• 한국해양공학회지
• /
• 제17권3호
• /
• pp.52-56
• /
• 2003

This study investigates the photoelectrochemical behavior of STS304 steel with TiO2 thin films coating, applied by sol-gel mehod, for the purpose of cathodic photoprotection of the steel corrosion. One time TiO2-coated STS304 steel, adapted with two kinds of TiO2 sol solution, has the most dominant photopotential abilities, which was -200mV vs. SCE and -500mV vs. SCE under illumination with 40 W fluorescent lamp, respectively. That had yielded more negative values than the corrosion potential of the bare metal(-130mv vs.SCE). The bleaching of TCE was confirmed on TiO2-coated STS304 steel under UV-illumination with 20W Black-light. This Study concluded that Ti02-coated STS304 exhibited both a cathodic photoprotection effect against corrosion and a photocatalytic self-cleaning effect.

• 한국통신학회논문지
• /
• 제7권2호
• /
• pp.59-65
• /
• 1982

本實驗에 파이퍼-폴리시(piper-polish)法으로 만든 單結晶에 Sb와 In을 이온衝激시킨 스포트에 대하여 熱剌激電流를 測定하였다. Sb와 In을 각각 衝激시켜 熱剌激電流를 測定한 결과 중첩된 피이크가 觀察되었는데 이를 서멀 클리닝(thermal cleaning)法으로 分離하여 147K에서 0.25eV와 0.31eV의 活性에너지를 얻었다. 스포트를 冷却시키면서 光勵起시키면 0.25eV의 트랩(trap)이 사라지고 0.85eV의 트랩이 새로 나타났다. 光電導가 양호한 結晶에서 T.S.C.가 잘 測定되었다.

• Journal of Microbiology
• /
• 제38권2호
• /
• pp.99-104
• /
• 2000

Hydrogen peroxide has been used in cleaning the piping of an advanced high-purity water system that supplies ultra-high purity water (UHPW) for 16 megabyte DRAM semiconductor manufacturing. The level of hydrogen peroxide-resistant bacteria in UHPW water was monitored prior to and after disinfecting the piping with hydrogen peroxide. Most of the bacteria isolated after hydrogen peroxide disinfection were highly resistant to hydrogen peroxide. However, the percentage of resistant bacteria decreased with time. The hydrogen peroxide-resistant bacteria were identified as Micrococcus luteus, Bacillus cereus, Alcaligenes latus, Xanthomonas sp. and Flavobacterium indologenes. The susceptibility of the bacteria to hydrogen peroxide was tested as either planktonic cells or attached cells on glass. Attached bacteria as the biofilm on glass exhibited increased hydrogen peroxide resistnace, with the resistance increasing with respect to the age of the biofilm regrowth on piping after hydrogen peroxide treatment. In order to optimize the cleaning strategy for piping of the high-purity water system, the disinfecting effect of hydrogen preoxide and peracetic acid on the bacteria was evaluated. The combined use of hydrogen peroxide and peracetic acid was very effective in killing attached bacteria as well as planktonic bacteria.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.307-311
• /
• 2002

This study was investigated the photoelectrochemical behavior of STS304 steel with $TiO_2$ thin films coating, applied by sol-gel method, for the purpose of cathodic photoprotection of the steel corrosion. One time $TiO_2$-coated STS304 steel adopted two kinds of $TiO_2$ sol solution has the most dominant photopotential abilities, which was -200mV vs. SCE and -500mV vs. SCE under illumination with 40W fluorescent lamp, respectively. That was more negative than the corrosion potential of the bare metal(-150 mV). The bleaching of TCE was confirmed on $TiO_2$-coated STS304 under UV-illumination with 20 W Black-light. This Study was concluded that $TiO_2$-coated STS304 exhibited both a cathodic photoprotection effect against corrosion and photocatalytic self-cleaning effect.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3279-3281
• /
• 1999

This paper describes a method of direct wafer bonding using surfaces activated by a radio-frequency hydrogen plasma. The hydrogen plasma cleaning of silicon in the RIE mode was investigated as a pretreatment for silicon direct bonding. The cleaned silicon surface was successfully terminated by hydrogen, The hydrogen-terminated surfaces were rendered hydrophilic, which could be wetted by Dl water rinse. Two wafers of silicon and silicon dioxide were contacted to each other at room temperature and postannealed at $300{\sim}1100^{\circ}C$ in an $N_2$ atmosphere for 2 h. From the AFM results, it was revealed that the surface became rougher with the increased plasma exposure time and power. The effect of the plasma treatment on the surface chemistry was investigated by the AES analysis. It was shown that the carbon contamination at the surface could be reduced below 5 at %. The interfacial energy measured by the crack propagation method was 122 $mJ/m^2$ and 384 $mJ/m^2$ for RCA cleaning and hydrogen plasm, respectively.

