• 한국유체기계학회 논문집
• /
• 제2권4호
• /
• pp.9-15
• /
• 1999

A screw-type centrifugal pump was manufactured to carry primarily solids and its impeller had a wide flow passage. However, there was an effect on the flow passage shape on delay of the choke due to entrained air not being clarified yet. Moreover, because its impeller has a particular shape, only few studies have tried to clarify the pump performance and details of internal flow pattern of that pump. For this reason, we carried out the pump performance experiment under air-water two-phase flow condition with different impeller tip clearances, pump rotational speeds and void fractions by using a small screw-type centrifugal pump designed to acquire basic data. In a general centrifugal pump, it was reported that there was a loss of pump head from single-phase flow to the choke due to air entrainment near the best efficiency point being large. However, the loss near the best efficient point in a screw-type centrifugal pump became less than that in a general centrifugal pump.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제11권3호
• /
• pp.132-139
• /
• 2003

The effects of casing shapes on the performance and the interaction between an impeller and a casing in a small-sized centrifugal compressor are investigated. Especially, numerical analyses are conducted for the centrifugal compressor with both a circular casing and a volute one. The optimum design for each element (i.e., impeller, diffuser and casing) is important to develop an efficient and compact compressor using alternative refrigerant as working fluids. Typical rotating speed of the compressor is in the range of 40,000∼45,000 rpm. The impeller has backswept blades due to tip clearance and a vane diffuser has wedge type. In order to predict the flow pattern inside an entire impeller, vaneless diffuser and casing, calculations with multiple frames of reference method between the rotating and stationery parts of the domain are carried out. For computations of compressible turbulent flow fields, the continuity and time-averaged Navier-Stokes equations are employed. To evaluate the performance of two types of casings, the static pressure recovery and loss coefficients are obtained for various flow rates. Also, static pressure distributions around casings are studied for different casing shapes, which are very important to predict the distribution of radial load. The static pressure around the casing and pressure difference between the inlet and outlet of the compressor are measured for the circular casing.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.861-866
• /
• 2004

A numerical flow analysis has been performed on the partial admission turbine of KARI turbopump to support the aerodynamic and structural dynamic assessments. The flow-field in a partial admission turbine is essentially three dimensional and unsteady because of a tip clearance and a finite number of nozzles. Therefore the mixing plane method is generally not appropriate. To avoid heavy computational load due to an unsteady three dimensional calculation, a frozen rotor method was implemented in steady calculation. It adopted a rotating frame in the grid block of a rotor blade by adding some source terms in governing equations. Its results were compared with a mixing plane method. The frozen rotor method can detect the variation of flow-field dependent upon the blade's circumferential position relative to the nozzle. It gives a idea of wake loss mechanism starting from the lip of a nozzle. This wake loss was assumed to be one of the most difficult issues in turbine designers. Thus, the frozen rotor approach has proven to be an efficient and robust tool in design of a partial admission turbine.

• 대한기계학회논문집B
• /
• 제21권10호
• /
• pp.1339-1349
• /
• 1997

A numerical method of calculating the performance of a scroll compressor for refrigerant R-22 and R-134a is presented in this paper. A series of involute curves are employed for the scroll wrap design and the compression volume is investigated geometrically. The radial leakage flow rate through tip clearance is calculated by the two-dimensional compressible flow. On the basis of the results, quasi one-dimensional leakage modeling can be applied to the performance analysis of a scroll compressor, more effectively. Furthermore, the heat transfer effect between scroll wrap and working fluid in compression chamber is considered for the performance analysis. As the results of this study, the effects of the radial and tangential leakage flow rate and heat transfer on the scroll compressor performance are derived precisely. These results may provide the guideline for the design and development of a real scroll compressor.

• 대한기관식도과학회:학술대회논문집
• /
• 대한기관식도과학회 1982년도 제16차 학술대회연제순서 및 초록
• /
• pp.17.1-17
• /
• 1982

1965년 Rosenberg등은 platinum electrode가 platinum 복합물을 형성함으로써 E-coli의 세포분열과 성장을 억제할 뿐아니라 항암작용도 갖고 있다는 보고를 하였으며 그 후 Welsch (1971), Speer (1972), Rossof(1972), Hill (1974), 그리고 Wittes등(1975)에 의하여 동물 및 임상실험을 통하여 Cis-platinum이 악성종양 특히 두경부악성종양에 탁월한 효과가 있다는 것이 밝혀짐에 따라서 Cis-platinum은 단독투여제 또는 Bleomyun, MTX등 다른 항암제와 함께 병용투여제로써 각광을 받게 되었다. 그러나 Cis-platinum은 항암효과이외에 때때로 내이에 영향을 미쳐 회화영역이상의 고주파에서 청력장애를 초래할 뿐만아니라 renal tubule에도 불가역적인 병변을 초래 할 수 있다는 보고들이 있어서 우수한 항암효과에 도 불구하고 임상에서 사용제한을 받는 경우가 많다. 특히 청력장애에 대하여는 Kohonen등(1965), Stadnacki등(1974)이 guinea pig에서 Cis-platinum을 투여한 후에 와우각의 기저부에 중독작용을 보고한 이래 많은 연구가 있었으나 사람에서의 이 중독작용은 Piel(1974)과 Hong등(1979)의 보고등을 찾아볼 수 있을 정도이다. 이에 저자들은 1979년 7월부터 1982년 3월까지 2년 6개월간 두경부악성종양으로 이비인후과에 입원하였던 환자중 30례에서 Cis-platinum의 투여전과 투여후의 청력상을 비교해 이중독증의 여부와 그 정도를 규명하고 그 결과를 임상적적응에 이용하고저 본 검사를 시행하여 다음과 같은 결론을 얻었다. 1) Cis-platinum 투여전과 투여후 pure tone average, 4000Hz와 8000Hz의 hearing threshold, speech reception threshold, PB score, SISI를 측정한 결과 변화는 볼 수 없었다. 2)Cis-platinum총 투여량에 따른 청력상에도 변화가 없었다. 3) 투여전에 전음성난청과 감음성난청이 있었던 환자에게 Cis-platinum을 투여한 후의 청력상을 투여전에 청력이 정상이었던 환자와 비교한 결과 차이가 없었다. 4) Cis-platinum투여로 인한 혈색소, 백혈구수, 혈소판수는 변화가 없었다. 5) Creatinine Clearance, Creatinine, Uric acid의 변화를 본 결과 Cis-platinum 투여후에 변화는 없었으나 100mg을 1 회투여하였던 한 환자에게서 creatine clearance가 25ml/min로써 신중독증을 나타냈다. 6) Cis-platinum 투여시 hydration에 따른 전해질 특히 혈청내의 $K^{+}$치를 측정한 결과 투여전과 차이가 없었다. 7) 이상의 결과로 볼때 Cis-platinum 사용으로 인한 이중독증은 신장기능이 정상일때는 충분한 hydration으로써 예방이 가능하며 동시에 금기로 알려져왔던 감음성난청이 있는 두경부악성종양환자에서도 세심한 주의하에 적절히 사용한다면 좋은 결과를 얻을 수 있을 것으로 사려된다.

