• Textile Coloration and Finishing
• /
• v.22 no.1
• /
• pp.71-76
• /
• 2010

In this study the optimum dyeing conditions and blocking effect of UV deodorization efficiency of Ligustrum japonicum Thunb were investigated. Colorants were water-extracted from Ligustrum japonicum Thunb fruit and freeze-drided to obtain colorants powder. The effects of dye concentration, dyeing temperature, dyeing time, and the number of dipping count were studied. Fastness to dry cleaning, rubbing, perspiration, and light were measured according to KS K 0644, KS K 0650, KS K 0715 and KS K 0700, respectively. In order to examine the dyeability according to dyeing conditions, reflectance of fabrics were measured by using UV/VIS spectrophotometer. The bath ratio was 1:20. Dyeing concentration was 100, 200, 300, 400 and 500% on the weight of fiber. Dyeing time was 20, 40, 60, and 80 minutes. Dyeing temperature was 20, 40, 60, 80, and $100^{\circ}C$. The infrared high pressure dying machine was used. As dyeing concentration increased, dye adsorption increased up to 400% and it slowed down. Dye uptake was increased with raising themperature up to $80^{\circ}C$ and it slowed down. Dye adsorption occurred rapidly at first 20 minutes and then it slowed down and reached almost maximum dye uptake at 60 min. Dye uptake increased by repeated dyeing. Therefore, it is considered that optimum dyeing condition is 400%(o.w.f.), $80^{\circ}C$, 60 min. And repeated dyeing improves dye uptake. Color fastness to dry cleaning and rubbing was good, but light fastness and perspiration fastness was not good. Blocking effect of ultraviolet radiation and deodorization efficiency was good.

• Fashion & Textile Research Journal
• /
• v.4 no.1
• /
• pp.79-85
• /
• 2002

To develope natural dyeing materials from the unused plant materials, we had several dyeing experiments to investigate the optimum conditions of dyeing fabrics with the waste grape juice. Dyeing experiments were done under different dyeing conditions of dyeing time, dyeing temperature, pH and concentration of dyebath and mordants which were treated after dyeing. Experimental fabrics were silk, cotton, ramie and hemp. Color difference(${\Delta}E$) and Munsell's HV/C of the dyed fabrics and color fastness of silk dyed fabrics to dry cleaning, washing, rubbing, perspiration and light were measured. The color differences of dyed experimental fabrics were very slightly increased with dyeing time and the color of dyed silk was light purple and the cotton, ramie and hemp was light red purple. The color differences of dyed experimental fabrics were decreased and the color became lighter with dyeing temperature increased. The color differences of dyed experimental fabrics were decreased and the color changed from light purple to blue with the pH of dyebath increased. The color differences of dyed experimental fabrics were slightly increased with the concentration of dyebath increased. The color of dyed fabric changed with the mordant treatment and were different among the experimental fabrics. On the whole, blue tone increased with the Al and Fe mordant and green tone increased with the Cu mordant. The color fastness of dyed silk fabrics to light, washing (change) and perspiration (change) was bad and color fastness to dry cleaning and rubbing were good.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.219-229
• /
• 2016

The purpose of this study was to investigate the dyeability of silk fabrics with sweet potato stem leaf extract. To obtain the optimal dyeing conditions it was examined at various dyeing conditions(temperature, pH, time and bath ratio). The dyeability and the depths of shade which were evaluated in terms of K/S and CIELAB color difference values of the dyed and mordanted fabrics were also investigated. After dyeing, various color fastness(wash fastness, dry cleaning fastness, light fastness, rub fastness, and perspiration fastness) was measured and reviewed for UV protective, deodorant and antimicrobial functionality. The optimun output, as a result, was shown at 100% of dye concentration, $90^{\circ}C$ of dyeing temperature and 80 minutes of dyeing time while in terms of dye uptake depending on the kind of mordants and mordanting, it was found that among four mordants of $Alk(SO_4)_2$, $CuSO_4$, $SnCl_2$, and $FeSO_4$, post-mordanting with $SnCl_2$ showed the best results. Color fastness to dry cleaning, washing and rubbing was found strong at grade 4-5 and the grade to perspiration was as good as 3 while to light fastness was good at 4 as well. In aspects of functional properties, it showed excellent results of 98.3% UV protection rate and 88% deodorization rate. Antibacterial activity was 99.9% against staphylococcus aureus and 73.3% against klebisella pneumoniae. In conclusion, we validated that the dyestuffs from the disused sweet potato stem leaf extract would be useful as a natural dye material using the optimized conditions and dyeability for silk dyeing.

