• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.895-902
• /
• 2007

Rotating machinery has two typical faults with clearance, one is partial rub and the other is looseness. Due to these faults, non-linear and non-stationary signals are occurred. Therefore, time-frequency analysis is necessary for exact fault diagnosis of rotating machinery. In this paper newly developed time-frequency analysis method, HHT(Hilbert-Huang Transform) is applied to fault diagnosis and compared with other method of FFT, SFFT and CWT. The results show that HHT can represent better resolution than any other method. Consequently, the faults of rotating machinery are diagnosed efficiently by using HHT.

• Journal of the Korean Society of Costume
• /
• v.51 no.2
• /
• pp.53-64
• /
• 2001

The purpose of this study is to create the program for efficient inventory management and reduction, investigating the present conditions and factors of the inventory throughout current apparel industry. The research method applied in this study is to survey 92 domestic companies which were randomly selected with respect to the kinds of goods produced : men′s wear, women′s wear, and unisex wear. The research can be summarized as follows : 1. The seasonal stock rate of current apparel industry was 28.75%, and the rate of men′s wear companies was higher than that of women′s and unisex wear companies. 19.43% of stock cost reflection rate was applied, and the stack cost of men′s and women′s wear companies was higher than that of unisex wear companies. 2. Periodic bargain sale was the most frequently used way of stock clearance, and "uniform price sale"and outlet stores were the second and the third irrespectively. Unisex wear companies appeared to be more enthusiastic in stock clearance than the companies belonging to the other two categories. The main places for the stock clearance were department stores, outlet stores and enterprises specialized in the stock clearance. 3. QR production was proved to be the most commonly adjusted method of stock reduction, and the emphasis on development of new design and the utilization of stock management system through computer network were the next, While unisex wear companies had established the positive policies, men′s wear companies took lukewarm altitudes in every aspect. The companies selling on an order were 18.64%, and unisex wear companies showed the higher rate. The lead-time after QR production was 10.91 days, and it seemed to take more time for men′s wear companies than for women′s and unisex wear companies. The rate of the chance in stock was proved to decrease by 12.94%, and there was found no meaningful difference among the three categories of apparel companies.

• The Korean Journal of Nuclear Medicine
• /
• v.23 no.1
• /
• pp.49-54
• /
• 1989

Many previously described nuclear medicine procedures to assess glomerular filtration rate (GFR) required numerous blood samples obtained over a period of several hours to determine plasma concentrations of the injected radiopharmaceuticals. And other indirect methods of determining renal clearance have some problems due to individual variations in volume of distribution of the radionuclides used. Rescently reported Jackson's method have the great advantages that is a direct measurement method requiring less than 40 min of imaging time and single blood sampling. And it correctly accounts for individual variations in volume of distribution of the radiopharmaceuticals and can be done with routine renal scintrgraphy. We measured $^{99m}Tc-DTPA$ renal clearance with Jackson's method during the routine $^{99m}Tc-DTPA$ renal scintigraphy in 63 patients admitted to department of internal medicine in SNUH. In 23 cases among 63 patients creatinine clearence was accounted simultaneously. The range of $Cl_{DPDA}$ was from 19.9 ml/min to 170 ml/min and the correlation of $Cl_{DPDA}$ and creatinine clearance was discribed by Y=16.2570+0.7852 X($X=Cl_{DTPA}$ Y=creatinine clearance). And the correlation coefficient r was 0.88. We concluded that $^{99m}Tc-DTPA$ renal clearance measurement with Jackson's method was clinically useful to account GFR that can be done with routine $^{99m}Tc-DTPA$ renal scintigraphy simultaneously.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.20 no.1
• /
• pp.53-62
• /
• 1990

This experiment was performed to clarify the effects of /sup 60/Co gamma irradiation on secretory function, amylase activity and contents of nucleic acids of parotid gland in rat. Experimental animals were divided into 6th hours, 3rd, 7th, 14th and 28th days after irradiation and control. The experimental animals are singly irradiated with 20Gy (2,000rad) through protective lead block. Secretory function of parotid gland was evaluted by uptake and clearance of /sup 99m/TcO₄. /sup 99m/TcO₄. 0.2μ ci/gm, was injected into peritonium in uptake groups. Rats were sacrified with cervical dislocation after 30 minutes and gland was excised. In the clearance group. pilocarpine nitrate (8㎎/㎏) was intraperitoneally injected at 30 minutes after /sup 99m/TcO₄ injection and rats were sacrified 30 minutes after pilocarpine injection. Radioactivity of excised parotid gland was measured by using of gamma counter and stimulation-secretion coefficients, uptake radioactivity divided by clearance radioactivity, was calculated. Amylase activity and contents of DNA and RNA were determined by spectrophotometry. The results obtained were as follows: 1. In the uptake test, the radioactivity of /sup 99m/TcO₄ per unit weight increase in experimental group except 6th hours group, compared with control groups and showed a peak at 3rd days after irradiation. 2. In the clearance test, the radioactivity of /sup 99m/cO₄per unit weight rose to a peak at 3rd days after irradiation and gradually recovered thereafter. 3. Stimulation-secretion coefficient of parotid gland decreased at 6th hours, 3rd and 7th days after irradiation, and gradually increased. 4. Amylase activity of parotid gland decreased in 3rd and 7th days group, and especially lowest in 3rd days after irradiation. 5. The contents of DNA showed no definite difference in all the experimental groups, but RNA was seemed to decrease with time after irradiation.