• Tribology and Lubricants
• /
• 제18권4호
• /
• pp.291-298
• /
• 2002

In this study, a numerical analysis f3r the piston secondary dynamics and lubrication characteristics of small refrigeration reciprocating compressors is presented. In general, the length of cylinder in this class of compressors is shortened to diminish the frictional losses of the piston-cylinder system. So, the contacting length between piston and cylinder wall is in variable with the rotating crank angle around the BDC of the reciprocating piston. In the problem formulation of the piston dynamics, the change in bearing length of the piston and all corresponding forces and moments are considered in order to determine the piston trajectory, velocity and acceleration at each step. A Newton-Raphson procedure was employed in solving the secondary dynamic equations of the piston. The developed computer program can be used to calculate the entire piston trajectory and the hydrodynamic forces and moments as functions of crank angle under compressor running conditions. The results explored the effects of the radial clearance, lubricant viscosity, and pin location on the stability of the piston, the oil leakage, and friction losses.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.411-412
• /
• 2002

Piston-cylinder system are widely used in power engineering applications. In reciprocating refrigeration compressors, where extremely low friction losses are required, ringless pistons are being used to diminish the friction between piston rings and cylinder wall. Since the ringless piston has the freedom of lateral motion there is a potential danger that it will occasionally hit the cylinder wall while moving up and down along it's axis. A good design must therefore provide a smooth and stable reciprocating motion of the piston and ensure that the fluid film separating the piston from the cylinder wall is maintained all times. And the compromise between refrigerant gas leakage through the piston-cylinder clearance and the friction losses is required utilizing a dynamic analysis of the secondary motion for the high efficiency compressor. To this end, the computer program is developed for calculating the entire piston trajectory and the lubrication characteristics as functions of crank angle under compressor running conditions. The results explored the effects of some design parameters and operating conditions on the stability of the piston, the oil leakage, and friction losses.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.95-96
• /
• 2002

The operation of proceeding bearing in the conditions of misaligned axis of proceeding and bush leads to the load concentration on the bearing edges causing further mixed lubrication conditions, unstable operation and intensive wear of mating parts. For the design process of proceeding bearing the knowledge of static characteristics determined from the oil film pressure and temperature distribution is very important. For the 3-lobe proceeding bearing, the pressure, temperature and viscosity fields, load capacity, minimum oil film thickness, power loss, oil flow and maximum oil film temperature have been determined by iterative solution of the Reynolds', energy and viscosity equations. The paper introduces the results of theoretical investigations of static characteristics of 3-lobe proceeding bearing operating at misaligned axis of proceeding and bush. An effect of misalignment ratio, length to diameter ratio of the proceeding bearing, the lobe clearance ratio on the static characteristics was investigated. Laminar, adiabatic model of oil film for the solution of Reynolds, energy and viscosity equations was applied.

• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.39-49
• /
• 2000

This paper presents the modeling approach that can predict transient behavior of rotary compressor. Mass and energy conservation laws are applied to the control volume, real gas state equation is used to obtain thermodynamic properties of refrigerant. The valve equation is solved to analyze discharge process also. Dynamic analysis of vane and roller is carried out to gain friction work. From the above modeling, the performance of rotary compressor with radial clearance and friction loss is investigated numerically. The performance of each refrigerant is estimated, respectively by applying R12, R134a, and R290/ R600a mixture.

• 한국군사과학기술학회지
• /
• 제14권5호
• /
• pp.781-787
• /
• 2011

Mine countermeasure missions(MCMs) may induce the loss of human and ship because of the covert of mine. In recent years, unmanned underwater vehicles(UUVs) have emerged as viable technical solution for conductimg underwater search, surveillance, and clearance operations in support of mine countermeasure missions because of her autonomy and long time endurance capability. This paper introduces a technical approach to mine countermeasure mission effectiveness analysis and presents some simulation-based analysis results for engineering of the UUV system definition which could be support analysis of alternatives for system definition and design.