• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2000년도 추계학술대회 논문집
• /
• pp.265-267
• /
• 2000

The objective of this study is to analyze, design and evaluate a new gas cleanup or sampling system that will remove erosive, corrosive, and fouling contaminants present in an effluent stream as either solid or liquid particles providing a clean gas stream. The gas clean-up or sampling system considered in this study is an irrigated, rotating element device. The device consists of a central disk-like hub from which emanate radially wires or cylindrical elements. (omitted)

• Korean Chemical Engineering Research
• /
• 제50권3호
• /
• pp.505-510
• /
• 2012

기포탑 반응기에서의 기체 체류량은 기포의 크기 분포 및 상승 속도와 밀접한 연관성을 갖는다. 따라서 많은 연구자들에 의하여 기포탑 반응기 내에 기포의 크기를 제어하기 위한 연구들이 진행되어 왔다. 본 연구에서는 스파져 이외의 영역에서도 기포의 거동을 제어하고 기체 체류량을 증진시키기 위하여 다단형 기포탑 반응기를 사용하였다. 특히, 3 종류의 서로 다른 크기의 반응기를 사용하여 다단 다공판이 기포의 유동 특성에 미치는 효과를 확인하였다. 나아가 개별 기포가 다공판을 통과하였을 때의 쪼개짐 빈도수 및 크기 분포 변화에 대하여 관찰함으로써 다공판의 영향에 대한 이해를 넓혔다. 또한 다양한 다공판 배치 형태에 따른 유동 특성을 관찰함으로써 다단형 기포탑 반응기에서의 다공판 설치에 대한 기준을 제시할 수 있었으며, 이를 바탕으로 높이 22 m, 직경 0.36 m의 벤치 스케일 다단형 기포탑 반응기를 제작하여 그 성능을 확인하였다.

• 전기학회논문지
• /
• 제62권6호
• /
• pp.782-785
• /
• 2013

Multi-walled carbon nanotubes were synthesized on Ni catalyst using thermal chemical vapor deposition. By introducing ammonia gas during the CNT synthesis process, clean and vertically aligned CNTs without impurities could be prepared. As the ammonia gas increased a partial pressure of hydrogen in the mixed gas during the CNT synthesis process, we could control the CNT synthesis rate appropriately. As the ammonia gas has an etching ability, amorphous carbon species covering the catalyst particles were effectively removed. Therefore catalyst particles could maintain their catalytic state actively during the synthesis process. Finally, we could obtain clean and vertically aligned CNTs by introducing $NH_3$ gas during the CNT synthesis process.

• 동력기계공학회지
• /
• 제13권1호
• /
• pp.13-18
• /
• 2009

In this study, flow characteristics at the regulators, which is very important for clean gas supply systems for semiconductors and LCD industries, are investigated. Numerical simulations are carried out to visualize flows at regulators for several flow rates and to investigate pressure losses at some parts in the regulator. Velocity field at the regulator along with the detailed velocity field near the spring and near the valve is shown. New regulator models are proposed in this paper, and numerical simulations are also carried out to visualize flows at regulator for several flow rates, and to investigate pressure losses at the parts in new models. Pressure drops a lot across the valve seat. Pressure drop increases as mass flow rate increases. Especially for small opening, pressure drop increases rapidly as mass flow rate becomes large.

• Korean Chemical Engineering Research
• /
• 제62권3호
• /
• pp.225-232
• /
• 2024

탄소 중립 사회로의 전환을 위해 전체 온실가스 배출량의 86.8%를 차지하는 에너지 생산 부문에서의 이산화탄소 배출량 감축이 필요하다. 현재 우리나라는 총 발전량의 60%를 석탄과 천연가스에 의존하고 있으며 이를 풍력, 태양광 등의 재생에너지로 대체하는 방법은 에너지 수급이 불안정하고 비용이 높다는 단점이 있다. 이를 해결하기 위해 본 연구에서는 기존에 사용되고 있는 NGCC(Natural Gas Combined Cycle) 공정을 기반으로 천연가스, 암모니아, 수소를 혼합하여 연소한다는 해결책을 제시하였다. 시뮬레이션을 수행한 결과, 이산화탄소 배출량을 효과적으로 줄일 수 있었으며 천연가스만을 연료로 이용해 얻은 전력량과 비교하였을 때 34%~238%의 전력을 얻었다. 천연가스, 암모니아, 수소의 질량분율에 대한 사례연구를 수행한 결과, 암모니아 비율이 증가할수록 발전량과 NO_x 배출량은 감소하였고 수소비율이 증가할수록 발전량과 NO_x 배출량은 증가하였다. 본 연구는 추후 다양한 혼합 연료의 조합 및 경제성 평가 등 혼합 연료 발전 분야의 가이드라인이 될 수 있을 것이다.

