• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.5
• /
• pp.18-38
• /
• 2002

A previous study on the model coatings based on latex-bound plastic pigment coatings (1) has been extended to latex-bound No. 1 clay, ultra-fine ground calcium carbonate (UFGCC), and clay-carbonate pigment mixture coatings, which are being widely used in the paper industry. The latex binder used was a good film-forming, monodisperse S/B latex or 0.15$\mu\textrm{m}$. No. 1 clay was representative of plate-like pigment particles, whereas UFGCC was of somewhat rounded rhombohedral pigment particlel. Both of them had negatively skewed triangular particle size distributions having the mean particle suet of 0.7${\mu}{\textrm}{m}$ and 0.6$\mu\textrm{m}$, respectively. Their packing volumes were found to be 62.5% and 657%, respectively. while their critical pigment volume concentrations (CPVC's) were determined to be 52.7% and 50.5% ( average of 45% caused by the incompatibility and 55.9% extrapolated) by coating porosity, respectively. Each pigment/latex coating system has shown its unique relationship between coating properties and pigment concentrations, especially above its CPVC. Notably, the clay/latex coating system hat shown higher coating porosity than the UFGCC/latex system at high pigment concentrations above their respective CPVC's. It was also found that their coating porosity and gloss were inter-related to each other above the CPVC's, as predicted by the theory. More interestingly, the blends of these two pigments have shown unique rheological and coating properties which may explain why such pigment blends are widely used in the industry. These findings have suggested that the unique structure of clay coatings and the unique high-shear rheology of ground calcium carbonate coatings can be judiciously combined to achieve superior coatings. Importantly, the low-shear viscosity of the blends was indicative of their unique packing and coating structure, whereas their high-shear rheology was represented by a common mixing rule, i.e., a viscosity-averaging. Transmission and scanning electron and atomic force microscopes were used to probe the state of pigment / latex dispersions, coating surfaces, freeze fractured coating cross-sections, and coating surface topography. These microscopic studies complemented the above observations. In addition, the ratio, R, of CPVC/(Pigment Packing Volume) has been proposed as a measure of the binder efficiency for a given pigment or pigment mixtures or as a measure of binder-pigment interactions. Also, a mathematical model has been proposed to estimate the packing volumes of clay and ground calcium carbonate pigments with their respective particle size distributions. As well known in the particle packing, the narrower the particle size distributions, the lower the packing volumes and the greater the coating porosity, regardless of particle shapes.

• Journal of Conservation Science
• /
• v.38 no.4
• /
• pp.327-333
• /
• 2022

Sri Lanka has four types of mural painting styles; Classic, Late Classic, Kandyan, and Southern styles, but there is little research on scientific analysis for mural paintings. In this study, we analyze white, yellow, and red clay pigments which were collected from ancient producing sites. Analyzing pigment samples shows that samples are containing aluminum oxide(Al₂O₃) and silicon dioxide(SiO₂) which are connected to the soil. And a degree of iron oxidation determines yellow or red colors. To understand the characteristics of clay pigment samples, we go over previous pigment analyses of mural paintings in Sri Lanka. Kaolin is identified after the 17^th century, yellow and red ochre are applied in early periods, Classic and Late Classic styles. The change in raw materials of pigments occurred in the 17^th century.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.3
• /
• pp.1-8
• /
• 2012

The effects of several factors including organic pigment blending and calending conditions on the surface and optical properties of coated paper were investigated. When clay and calcium carbonate are blended in the ratio of 7 to 3, highest smoothness and relative sediment volume were obtained. When organic pigments were added to the mixture of clay and calcium carbonate, the relative sediment volume did not changed significantly. However, when organic pigments were added to calcium carbonate, sheet gloss and smoothness were improved, and showed the better results than that obtained from the mixture of organic pigment and clay. When organic pigment is blended with clay, the particles of organic pigment are buried in the packing structure of coating layer. However, the particle shape of calcium carbonate is quite different from that of clay, and the aspect ratio of calcium carbonate is similar to that of organic pigment. Thus organic pigment particles are not buried and improved effectively the physical characteristics of coating layer. When the hollow sphere pigment was blended, opacity and sheet gloss were improved significantly. Even though the coating color applied was reduced, the similar level of opacity was maintained. Also, if particle size and void volume are increased, gloss is improved, because coating layer is easily transformed in calendering. Therefore, even though lower pressure was applied during calendering, the smoothness of surface of coating layer was improved, and the decrease of void volume in coating layer was reduced, and the quality of coated sheet can be improved.

• Journal of Conservation Science
• /
• v.28 no.2
• /
• pp.101-112
• /
• 2012

The Donggwanwangmyo Shrine was built in the period of Joseon Dynasty in 1602. There are Clay Statues (Gwanwo, Jangbi, Woojanggun, Juchang, Jojaryoung and so on) enshrined in the inside of the main hall. Original color of these Clay Statues are deteriorated by inorganic pollutant like dust. And the origanal forms were damaged during several process of restorations and repaintings. This study carried out XRD, SEM-EDS, P-XRF and chromaticity measurement for characterization of pigments which painted on Clay Statues. As a result, cinnabar, hematite and red lead were used to paint in pigments for the red and brown colors. Light red pigment was made by gypsum with these minerals that make colors. Graphite and gold were used to color of black and gold pigment, respectively. Green pigment is identified of malachite, atacamite and glauconite. Blue pigment which is clearly painted on Clay Statues is interpreted a morden industrial pigment that were painted at repair work. White pigments are detected calcite, gypsum and silver white. Orpiment and litharge were used to color of yellow and light yellow pigment.