• The Research Journal of the Costume Culture
• /
• v.19 no.1
• /
• pp.96-103
• /
• 2011

It is well known that the Petasites japonicus has been used for a long time medicine for the treatment of allergic diseases such as lacquer poisoning. However, the exact components and dyeing properties of its effects is still not known. Therefore, the purpose of this study was to investigate the dyeing property and ultraviolet-cut ability of silk and nylon fabrics that was dyed variously with the Petasites japonicus. The Petasites japonicus extract was done by boiling with distilled water at $100^{\circ}C$ for 1 hour. As mordanting agent, we used Aluminum potassium sulfate ($AlK(SO_4)_2{\cdot}12H_2O$), Copper(II) sulfate pentahydrate ($CuSO_5{\cdot}5H_2O$), Iron(II)Chloride ($FeCl_2{\cdot}4H_2O$). The best K/S value of dyeing temperature and time, all the fabrics were $100^{\circ}C$, 90min. Silk fabric was dyed yellow(0.8Y 7.6/2.2) and nylon fabric was dyed reddish yellow(10.1 YR 7.4/3.0). Silk fabric and nylon fabric was changed greenish yellow on mordanting with $CuSO_5{\cdot}5H_2O$ and $FeCl_2{\cdot}4H_2O$ respectively. And the colorfastness of washing and dry-cleaning was improved by using mordanting agent(4~5 grade). Ultraviolet-cut ability(UV-B) was showed more 90% in dyed nylon fabrics.

• Korean Journal of Veterinary Service
• /
• v.44 no.1
• /
• pp.51-59
• /
• 2021

Various infectious diseases have threatened swine industries in Korea. One of the major risk factors of disease spread is livestock transport vehicle. For this reason, all abattoirs are required by law to have vehicle washing and disinfection facilities. However, detailed guidelines for cleaning and disinfection procedures were not provided. So in this study, assessment by visual observation was conducted to evaluate how well the cleaning and disinfection procedures of livestock transport vehicles have been performed in four different abattoirs in Jeonbuk, Korea. The observation included length of car washing time, the number of washing bay, type of washperson, type of disinfectant application, length of disinfection time, and compliance of driver's hygienic procedure. Every vehicle in all abattoirs conducted washing and disinfection procedure. However, there were procedural differences for each abattoirs and defects in the washing and disinfection procedures. In addition to that, the compliance of driver's hygienic procedure was not sufficient. Hence, detailed manuals on washing and disinfection procedures for involved people are required and it is necessary to establish an inspection and evaluation system.

• Human Ecology Research
• /
• v.58 no.3
• /
• pp.343-356
• /
• 2020

This paper examines the associations of having a helper for domestic work or childcare and time spent on it by couples in South Korea. We use five waves of panel survey data from the Korean Longitudinal Survey of Women and Families (KLoWF), which allows longitudinal changes within couples over time that account for potential selection effects and unobserved heterogeneity among individuals. With fixed effects, we find outsourcing is associated with a decrease in wife's time spent on domestic work or childcare by 1 hour per week. However, the decrease is concentrated on the unemployed wife's time, but not employed wife's time. In addition, outsourcing is not a significant factor for husband's time and the husband's share of total contribution. This may be because wives are the main provider of domestic work and childcare in Korea regardless of employment status or having any helper. Due to unequal contributions between husband and wife, using outsourcing also neither alleviates the employed wife's contribution nor changes the husband's contribution. However, the results may be underestimated because there are more common and diverse types of outsourcing in a broad sense, such as going out for dinner, buying prepared food, and using dry cleaning services. We expect future studies to consider more broad types of outsourcing and examine how relations with the couple's time use at home are different by type.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.485-491
• /
• 2012

