• Geomechanics and Engineering
• /
• v.17 no.2
• /
• pp.133-143
• /
• 2019

An optimal hydraulic section is critical for irrigated water conservancy in seasonal frozen ground due to a large proportion of water leakage, as investigated by in-situ surveys. This is highly correlated with the frost heave of underlain soils in cold season. This paper firstly derived a practical model for frost heave of clayey soils, with temperature dependent thermal indexes incorporating phase change effect. A model test carried out on clay was used to verify the rationality of the model. A novel approach for optimizing the cross-section of irrigation canals in cold regions was suggested with live updated geometry characterized by three unique geometric constraints including slope of canal, ratio of practical flow section to the optimal and lining thickness. Allowable frost heave deformation and tensile stress in canal lining are utilized as standard in computation iterating with geometry updating while the construction cost per unit length is regarded as the eventual target in optimization. A typical section along the Jinghui irrigation canal was selected to be optimized with the above requirements satisfied. Results prove that the optimized hydraulic section exhibits smaller frost heave deformation, lower tensile stress and lower construction cost.

• Advances in materials Research
• /
• v.12 no.4
• /
• pp.287-308
• /
• 2023

The main objective of this article is to highlight the progress made in the development of new materials that have been gradually used by humans until today. Of course, this progress must be associated with other parameters in order to guarantee sustainable development. For this, today, it has become urgent to reduce the consumption of cement by resorting to its partial or total replacement by other similar materials in order to reduce CO₂ emissions in our environment. This should certainly help to develop greener building materials. In this study, it was decided to proceed with the partial or total replacement of Portland cement type CEM II/B-L-42.5N by slate and lime that had not undergone any previous transformation. The results obtained revealed that the mortar whose substitution compared to the replacement of cement (100%) cement and sand (0/4) confers better kinetics than those of the series composed of(100%) cement and fraction rubble (0/1).

• Journal of architectural history
• /
• v.19 no.3
• /
• pp.7-29
• /
• 2010

The form of the Wangheungsa Temple's wooden pagoda site is that of the traditional form of the wooden pagodas constructed during the Baekjae Period. Likewise, it is an important ruin for conducting research on the form and type of the wooden pagodas constructed during the Baekjae Period. In particular, the method used for the installation of the central pillar's cornerstone is a new technique. The purpose of this research is to restore the ruin of the Wangheungsa Temple's wooden pagoda of the Baekjae Period that remains at the Wangheungsa Temple's wooden pagoda site. Until now, research conducted on the wooden pagoda took place mostly centered on the Hwangryongsa Temple's wooden pagoda. Meanwhile, the reality concerning Baekjae's wooden pagoda is one in which there were not many parallel cases pertain to the design for restoration. This research paper wants to conduct academic examination of the Wangheungsa Temple's wooden pagoda to organize the intention of design and design process in a simple manner. This research included review of the Baekjae Period's wooden pagoda related ruins and the review of the existing wooden pagoda ruin to analyze the wooden pagoda construction technique of the era. Then, current status of the Wangheungsa Temple's wooden pagoda site is identified to define the characteristics of the wooden pagoda, and to set up the layout format and the measure to estimate the size of the wooden pagoda in order to design each part. Ultimately, techniques and formats used for the restoration of the wooden pagoda were aligned with the wooden pagoda of the Baekjae Period. Basically, conditions that can be traced from the current status of the Wangheungsa Temple site excavation using the primary standards as the standard. Wangheungsa Temple's wooden pagoda was designed into the wooden pagoda of the Baekjae's prosperity phase. The plane was formed into $3{\times}3$ compartments to design into three tier pagoda. The height was decided by factoring in the distance between the East-West corridors, size of the compartment in the middle, and the view that is visible from above the terrace when entering into the waterway. Basically, the origin of the wooden structure format is based on the Goguryeo style, but also the linkage with China's southern regional styles and Japan's ancient wooden pagoda methods was factored in. As for the format of the central pillar, it looks as if the column that was erected after digging the ground was used when setting up the columns in the beginning. During the actual construction work of the wooden pagoda, central pillar looks as if it was erected by setting up the cornerstone on the ground. The reason that the reclaimed part of pillar that use the underground central cornerstone as the support was not utilized, was because the Eccentric Load of the central pillar's cornerstone was factored in the state of the layers of soil piled up one layer at a time that is repeated with the yellow clay and sandy clay and the yellow clay that were formed separately with the $80cm{\times}80cm$ angle at the upper part of the central pillar's cornerstone was factored in as well. Thus, it was presumed that the central pillar was erected in the actual design using the ground style format. It is possible to presume the cases in which the reclaimed part of pillar were used when constructed for the first time, but in which central pillar was installed later on, after the supplementary materials of the underground column is corroded. In this case, however, technique in which soil is piled up one layer at a time to lay down the foundation of a building structure cannot be the method used in that period, and the reclamation cannot fill up using the $80cm{\times}80cm$ angle. Thus, it was presumed that the layers of soil for building structure's foundation was solidified properly on top of the central pillar's cornerstone when the first wooden pagoda construction work was taking place, and that the ground style central pillar was erected on its upper part by placing the cornerstone once again. Wangheungsa Temple's wooden pagoda is significant from the structure development aspect of the Korean wooden pagodas along with the Hwangryongsa Temple's wooden pagoda. Wangheungsa Temple's wooden pagoda construction technique which was developed during the prosperity phase of the Baekjae Period is presumed to have served as a role model for the construction of the Iksan Mireuksa Temple's wooden pagoda and Hwangryongsa Temple's wooden pagoda. With the plan to complement the work further by excavating more, the basic wooden pagoda model was set up for this research. Wangheungsa Temple's wooden pagoda was constructed as at the Baekjae Kingdom wide initiative, and it was the starting point for the construction of superb pagoda using state of the art construction techniques of the era during the Baekjae's prosperous years, amidst the utmost interest of all the Baekjae populace. Starting out from its inherent nature of enshrining Sakyamuni's ashes, it served as the model that represented the unity of all the Baekjae populace and the spirit of the Baekjae people. It interpreted these in the most mature manner on the Korean peninsula at the time.