• Tribology and Lubricants
• /
• v.38 no.5
• /
• pp.205-212
• /
• 2022

This paper presents experimental measurements of the structural characteristics of a two-pad beam-type gas foil journal bearing and its rotordynamic performance for a high-speed motor-driven turbocompressor. The test bearing had two top foils and two beam foils, each with an arc length of ~180°. Each beam foil was etched to obtain 40 beams with six geometries of different lengths and widths. The insertion of beam foils into the bearing housing produces equivalent beam heights. The structural tests of the bearing with a non-rotating journal revealed a smaller bearing clearance and larger structural stiffness for the load-on-pad configuration than for the load-between-pads configuration. Rotordynamic performance measurements during driving tests up to 100 krpm demonstrated synchronous vibrations and subsynchronous vibrations with large amplitudes. The test was repeated after inserting the shim between the top foil and beam foil to reduce the bearing radial clearance. The reduced bearing clearance resulted in a reduction in the peak amplitude of the synchronous vibrations and an increase in the speed at which the peak amplitude occurred. In addition, the onset speed and amplitude of the subsynchronous vibrations were dramatically increased and diminished, respectively. The rotor coast-down tests at 100 krpm show that the reduction in the bearing clearance extends the time to rotor stop, thus implying an improvement in hydrodynamic pressure generation and a reduction in bearing frictional torque.

• Journal of Korea Port Economic Association
• /
• v.21 no.3
• /
• pp.83-113
• /
• 2005

In this study, for purpose of searching for measures to lower the logistics costs which is one of the most difficulties for the small-medium sized manufacturers in Pusan and Kimhae, those manufacturers were surveyed with questionnaire about the facts in the export logistics costs, difficulties related to the costs, and measures they thought for lowering the cost. Taking account of findings from the survey, the comprehensive measures of saving the export logistics costs were to be proposed. In the surveyed manufacturers, the problems they thought over export logistics costs lied in short logistics information and transportation-related difficulties in cargo and distribution, insufficient standardization in packaging and the shortage of material handling equipments in unloading. In transportation, frequent non-fulfillment of in-time shipment, cost increase including over consumption of transportation time due to traffic jam, and the biased heavy use of inland transportation were pointed out as problems. In customs clearance, logistics information, and marine insurance, addressed were complexity in custom clearance and bonded transportation procedures, and the shortage of software and hardware to construct logistics information system.

• Journal of the Korean Society of Systems Engineering
• /
• v.19 no.1
• /
• pp.1-13
• /
• 2023

Transportation of goods by rail in border areas requires considerable time, money, and human resources. Therefore, in this study, a blockchain-based non-stop passing system is proposed to solve this problem. In this study, each transit station and train are designated as one network node, and the corresponding node participates in the blockchain network to record and verify data. In the process, we will design a blockchain network using Docker and design a network interface. Without changing the data and information generated in the existing legacy clearance system, it is possible to configure a blockchain network to ensure the integrity and reliability of the data and to minimize the consumption of time and human resources. The railroad non-stop passing system aims to change the existing legacy system to a blockchain-based non-stop passing system.

• 한국ITS학회:학술대회논문집
• /
• 2008.11a
• /
• pp.109-113
• /
• 2008

• The Journal of the Korean dental association
• /
• v.15 no.12
• /
• pp.999-1003
• /
• 1977

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.2
• /
• pp.153-162
• /
• 2011

The demands of complicated data communications have issued a new challenge to port logistics systems. Customers expect ports to handle their generated administrative data while a vessel is docked in a port. One port logistics system, known as the Vessel Clearance Process (VCP), manages large numbers of documents related to port of entry. In the VCP, information flows through many organizations such as the port authority, shipping agents, marine offices, immigration offices, and others. Therefore, for effective management of the Business Process (BP) of the VCP, a standardized method of BP modeling is essential, especially in heterogeneous system environments. In a port, according to port policy, terms and data are sued that are similar to but different from those of other logistics partners, which hinders standardized modeling of the BP. In order to avoid tedious and time-consuming document customization work, more convenient modeling of BP for VCP is essential. This paper proposes an ontology-based process similarity measurement to assist designer for process modeling in port domain, especially VCP. We expect that this methodology will use convenient and quick modeling of port business processes.