• 웰빙융합연구
• /
• 제4권1호
• /
• pp.19-25
• /
• 2021

Purpose: This study seeks to develop behavior-induced automatic separation X-Bin for disposable cup speculators. Some students throw away the contents. Research design, data and methodology: Therefore, environmental beautification workers spend a lot of time sorting disposable cups at school garbage collection sites. Disposable cups that have been thrown away like this are bad in terms of appearance and smell. In addition, cleaning inside garbage affects recycling rates and is closely related to environmental problems. Results: Clean cleaning reduces the amount of garbage incinerated without being recycled and reduces the cost of recycling. According to Korean Social Trends 2020, COVID-19 began to spread, and recycling of disposable items such as disposable cups increased by about 15 percent from the same period last year. Conclusions: These are classified for recycling, and the amount of garbage thrown on the streets is estimated to be larger. In order to prevent COVID-19s, the use of disposable goods is inevitable, but facilities are needed to dispose of them properly.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.407-410
• /
• 2003

We will introduce our new concept deposition system for SMOLED manufacturing in this conference. This system is designed to deposit organic and metal material to downward to overcome the limit of substrate size and process tact time hurdle for OLED mass production, and is organized with organic deposition chamber, substrate pre-cleaning chamber, metal deposition chamber and encapsulation system. These entire process chambers are integrated with linear type substrate transfer system. We also compare our new SMOLED manufacturing system with conventional vacuum deposition systems, and show basic organic thin film property data, organic material deposition property data, and basic device property.

• 한국염색가공학회지
• /
• 제12권3호
• /
• pp.183-191
• /
• 2000

The dyeing of silk fabric with chinese scholar tree extract was investigated. The colorant was extracted with distilled water, and concentrated under reduced pressure, and, finally spray-dried. The optimum temperature and dyeing time for the dyeing of silk with the scholar tree extract was $60^\circ{C}$ and 60 minutes respectively. In mordant dyeing, pre-mordanting method was most effective for color yield, and 1~2 % of mordant concentration was acceptable. Fastness of the dyed silk fabric to laundering and rubbing was shown to be good, but fastness to light, dry cleaning, and perspiration were varied with used mordants.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.561-566
• /
• 2008

The EMU of maintenance technique or system is changing on a large scale. To subway operation beginning the breakdown was born and every that time after the fact repaired. But, recently before the breakdown of the subway occurs, repairs in advance with the preventive maintenance concept which was exchanged. However, the preventive maintenance is to readjust, cleaning, tighten and the oil the repetition by the worker simple experience. This study on introduces the EMU of maintenance method which applies a automatic inspection equipment from the study contributing which develops the preventive maintenance system.

• 대한가정학회지
• /
• 제40권12호
• /
• pp.109-118
• /
• 2002

The Purpose of this study was to investigate dyeing properties and color fastness of Ainus firma sieb. et Zucc. Fruit, according to dyeing temperature, dyeing time, dyeing concentrations and various mordants. The results were as follows ; 1. The dyeabilities of the natural colorants extracted from Alnus firma fruit were investigated under various dyeing temperature, dyeing time and dyeing concentration. As a result, the optimum dyeing temperature, time and concentration of silk fabric with Alnus firma fruit were $60^{\circ}C$, 60min and 100％(o.w.f.) respectively. 2. Alnus firma fruit extract dyed reddish purple (RP hue) on the Fe-mordanted silk fabric. In the case of other mordants, silk fabrics dyed yellow (Y hue). 3. Generally, the light color fastness was relatively fair in the silk fabric dyed with the Alnus firma fruit and Fe mordant. The washing color fastness of color change of silk dyeings mordanted with Al, Sn showed 4 grade. However, the dry cleaning color fastness of the silk fabric was fastness was excellent. The rubbing color fastness showed 4 grade at the most of mordants except Cu.