• 대한교통학회지
• /
• 제24권5호
• /
• pp.35-44
• /
• 2006

여러 나라에서 다양한 감석/가속 성능 곡선이 사용되어지고 있다. 이 성능곡선은 많은 경우에 결정론적 곡선으로서 오르막차로 설계에 사용되어지고 있다. 이 곡선은 실제 운행 중인 트럭이 표준트럭처럼 이상적인 성능을 보인다는 가정 하에 기준화되었고 또한 적용되어지고 있음을 염두 해 둘 필요가 있다. 그러나 많은 경우에 자동차의 노화 혹은 운전자의 가속등판에 대한 무관심으로 오르막화물차는 차량의 성능만큼 혹은 표준트럭의 성능만큼 주행하지 못하게 된다. 본 논문은 이러한 오르막차로에서 주행하는 화물차의 실제 주행특성을 조사하여 오르막차로설계에 사용되고 있는 오르막차로 성능곡선기울기의 확률적 변동성을 검토하였다. 이를 위해 고속도로 요금소에서 계중기를 통과한 트럭의 차종 및 모델조사를 통해 중량/마력비를 산출하였다 그리고 동일차량을 오르막차로 까지 추종하였다 오르막차로에서는 동일차량의 추종을 통해 속도를 조사하였다. 또한 그동안 사용되어졌던 각종 감속/가속 성능곡선을 이용하여 180, 200, 220 Ib/hp 의 세 가지로 구분하고 실제 이에 상응하는 관측된 85%ile 성능곡선의 특성을 비교하였다. 고속도로를 대상으로 한 오르막경사에서의 화물차 추종조사결과 실측된 감속곡선과 가속곡선은 관련기준에서 제시하는 곡선보다 성능이 떨어지는 형태를 보여주었다. 결론적으로 설계 시 기대했던 트럭의 속도를 현재의 오르막차로 시점부와 종점부에서 얻으려면 오르막차로의 시점부에서는 $16.19{\sim}67.94m$의 길이 연장이 필요하며, 오르막차로 종점부에서는 $53.12{\sim}103.24m$의 길이 연장이 필요한 것으로 나타났다.된다 하겠다.시성 그리고 안전성 면에서 아직도 확실한 성과가 나타나지 않고 있으며 특히 Hatfield 사고 이후에 정시성과 신뢰성 저하 그리고 비용증가의 문제는 앞으로 해결되어야 할 과제로 지적되었다. 미치는 것으로 확인되었다. 대구${\sim}$대전 구간의 통행수단 선택모형의 추정결과를 보면 차외시간, 차외비용, 차내시간 통행빈도, 나이(51세 이상 제외), 직업, 가구 전체의 월평균 소득이 지역 간 통행수단 선택에 중요한 영향을 미친다는 사실을 확인할 수 있었다.을 길게 하더라도 치료에 필요한 적정 수준의 체내 요오드량 감소를 달성하기 어려울 것으로 판단된다. 그러나 1주간 엄격한 저요오드식이를 시행한 군에서도 체내 요오드량의 감소가 충분히 감소하는 비율이 여전히 낮기 때문에 엄격한 저요오드식이 방법을 2주간 시행하는 것이 더바람직하리라 기대된다.. 시험관 섭취율에서 $[^{18}F]$FLT는 시간이 지남에 따라 증가하는 양상을 보였고 생체분포 실험에서 주사 후 120분에서 tumor/blood, tumor/muscle, tumor/brain의 비율은 $1.61{\pm}0.34,\;1.70{pm}0.30,\;9.33{\pm}2.22$를 나타내었다. 또한, 양전자방출단층촬영 결과 종양에 국소화된 영상을 얻었다. 결론: $[^{18}F]$FLT의 종양세포 섭취는 정상 뇌에 비해 월등히 높게 나타났으며, 양전자방출단층 촬영 결과는 뇌종양 진단을 위한 방사성의약품으로 유용하게 이용될 수 있을 것으로 기대된다.$[^{11}C]raclopride$의 수용체 결합능의 변화는