Due to increase in production of the domestic textile industry, energy consumption in textile industry is still growing. Traditional dyeing machine has high temperature and pressure. Accordingly, it uses an indirect cooling system that utilize a heat exchanger to cool after the dyeing. However, this indirect cooling system consumes a great deal of water, takes prolonged periods of time to process and, most importantly, because of the condensing of the dye at the cooling stage requires further energy in reduction cleaning and washing process. Therefore, in this paper, we propose a direct cooling washing machine that replaces the traditional indirect cooling system to provide coolant into the dyeing machine. The newly proposed direct cooling washing machine will still use parts of the traditional dying but will be able to skip the cooling as well as the reduction cleaning and washing process, resulting in less processing time and lower energy consumption. Also, we made a prototype. The prototype was applied to dyeing machine to test the direct cooling washing machine's ability and dyeing property. Additionally, we compared indirect cooling washing machine with direct cooling washing machine about ability, material and energy saving assessment.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.1
• /
• pp.64-78
• /
• 2011

Surface of hydrophobic polyethylene membrane was modified to become hydrophilic by ion beam irradiation. Submerged membrane filtration reactors contained pristine membrane or surface-modified membrane and the influent to reactors was pickled radish wastewater. The objectives of this study was to investigate the variation of flux and pressure and the characteristics of pollutant removal such as organics, suspended solids and nutrients with time. The result of experiments using intermittent pristine membrane showed the occurrence of severe fouling by increasing permeate pressure rapidly in case of pickled radish wastewater but in synthetic wastewater, this phenomenon was not occurred. In experiments of variation flux after chemical cleaning and water cleaning in pristine membrane, chemical cleaning must be necessary for renewals of pollutant membrane. Performance of intermittent operation is higher than that of continuous operation. Reaching fouling time in the case of surface-modified membrane is 6 times as long as pristine membrane. According this reason, replacement expense of surface-modified membrane could be 1/6 of that of pristine membrane. Effluent from this process was relatively good water quality and performance in the removal efficiency of SS, nitrogen and phosphorus was particularly higher.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.6
• /
• pp.526-533
• /
• 2006

The prediction of heat-up time of an LCD glass plate in LCD glass pre-treatment process has been implemented in the present study. Firstly, the analytical solution for one-dimensional radiation heat transfer from IR heaters to a LCD glass plate is obtained. When the surface temperature of the IR heaters is set at 473 K, the heat-up time of LCD glass to averaged temperature of 383K is 28 seconds. In addition, a three dimensional full CFD analysis using STAR-CD is implemented in an effort to consider the effect of 3-D heat loss through the furnace walls. From the results of the 3-D CFB analysis, the heat-up time increases up to 32.5 seconds under the same conditions. When the IR heater temperature in creases up to 573 K, the heat-up time decreases to 12 seconds for the one-dimensional analytical solution and to 13.5 seconds for the 3-D CFD analysis, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.41-50
• /
• 2009

The flash memory has many advantages such as low power consumption, strong shock resistance, fast I/O and non-volatility. And it is increasingly used in the mobile storage device. Many researchers are studying the YAFFS, NAND flash file system, which is widely used in the embedded device. However, the existing YAFFS has two problems. First, it takes long time to mount the YAFFS file system because it scans whole spare areas in all pages. Second, the cleaning policy of the YAFFS does not consider the wear-leveling so that it cannot guarantee the duration of data completely. In order to solve these problems, this paper proposes a new content-based YAFFS that consists of a mounting time reduction technique and a content-cleaning policy by using content-based block management. The proposed method only scans partial spare areas of some special pages and provides the block swapping which enables the wear-leveling of data blocks. We performed experiments to compare the performance of the proposed method with those of the JFFS2 system and YAFFS system. Experimental results show that the proposed method reduces the average mounting time by 82.2% comparing with JFFS2 and 42.9% comparing with YAFFS. Besides, it increases the life time of the flash memory by 35% comparing with the existing YAFFS whereas no overheat is added.