• 한국CDE학회논문집
• /
• 제11권1호
• /
• pp.20-26
• /
• 2006

This paper presents a procedure to compute pencil curves from a triangular mesh which is offset with the radius of a given ball-end mill. An offset triangular mesh has numerous self-intersections caused by an abundance of invalid triangles, which do not contribute to the valid CL-surface. Conceptually, we can obtain valid pencil curves by combining all intersections tying on the outer skin of the offset triangular mesh, i.e., the valid CL-surface. The underlying concept of the proposed algorithm is that visible intersections are always valid for pencil curves, because visible intersections lie on the outer skin of the offset model. To obtain the visibility of intersections efficiently, the proposed algorithm uses a graphics board, which performs hidden surface removal on up to a million polygons per second.

• 대한기계학회논문집A
• /
• 제26권1호
• /
• pp.121-130
• /
• 2002

Clean stockers are being used by semiconductor and TFT-LCD manufacturers to store and buffer work in process. Since an important function of a stocker is to keep the contained material clean. The only way to keep the stored product clean is to provide constant clean airflow the product and through stocker, The airflow across the product prevent contamination from settling on the product. Up to now, stocker typically have been configured to receive their laminar airflow from fan filter units that are located on the side of the stocker This type of stocker may have such problems as complexity of structure, increment of temperature, mechanical vibration, initial investment and running cost. In this study, In order to solve the above mentioned problems, new air control system in stocker is proposed, which is to control open ratios of exits that are located on the side of the stocker without fan filter units. Open ratios of exits need to be optimized for the same quantities of airflow in each exit. In this study, static pressure regain was used for the analysis of the open ratios of exits theoretically and Blue Ridge Numerics FEM software, CFDesign, was used fur simulating airflow in stocker. As a result, Open ratios of exits important to provide constant clean airflow can be obtained by the analysis of static pressure regain and was verified by simulation results. Therefore, new air control system in stocker can be used by the semiconductor and TFT-LCD manufacturers.

• 한국수소및신에너지학회논문집
• /
• 제27권6호
• /
• pp.693-701
• /
• 2016

Steam gasification of low rank coals is possible at relatively low temperature and low pressure, and thus shows higher efficiency compared to high rank coals. In this study, the gasification reactivity of four different Indonesian low rank coals (Samhwa, Eco, Roto, Kideco-L) was evaluated in $T=700-800^{\circ}C$. The low rank coals containing $53.8{\pm}3.4$ wt% volatile matter in proximate analysis and $71.6{\pm}1.2$ wt% carbon in ultimate analysis showed comparable gasification reactivity. In addition, $K_2CO_3$ catalyst rapidly accelerated the reaction rate at $700^{\circ}C$, and all of the coals were converted over 90% within 1 hour. The XRD analysis showed no significant difference in carbonization between the coals, and the FT-IR spectrum showed similar functional groups except for differences due to moisture and minerals. TGA results in pyrolysis ($N_2$) and $CO_2$ gasification atmosphere showed very similar behavior up to $800^{\circ}C$ regardless of the coal species, which is consistent with the steam gasification results. This confirms that the indirect evaluation of the reactivity can be made by the above instrumental analyses.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2005년도 봄 학술발표회지 제14권(제1호)
• /
• pp.23-30
• /
• 2005

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1998년도 추계 학술발표회 논문집
• /
• pp.263-268
• /
• 1998

• 기술사
• /
• 제41권2호
• /
• pp.81-83
• /
• 2008

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2000년도 추계학술대회 논문집
• /
• pp.265-267
• /
• 2000

The objective of this study is to analyze, design and evaluate a new gas cleanup or sampling system that will remove erosive, corrosive, and fouling contaminants present in an effluent stream as either solid or liquid particles providing a clean gas stream. The gas clean-up or sampling system considered in this study is an irrigated, rotating element device. The device consists of a central disk-like hub from which emanate radially wires or cylindrical elements. (omitted)

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.132.1-132.1
• /
• 2010

자원고갈과 지구온난화 등으로 재생에너지의 사용 및 보급이 지속적으로 증가할 것으로 예상되지만, 세계적으로 매장량이 풍부한 석탄의 사용량은 2030년 이후에도 지속적으로 증가될 전망이다. 따라서 세계 각국은 기후변화 규제에 대응하면서도 청정하게 석탄을 사용하기 위한 기술의 개발 및 보급을 활발히 진행 중이며, 국내에서도 온실가스 감축과 동시에 국가 성장 동력화를 추진하고 있다. 석탄가스화 기술은 석탄을 가스화하여 생산된 CO, $H_2$가 주성분인 합성가스를 연료로 활용하는 기술로, 이용 효율이 높고 석탄을 천연가스 수준으로 청정하게 사용할 수 있는 차세대 석탄이용 기술이다. 본 연구에서는 pilot급 석탄 가스화기에서 생산된 합성가스에 함유된 산성가스를 고온에서 건식으로 제거하는 시스템을 구축하였으며, 석탄 합성가스를 고온 건식 정제시스템에 공급하기 위한 석탄가스화기의 운전특성을 파악하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.373-373
• /
• 2008

• 전기학회논문지
• /
• 제61권10호
• /
• pp.1461-1470
• /
• 2012

This paper reports the contamination performance of transmission line porcelain insulators tested under five different contaminant conditions - clean and ESDD (equivalent salt deposit density) level (A, B, C, and D) through measurement of their leakage current under drop of potential method. To estimate the contamination for transmission line porcelain insulators, leakage current waveform and its maximum value were measured under step-up power test. In the clean insulators test, % distortion factors decreased with increasing step-up power, and as the ESDD level increased, some characteristics such as frequency analysis, harmonics and % distortion facotor could be used for contamination diagnosis of the transmission line porcelain insulators.