• 한국도로학회논문집
• /
• 제16권2호
• /
• pp.53-59
• /
• 2014

PURPOSES : This study estimated an asphalt pavement internal behavior under uphill lanes considering reducing speed of heavy truck on uphill slope. METHODS : Truck performance curve which has been adapted to "Korea Highway Capacity Manual" was analyzed. And asphalt pavement internal behaviors were estimated with Multi-layered elastic analysis using KPRP(Korea Pavement Research Program) dynamic modulus prediction equations. RESULTS : As a result, it is shown that when the standard truck drives 2.0 km at a speed of 80 km/h in 8% climbing slope, it's speed reduced to 25.4 km/h, at same time frequency in asphalt layer decrease to 67.2% and it's dynamic modulus degrades to 30.9%. Based on these results, internal behavior as decreasing vehicle speed on uphill lanes were estimated. CONCLUSIONS : From the results of Multi-layered elastic analysis, internal behavior showed that when the standard truck drives 2.0 km at a speed of 80 km/h in 8% slope on uphill lanes, vertical strain was increased to 44.4% at the bottom of surface course, and lateral tensile strain was increased to 20.5% at the bottom of base course.

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.1-9
• /
• 2015

PURPOSES : The purpose of this study is to revise the weight to power ratio of the representative truck in S. Korea. So far, S. Korea has been using the unit lb/hp, and the construction machines were not considered in the evaluation of the performance of trucks. METHODS : This study was performed to recommend the use of ISO system of units, and to analyze the weight to power ratios of the representative trucks in S. Korea, including the dump trucks, concrete mixer trucks, and asphalt and concrete diffusers. RESULTS: From this study, the 85 percentile value of the weight to power ratio of the trucks in S. Korea's was found to be 103.6 kg/kw. CONCLUSIONS : The performance standard for the representative truck has to be increased upward, considering the travel pattern of the dump trucks, concrete mixers, and asphalt and concrete diffuser trucks, travel distances, narrow area (work zone) of operation, and the saving in construction budget for climbing lane. Based on this study, the weight to power ratio of the representative truck in S. Korea could possibly be revised to 100~110 kg/kW.

• 운동영양학회지
• /
• 제25권1호
• /
• pp.23-29
• /
• 2021

[Purpose] This preliminary study aimed to develop a regression model to estimate the non-exercise activity thermogenesis (NEAT) of Korean adults using various easy-to-measure dependent variables. [Methods] NEAT was measured in 71 healthy adults (male n = 29; female n = 42). Statistical analysis was performed to develop a NEAT estimation regression model using the stepwise regression method. [Results] We confirmed that age^A, weight^B, heart rate (HR)_average^C, weight × HR_average^D, weight × HR_sum^E, systolic blood pressure (SBP) × HR_rest^F, fat mass ÷ height^2G, gender × HR_average^H, and gender × weight × HR_sum^I were important variables in various NEAT activity regression models. There was no significant difference between the measured NEAT values obtained using a metabolic gas analyzer and the predicted NEAT. [Conclusion] This preliminary study developed a regression model to estimate the NEAT in healthy Korean adults. The regression model was as follows: sitting = 1.431 - 0.013 × (A) + 0.00014 × (D) - 0.00005 × (F) + 0.006 × (H); leg jiggling = 1.102 - 0.011 × (A) + 0.013 × (B) + 0.005 × (H); standing = 1.713 - 0.013 × (A) + 0.0000017 × (I); 4.5 km/h walking = 0.864 + 0.035 × (B) + 0.0000041 × (E); 6.0 km/h walking = 4.029 - 0.024 × (C) + 0.00071 × (D); climbing up 1 stair = 1.308 - 0.016 × (A) + 0.00035 × (D) - 0.000085 × (F) - 0.098 × (G); and climbing up 2 stairs = 1.442 - 0.023 × (A) - 0.000093 × (F) - 0.121 × (G) + 0.0000624 × (E).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.55-56
• /
• 2006

This paper describes a new concept of the robot that can climb on the vertical plane. The engineering design problem of the main structure is presented and the experimental results regarding a new mechanism of climbing on the vertical wall are discussed. The locomotive motion of the robot is realized by using a series chain of two caterpillar wheels on which 24-suction pads are installed. White each caterpillar wheel rotates on the vertical plane surface, the vacuum pads are activated in sequence based on the sequential opening by specially designed mechanical valves. The detail design feature of the valve is also described in this paper. The overall size of the robot is around 460 mm in width and length, respectively, and 200 mm in height. Its mass is slightly over 14 kg. The main mechanical structure of the robot consists of driving motors, vacuum caterpillar system, steering part, vacuum pump and battery. The performance of the robot is verified on the vertical wall.

