• Tribology and Lubricants
• /
• v.20 no.4
• /
• pp.209-217
• /
• 2004

Lubrication characteristics between a cylinder block and a valve plate for high speed bent-axis type hydraulic pump play an important role in volumetric efficiency and durability of pump. In this paper, a finite element method is presented for the computation of the pressure distribution between a cylinder block and a valve plate for high speed bent-axis type hydraulic pump. Also, a Runge-Kutta method is applied to simulate the cylinder block dynamics of three-degrees of freedom motion. From the results of computation, we can draw two major conclusions. One is related to the fluid film characteristics between a cylinder block and a valve plate and the other is related to the average leakage that is determined by the pressure gradient and the clearance near the discharge port. The numerical results of cylinder block dynamics were compared with the experimental results using eddy-current type gap sensors those are fixed at a pump housing.

• Transactions of Materials Processing
• /
• v.21 no.3
• /
• pp.186-194
• /
• 2012

Hot stamping is a forming method that offers various advantages such as superior mechanical properties, good formability, and very small springback. However, relatively large-sized parts, such as front pillars, exhibit poor formability when hot stamped due to the limited material flow and thickness reduction imparted by the process. This reduction in thickness can also lead to cracks. One of the reasons is the relatively high friction between the sheet and the die. In this study, in order to obtain the optimal conditions for hot stamping of front pillars, various process parameters were studied and analyzed using the sheet forming software, J-STAMP. The effects of various parameters such as the die structure, blank shape, blank holding force, punch speed, clearance(upper and lower dies) and distance block were analyzed and compared.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.4
• /
• pp.26-33
• /
• 2002

One characteristic of Fine-Blanking is that the size and the direction of stress and strain are very complex in the plastic flow according to the condition of blanking. Especially, they are affected by the clearance of punch and die, by the force of blanking holder and by the force of counter punch. The purpose of this research is to how the deformation behavior in shear zone more clearly, based on Green & Cauch's large deformation theory. The deformation behavior and cracks were investigated in each step of shear, according to punch penetration increase, the use of V-indenter ring and the hardness of materials. This research found that the transforming behavior was the same as pure discretion and the cracks could be prevented when hardness is low.

• Journal of Pharmaceutical Investigation
• /
• v.10 no.3
• /
• pp.5-13
• /
• 1980

A study on the diuretic action of Siegesbeckiae herba in dogs was made using a clearance technique with ethanol extract. Siegesbeckiae herba ethanol extract (SGEE) administered intravenously in doses 6.0 and 60.0mg/kg elicited diuresis and an increase in sodium and potassium excretion, and it simultaneously produced a decrease in the reabsorption rate of sodium and potassium in renal tubules. Neither renal plasma flow nor glomerular filtration rate changed significantly. SGEE, when infused directly into a renal artery in doses of 0.5 and 1.5mg/kg min, exhibited identical results to the intravenous responses confined only to the infused kidney. The above observations lead to the suggestion that SGEE elicits diuresis in dogs by decreasing the reabsorption rates of sodium and potassium in renal tubles.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.11
• /
• pp.78-83
• /
• 2010

Since a tower crane is too high for a worker to ascend and by the wind in the high altitude, the possibility of a safety accident is very high, a lift assist is used. In this study, the hydraulic fall prevention device using the pressure generation device by Seok, et al. was developed. For this, the effects on the fall prevention performances of factors such as gear clearance, oil viscosity, rotative velocity and so on were evaluated by the analysis of fluid flow using FEM and the prototype was producted and a function test was performed.

• Journal of Power System Engineering
• /
• v.11 no.2
• /
• pp.38-43
• /
• 2007

전자기적으로 지지되는 임펠러를 가진 원심 혈액 펌프는 기존의 심장 펌프에 비해 많은 장점을 가지고 있지만, BVAD의 틈새에서 발생하는 유체 동역학적인 문제는 여전히 규명이 되지 않은 상태이다. 본 연구에서는 BVAD의 틈새에서 발생하는 혈액외상(blood trauma)의 예측에 대한 연구에 중점을 두고 있다. 일반적으로 원심 혈액 펌프의 설계를 위해 전자기적으로 지지되는 원심 혈액 펌프의 디스크 틈새에서 발생하는 혈액의 손상을 평가하는 방법으로 CFD를 이용한 방법이 널리 이용되고 있다. 따라서, 본 연구에서는 초기 원심 혈액 펌프의 설계 단계에서 펌프의 특성을 평가하기 위하여, 축 방향 틈새의 영향과 회전수 변화에 따른 누수경로의 전단 응력의 크기 평가를 CFD를 사용하여 해석하여 보았다.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.54
• /
• pp.45-80
• /
• 2012

Since the 9.11 terror attack, the event which caused supply chain disruption, supply chain security has become more important than ever before. With this as a momentum, a customs supply chain security paradigm emerged intended to guarantee secure flow of cargo across boarder. Under this circumstances Incoterms(R) 2010 rules have allocated obligations between the buyer and seller to obtain or to render assistances in obtaining security clearances. Thus, security related obligations such as providing advance manifest information is the mandatory requirements for any export and import. The impact on the seller and buyer of security related obligations under the Incoterms(R) 2010 rules environment is obvious. Assistance to provide the security information in advance has become indispensable obligations to the seller and buyer. As such assistances is at the cost and risk of the party responsible for the clearances of the goods, the choice of recognised partner and compliance with the relevant security program, in order to enjoy the relevant benefits, becomes paramount.

• Tribology and Lubricants
• /
• v.19 no.5
• /
• pp.292-297
• /
• 2003

The fundamental fluid mechanics associated with the rotation of a smooth plane disk enclosed within a cylindrical chamber have been studied experimentally. In order to acquire systematic information pertinent to this problem torque and friction loss data were obtained over a wide range of disk Reynolds numbers for axial clearance-disk radius ratio H/R from 0.025 to 0.2 and radial tip gap-disk radius ratio s/R from 0.021 to 0.105. Loss analysis of hard disk drive (HDD) is presented to describe the contribution of windage loss of a rotating disk. The minimum loss form factor of HDD can be obtained from this analysis at each operation conditions.

• The KSFM Journal of Fluid Machinery
• /
• v.5 no.1 s.14
• /
• pp.27-32
• /
• 2002

The turbopump inducer cavitation is very important for the success of a liquid rocket engine. In this study, the performance test and cavitation performance test were carried out at various rotational speeds with two inducers of different diameter. The rotational speed was varied by 4000, 6000, and 8000 rpm, and the size effect was tested for the normal inducer and twice-enlarged one. The hydraulic performance results showed that the similarity was satisfied over the entire test range of the present study. The blade thickness effect was examined and showed that the increased blade thickness resulted in decreased efficiency and worse cavitation performance for the large tip clearance. The cavitation performance test results showed that the breakdown NPSH increased as the flow coefficient, and was not affected by the rotational speed.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.229-234
• /
• 2001

The turbopump inducer cavitation is very important for the success of a Liquid rocket engine. In this study the performance test and cavitation performance test were carried out at various rotational speed with two different diameter inducers. The rotational speed were varied 4000, 6000, 8000 rpm and the variation to the diameter of an inducer were taken as design size and 2 times enlarged size. The major results of the present study were as follows. 1. The hydraulic performance results showed that the similarity was met over the entire test range of the present study. 2. The blade thickness effect was examined and showed that the increased blade thickness resulted in decreased efficiency and worse cavitation performance for large tip clearance. 3. The cavitation performance test results showed that the breakdown NPSH increases as the flow coefficient and does not affected by the rotational speed.