• 한국화재소방학회논문지
• /
• 제26권6호
• /
• pp.1-6
• /
• 2012

이산화탄소의 소화설비에는 개구부에 대한 소화약제 보충에 대해 구체적인 지침이 있다. 하지만 다른 가스설비, 청정소화약제 설비에는 필요한 경우 적용하라는 원칙 외에 구체적인 조항이 없다. 따라서 이 연구는 이산화탄소의 개구부 약제 추가 공식을 우리가 현제 사용하고 있는 다른 가스계 소화약제에 적용하는 것을 제시하였다.

• 한국수소및신에너지학회논문집
• /
• 제20권6호
• /
• pp.519-525
• /
• 2009

The catalytic steam reforming of woody biomass tar and soot to convert a synthetic gas containing hydrogen was investigated by using a bench-scale biomass gasification system. One commercial nickel-based catalyst, Katalco 46-6Q, and two different kinds of natural minerals, dolomite and olivine, were tested as a reforming catalyst at various reforming temperatures. The reaction characteristics of woody biomass tar were also investigated by TGA at a variety of heating rates. With all three catalysts conversion efficiency of tar and soot increased at increasing temperature. The reforming of tar and soot in the synthetic gas induce the increase of combustible gases such as $H_2$, CO and $CH_4$ in the product gas. The nickel-based catalyst showed a higher tar and soot conversion efficiency than mineral catalysts under the same temperature conditions.

• 한국수소및신에너지학회논문집
• /
• 제32권5호
• /
• pp.331-339
• /
• 2021

This study presents a novel way to enhance uniformity of the gas flow inside the solid oxide fuel cell (SOFC), which is critically important to fuel cell performance, by using dimples. A pattern of dimple, which works as a flow distributor/collector, is designed at the inlet and outlet section of a straight channel gas separator. Size of the dimples and the gap between them were changed to optimize the flow uniformity, and any change in size or gap is considered as one design. The results show that some dimple patterns significantly enhance the uniformity compared to baseline, about 4%, while the others slightly reduce it, about 1%. Besides, the dimple pattern also affects to the pressure drop in the flow channel, however the pressure drop in all cases are negligible (less than 26.4 Pa).

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1998년도 유체기계 연구개발 발표회 논문집
• /
• pp.209-214
• /
• 1998

A thermodynamic simulation method is developed for the process design and the performance evaluation of the gas turbine in IGCC power plant. The present study adopts four clean coal gases derived from four different coal gasification and gas clean-up processes as IGCC gas turbine fuel, and considers the integration design condition of the gas turbine with ASU(Air Separation Unit). In addition, the present simulation method includes compressor performance map and expander choking models for considering the off-design effects due to coal gas firing and ASU integration. The present prediction results show that the efficiency and the net power of the IGCC gas turbines are seperior to those of the natural gas fired one but they are decreased with the air extraction from gas turbine to ASU. The operation point of the IGCC gas turbine compressor is shifted to the higher pressure ratio condition far from the design point by reducing the air extraction ratio. The exhaust gas of the IGCC gas turbine has more abundant wast heat for the heat recovery steam generator than that of the natural gas fired gas turbine.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.199-201
• /
• 2005

This paper describes a simple procedure for the quantitative analysis of 7 PCBs (polychlorinated biphenyls) in soils on the waste reclaimed land, The procedure involved sample clean up using silicagel column, acetonitrile partition and sulfuric acid procedures. The instrumental technique is applied GC/PDD(gas chromatography/pulsed discharge detector) and GC/ECD(gas chromatography/electron capture detector). Concentration of $sub-{\mu}g/g$ level was attainable with 20g soils on the waste reclaimed land.