• Journal of Environmental Science International
• /
• v.23 no.2
• /
• pp.181-192
• /
• 2014

In Korea, the chemical oxygen demand($COD_{sed}$) in freshwater sediments has been measured by the potassium permanganate method used for marine sediment because of the absence of authorized analytical method. However, this method has not been fully verified for the freshwater sediment. Therefore, the use or modification of the potassium permanganate method or the development of the new $COD_{sed}$ analytical method may be necessary. In this study, two modified $COD_{sed}$ analytical methods such as the modified potassium permanganate method for $COD_{Mn}$ and the modified closed reflux method using potassium dichromate for $COD_{Cr}$ were compared. In the preliminary experiment to estimate the capability of the two oxidants for glucose oxidation, $COD_{Mn}$ and $COD_{Cr}$ were about 70% and 100% of theoretical oxygen demand(ThOD), respectively, indicating that $COD_{Cr}$ was very close to the ThOD. The effective titration ranges in $COD_{Mn}$ and $COD_{Cr}$ were 3.2 to 7.5 mL and 1.0 to 5.0 mL for glucose, 4.3 to 7.5 mL and 1.4 to 4.3 mL for lake sediment, and 2.5 to 5.8 mL and 3.6 to 4.5 mL for river sediment, respectively, within 10% errors. For estimating $COD_{sed}$ recovery(%) in glucose-spiked sediment after aging for 1 day, the mass balances of the $COD_{Mn}$ and $COD_{Cr}$ among glucose, sediments and glucose-spiked sediments were compared. The recoveries of $COD_{Mn}$ and $COD_{Cr}$ were 78% and 78% in glucose-spiked river sediments, 91% and 86% in glucose-spiked lake sediments, 97% and 104% in glucose-spiked sand, and 134% and 107% in glucose-spiked clay, respectively. In conclusion, both methods have high confidence levels in terms of analytical methodology but show significant different $COD_{sed}$ concentrations due to difference in the oxidation powers of the oxidants.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.3
• /
• pp.46-62
• /
• 2010