• Conservation Science in Museum
• /
• v.2
• /
• pp.69-76
• /
• 2000

This study, a part of scientific analysis of the 23 Neolithic red earthenwares excavated from southeastern coast and islands. We analyzed earthenware through statistical method and hardness analysis of clay, following the analysis of clay composition, its firing temperature, pigment composition and its thickness. Clay composition was analyzed by using ICP-AES and XRF, and then Principal Component Analysis (one of multivariate methods) was used for classification. As a result, clay of the earthenware was classified into 3 groups(Bumbang, Youkjido and other sites). In addition, hardness analysis of pigment and clay based on the depth of earthenware surface showed that pigment layer containing lots of Fe₂O₃ had higher hardness than clay part, which can be interpreted that Fe₂O₃ contributes to raising hardness in case of high temperature firing. The fact that pigment hardness is higher than that of clay part implies that pigment was applied before firing.

• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.497-506
• /
• 2017

An investigation on the records of old document was conducted to identify the producing area of white clay and there were on-the-spot surveys to secure raw materials of white clay pigment. Based on the survey results, six raw materials were obtained from the region of Gangwon-do and Gyeongsang-do, South Korea and white clay pigment was subsequently manufactured by applying the hydraulic elutriation method. The results show that the major constituent minerals of YBW, HBW, and MCW were quartz and plagioclase, whereas SGW, HOW, and HGW were composed of clay minerals such as kaolinite and illite. HGW showed the highest $L^*$-value of 92.9. HOW and HGW showed an opacity of 94.1% and 89.6%, respectively, and they had excellent spreadability (270.3 mm and 223.3 mm, respectively). Therefore, HGW, HOW, and SGW have excellent characteristics in terms of color, opacity, and spreadability, and are considered to be highly applicable as white pigments for the Dancheong.

• KIEAE Journal
• /
• v.9 no.1
• /
• pp.77-83
• /
• 2009

In this experiment, we used different addition ratio of the pigment and straw, to improve the decorative effect of the finishing touch while finding the kinds of clay colors taking on many sophisticated images, through the comparison between the various colors and textures of the surface. (1) To test the plaster material, added were the pigment of Red, Yellow, Black, and Green by the percentages of 0.5, 1, 1.5, 2, and 2.5, respectively, followed by the analysis of the color changes of the plaster material using the Photoshop (RGB). The results showed the bigger the addition ratio of the red color is, the higher the numeral values of RGB after it dried. However the brightness after drying didn't showed a big difference depending on the addition ratio. With the addition of the yellow pigment, the color difference between after and before drying was bigger in the order of Blue, Green and Red; the brightness increasingly rose while the saturation changed little. (2) When we scratched the plaster surface with U and V shape carving knives, the U knife didn't make a clean shape digging around the clay plaster material but with smooth textures, while the V knife made a clean cut, which represents its readily use in terms of the decorative function of the clay plaster. (3) In an experiment the surface texture was tested with different lengths and additions ratio of the straw, addition of 2cm straw by 1, 2, and 3% presented the most appropriate surface of the plaster.

• Journal of Forest and Environmental Science
• /
• v.18 no.1
• /
• pp.97-105
• /
• 2001

The main objective of this study was to investigate effects of pigment mixed with different ratio on the double coated paper. Mineral pigments such as clay and ground calcium carbonate(GCC) as well as hollow sphere plastic pigment were used to evaluate the physical, optical properties and printabilities of double coated paper. The physical properties such as gloss and smoothness, and the printability(ink gloss) of double coated paper were measured to evaluate the effects of the bottom layer on improving the properties of top layer. The data indicated that the usage of hollow sphere plastic pigment for the bottom layer coating improved the surface properties of double coated paper, and that ink gloss was significantly influenced by the structure of bottom layer even when hollow sphere plastic pigment was used for the bottom layer coating.

• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.35-45
• /
• 2013

The Clay Statues of Donggwanwangmyo Shrine (Treasure No. 142) are highly damaged physical weathering which are crack, exfoliation. Pigment of surface are discolored by chemical weathering like dust. The result of ultrasonic velocity measurement, low velocity zone was measured the lowest part of Woojanggun Statue. Deficiency condition of pigment layer was evaluated quantitatively through infrared Thermography. As a result, exfoliation part was detected at high temperature. Making techniques of the Clay statues were identified by gamma rays, infrared TV, SEM. All Clay Statues were founded on wood base and joints of wood were fixed using thin iron wires. After wood base was twisted a straw rope, it was made by clay. Clay was blended with rice straw to prevention of crack and exfoliation. The upper side of clay layer was coated with Hanji(Korean handmade paper) and cotton in order to isolate the pigment layer.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.2
• /
• pp.47-53
• /
• 2004

In this experiment the effects of the packing structure of pigment on the surface characteristics (smoothness and gloss) of coated paper are studied. Four different kinds of inorganic pigments(clay), ground calcium carbonate(GCC), two of precipitated calcium carbonates(PCC), and two organic pigments(solid bead and hollow type) were used. The method of measuring the relative sediment volume(RSV) was used to analyze the packing structure of coating layer. The relative sediment volume was measured, using the pressure dewatering dry-cake method(PDDM) and centrifuge method. Also, the particle size distribution of coating pigment was determined. The results showed that small amount of organic pigment, added to inorganic pigment, improved smoothness and its effect was greater when GCC was used as inorganic pigment. The efficiency of organic pigment depended upon the inorganic pigment since the organic pigment is packed in the pores formed by the inorganic pigment.