등을 모니터 할 수 있게 되어 있다.
A novel switched-capacitor circuit for interfacing capacitive microtransducers with a digital system is developed based on the dual-slope integration. It consists of a differential integrator and a comparator. Driven by the teo phase clock, the circuit first senses the capacitance difference between the transducer and the reference capacitor in the form of charge, and accumulates it into the feedback capabitor of the integrator for a fixed period of time. The resulant accumulated charge is next extracted by the known reference charge until the integrator output voltage refurns to zero. The length of time required for the integrator output to return to zero, as measured by the number of clock cycle gated into a counter is proportional to the capacitance difference, averaged over the integration period. The whole operation is insensitive to the reference voltage and the capacitor values involved in the circuit, Thus the proposed circuit permits an accurate differental capacitance measurement. An error analysis has showh that the resolution as high as 8 bits can be expected by realizing the circuit in a monolithic MOS IC form. Besides the accuracy, it features the small device count integrable onto a small chip area. The circuit is thus particularly suitadble for the on-chip interface.
This paper develops the piece creation of Hull-structure using PC(Personal Computer) which is from CADRA of graphic program. Large-sized shipbuilding yard was carried out on the development of CNC(Computer Numerical Control) auto cutting system used in super S/W such as AUTODEF, TRIBON. But this system needs lots of expenses and high technician, and only used in large-sized shipbuilding yard, not medium-sized and small-sized shipbuilding yard. To bring up the small and medium-sized ship building yard lacking a little competitive power. Small and medium-sized shipbuilding yard need the piece creation of Hull Structure S/W which is joined with the CADRA. Therefore the piece creation of Hull-Structure S/W is developed to joined with the CADRA of graphic S/W to create the piece to be needed on as auto cutting process using PC.
CDMA 무선 통신망 기지국의 경우 GPS를 사용한 시각동기 시스템에 전적으로 의존한다. 따라서 우리는 GPS의 예측할 수 없는 고장 또는 미국의 전략적 목적으로, 이용이 불가능할 경우를 대비하여 대체 시스템을 준비해야 한다. 본 연구에서는 정지궤도 통신위성을 이용한 시각동기 시스템을 개발하기 위한 지상 시험 시스템을 구축하였으며, 송수신 보드를 설계, 제작, 시험하였는데, 이 보드는 원자시계로부터 1PPS 신호를 수신 받으면 버퍼에 저장된 데이터를 위성 모뎀에 송신하고, 위성 모뎀으로부터 데이터가 수신되면, Universal Counter 가 지연시간을 측정하도록 1PPS를 생성하여 출력하는 기능을 수행한다.
본 논문에서는 다이나믹 주파수 스케일링 (DFS) 카운터를 사용하여 코오스, 파인 조정 기능을 갖는 CMOS 듀티 사이클 보정회로를 제시한다. DFS 카운터는 디지털-아날로그 컨버터의 비트 스위칭 글리치를 감소시키기 때문에 제안하는 CMOS 듀티 사이클 보정회로의 듀티 보정 범위를 증가시키고 지터 특성을 개선한다. 제안하는 회로는 0.18-${\mu}m$ CMOS 공정을 이용하여 설계되었다. 0.5-1.5GHz의 넓은 동작 주파수와 25-75%의 넓은 듀티 사이클 보정 범위 내에서 측정된 최대 출력 듀티 사이클 에러는 ${\pm}1.1%$이다.
본 논문에서는 $0.18{\mu}m$ triple-well CMOS 공정을 사용하여 포톤계수 방식의 $32{\times}32$ 픽셀 어레이를 갖는 CMOS ray 영상센서를 설계하였다. 설계된 영상센서의 카픽셀은 $100{\times}100\;{\mu}m2$ 면적을 가지고 있고 약 400개의 트랜지스터로 구성되어 있으며, 범프 본딩을 통해 ray 검출기와 CSA(Charge Sensitive Amplifier)의 연결을 위한 $50{\times}50{\mu}m2$의 오픈패드를 가지고 있다. 각각의 싱글픽셀 CSA에서 전압 바이어스 회로를 사용한 folded cascode CMOS OP amp 대신 레이아웃 면적을 줄이기 위하여 self biased folded cascode CMOS OP amp를 이용하였으며, 계수 모드 진입 전후에 CLK에서 발생 할 수 있는 short pulse를 제거하는 15bit LFSR 계수기 (Linear Feedback Shift Register Counter) 클럭 발생회로를 제안하였으며, 읽기 모드에서 CMOS X-ray 영상센서의 최대 전류를 줄이기 위하여 열 어드레스 디코더를 이용하여 한 열씩 읽도록 설계하였다.
본 논문에서는 CMOS 회로를 이용하여 디스플레이포트(DisplayPort)에 사용 가능한 스프레드 스펙트럼 클록 발생기(SSCG)를 제안하고 구현하였다. 스프레드 스펙트럼 클록 발생기를 1-1 MASH 시그마-델타 변조기(Sigma-delta modular)를 이용한 분수형 분주기를 사용하여 분주비를 변화시켜 확산시키는 구조를 사용하였다. MASH 1-1 시그마-델타 변조기를 사용하게 되면 회로구성이 용이해지고 면적일 줄일 수 있는 장점이 있다. 시그마 델타 변조기를 이용한 스프레드스펙트럼 생성기의 장점은 확산비율과 변조율을 시그마 델타 변조기의 입력 값을 변조하여 정확하게 조절할 수 있다는 것이다. 확산비율과 변조율은 디스플레이포트 표준 스펙에 만족되도록 설계하였고, 디스플레이포트 링크심볼클록인 270MHz/162MHz 듀얼 모드 클록에서도 만족하도록 설계하였다. 그리고 변조파형은 33KHz의 삼각파의 형태를 취하고 있고, 0.25%의 다운스프레드 스펙트럼 클록이 발생한다. 스프레드 스펙트럼 클록 발생기의 세부 설계블록들은 모두 풀커스텀 방식으로 설계하였다. 또한 0.18$\mu$m 1P-6M CMOS 공정을 사용하여 설계 및 제작되었으며, 레이아웃 된 전체 블록의 면적은 0.620mm $\times$ 0.780mm이었다. 칩 측정결과 디스플레이포트 동작기준을 잘 만족함을 보였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.