• 한국산업정보학회논문지
• /
• 제20권6호
• /
• pp.57-65
• /
• 2015

제조최적화 문제는 비선형 형태의 설계변수로 표시되며, 다양하고 복잡한 제약들을 만족하는 조건하에서 최적해를 구하는 문제이다. 이러한 제조최적화 문제 해결을 위하여 본 연구에서는 혼합형접근법을 제안한다. 제안된 혼합형접근법은 기존의 유전알고리즘(Genetic algorithm: GA)과 쿠쿠탐색(Cuckoo search: CS) 및 언덕오르기법(Hill climbing method: HCM)을 혼합한 형태로 구성된다. 제안된 혼합형접근법에서 GA는 전역적탐색(Global search)를 위해 사용되고, CS는 GA탐색과정에서 발생하는 단점을 개선하기 위해 적용되고, 마지막으로 HCM은 GA와 CS 탐색 이후의 수렴된 지역을 정밀하게 탐색하기 위한 지역적탐색(Local search)을 위해 적용된다. 실험분석에서는 다양한 형태의 제조최적화 문제가 제시되어 본 연구에서 제안된 혼합형접근법와 기존접근법들의 수행도를 각각 비교, 분석하였으며, 그 결과는 본 연구에서 제안한 혼합형접근법의 수행도가 기존접근법들의 수행도보다 더 우수한 것을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.314-319
• /
• 2005

When a robot navigates in the real environment, it frequently meets various environments that can be expressed by simple geometrical shapes such as fiat floor, uneven floor, floor with obstacles, slopes, concave or convex corners, etc. Among them, the convex corner composed of two plain surfaces is the most difficult one for the robot to negotiate. In this paper, we propose a gait planning algorithm to help the robot overcome the convex environment. The trajectory of the body is derived from the maximum distance between the edge boundary of the corner and the bottom of the robot when it travels in the convex environment. Additionally, we find the relation between kinematical structure of the robot and its ability of avoiding collision. The relation is realized by considering the workspace and the best posture of the robot in the convex structure. To provide necessary information for the algorithm, we use an IR sensor attached in the leg of the robot to perceive the convex environment. The validity of the gait planning algorithm is verified through simulations and the performance is demonstrated using a quadruped walking robot, called "MRWALLSPECT III"( Multifunctional Robot for WALL inSPECTion version 3).

• 융복합기술연구소 논문집
• /
• 제5권1호
• /
• pp.19-22
• /
• 2015

Human powered aircraft (HPA) is an airplane that uses only human power for its propulsion. The human power as a power resource and an engine produce the available power that is very crucial to the success of the HPA. In the present paper, the human power characteristics for completing the mission profile are discussed focusing on the take-off and climbing performance. The mission profile is designed by using an athlete's power generation. It is believed that present analysis can be helpful for the mission profile design and athletes exercise program development for the HPA competitions.

• 한국경영과학회지
• /
• 제29권4호
• /
• pp.117-134
• /
• 2004

This study suggests a data driven optimization approach, which simulates the models of human learning processes from cognitive sciences. It shows how the human learning processes can be simulated and applied to solving combinatorial optimization problems. The main advantage of using this method is in applying it into problems, which are very difficult to simulate. 'Undecidable' problems are considered as best possible application areas for this suggested approach. The concept of an 'undecidable' problem is redefined. The learning models in human learning and decision-making related to combinatorial optimization in cognitive and neural sciences are designed, simulated, and implemented to solve an optimization problem. We call this approach 'SLO : simulated learning for optimization.' Two different versions of SLO have been designed: SLO with position & link matrix, and SLO with decomposition algorithm. The methods are tested for traveling salespersons problems to show how these approaches derive new solution empirically. The tests show that simulated learning for optimization produces new solutions with better performance empirically. Its performance, compared to other hill-climbing type methods, is relatively good.

• 산업기술연구
• /
• 제27권B호
• /
• pp.37-42
• /
• 2007

A mobile ad hoc network (MANET) is a kind of wireless ad hoc network. It is a self-configuring network of mobile nodes connected by wireless links. Infostation is a lower cost and low power system that provides very high bit rate with limited coverage. In this study, we propose search and rescue system that combines MANET of climbers with Infostations. A climber shares location information of climbers with other climbers while climbing, and delivers the information to Infostations. This system is an intermittent network due to the mobility of nodes. From the system, we can track the locations of missing climbers. Ultimately, proposed system achieves low cost and reduces memory requirement using Infestations. We also analyze the performance of the proposed system by simulation. From the performance analysis results, we expect that the proposed system will be very useful to early detect climbers' locations in emergency situations in Korea mountain areas.