This study was conducted to understand the water and soil properties to propose the promotion of vegetation environment at farm pond depression. We selected 8 palustrine wetlands from agricultural area after consideration of human interference, surround land use, and size of area. Water quality analysis showed that the average SS, T-N, T-P were over the limit of agricultural water quality standard level at some sites. The cause for deterioration of water quality is supposed by the long-term stagnation of water in palustrine wetland. The recommended measures to improve water quality are as follows; improving water circulation by connecting with nearby natural water, preventing oxygen depletion by dredging deposit, lowering down T-N and T-P by removing autumn plants, preventing inflow of phosphorus in fertilizer ingredients which is the main cause for high T-P. The soil contamination of the surveyed area was about the same level of average heavy metal contents in soils from 2,010 paddy fields in Korea, which was much lower than soil contamination standards. As for soil texture, sand content was 40~90% and clay content was less than 20%. The content of silt and clay in soil from community of floating-leaved:submerged hydrophytes and community of emergent hydrophytes was higher that of soil from community of hygrophytes, and the content of sand in soil from community of hygrophytes was 10% higher than underwater soil. In terms of bulk density, the average was 0.24~0.96g/$cm^3$, which was quite low, because of high content of peat and organic matter in soil of the surveyed area. As for the average content of organic matter, community of floating-leaved:submerged hydrophytes was 18.25g/kg, community of emergent hydrophytes was 16.88g/kg, and community of hydrophytes was 25.63g/kg. The range of content of T-N in soil of community of floating-leaved；submerged hydrophytes was 0.022~0.307%, and that of community of emergent hydrophytes was 0.029~0.681% and that of community of hydrophytes was 0.088~0.325%. Apart from three sites in the surveyed area, most parts were over the standards or below the standard. After this study, we will conduct and discuss the relationship between vegetation characteristics and environments, which will be used of the best practical management and restoration of wetland.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.9
• /
• pp.105-114
• /
• 2004

Consolidation characteristics have been investigated by using Rowe cell consolidation tester for dredged soil, which is more than two times as much as the liquid limit. To examine the effects of variation of water content on consolidation characteristic, tests were carried out varying the initial water content from $100\%\;to\;150\%.$ The results were compared with the consolidation characteristics of remolded clay. The test results showed that the hither the initial water content of dredged clay was, the more noticeable the non-linear behavior of e-log P curves occurred. The variation of the gradient was apparent to load stage 40kPa and became less apparent after load stage 80kPa on the e-log P curves. Ratio of compression index stayed within the range suggested by Mesri and variation of initial water content has hardly influenced the coefficient of consolidation. On the contrary, it was found that the magnitude of consolidation load affects the vertical coefficient of consolidation. The variation of stratum thickness during consolidation processing needs to be taken into consideration since hydraulic fill would go through a much larger scale strain than land soil when it is subject to a load. In this study, the consolidation period considering the variation of stratum thickness was analyzed and the results were compared with those of existing consolidation studies which did not consider the variation of stratum thickness. According to the results of the study, the consolidation period of the ground with a larger strain was calculated more close to observed value in case of Mikasa theory which takes the variation of stratum thickness into consideration.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.11
• /
• pp.5-19
• /
• 2016

This paper presents the results from three-dimensional finite element (FE) analysis undertaken to provide insight into the lateral behaviors of piled gravity base foundation (GBF) for offshore wind turbine. The piled GBF was originally developed to support the gravity based foundation in very soft clay soil. A GBF is supported by five piles in a cross arrangement to achieve additional vertical bearing capacity. This study considered four different cases including a) single pile, b) three-by-three group pile (with nine piles), c) cross-arrangement group pile (with five piles), and d) piled GBF. All the cases were installed in homogenous soft clay soil with undrained shear strength of 20 kPa. From the numerical results, p-y curves and thus P-multiplier was back-calculated. For the group pile cases, the group effect decreased with increasing the number of piles. Interestingly, for the piled GBF, the P-multipliers showed a unique trend, compared to the group pile cases. This study concluded that the global lateral behaviour of the piled GBF was influenced strongly by the interaction between GBF and contacted soil surface.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.394-401
• /
• 2021

The construction of new renewable energy facilities is steadily increasing every year. In particular, the offshore wind farm market, which has abundant development scalability and a high production coefficient, is growing rapidly. The southwest sea has the highest possible offshore wind power potential, and related projects are to be promoted. This study presents a basic design procedure by the EUROCODE and considers structural safety in the development of an effective of shore wind foundation in the clay layer. In a previous study, the wind power generator of 5MW class was the main target, but the 8MW of wind turbine generator, which meets the technical trend of the wind turbine market in the Southwest sea, was selected as the standard model. Furthermore, a foundation that fulfills the geological conditions of the Southwest sea was developed. The structural safety of this foundation was verified using finite element method. Moreover, structural safety was secured by proper reinforcement from the initial design. Based on the results of this study, structural safety check for various types of foundations is possible in the future. Additionally, specialized structural design and evaluation guidance were also established.

• Structural Engineering and Mechanics
• /
• v.52 no.6
• /
• pp.1069-1084
• /
• 2014

The long-term performance of plates resting on viscoelastic foundations is a major concern in the analysis of soil-structure interaction. As a powerful mathematical tool, fractional calculus may address these plate-on-foundation problems. In this paper, a fractionalized Zener model is proposed to study the time-dependent behavior of a uniformly loaded rectangular thin foundation plate. By use of the viscoelastic-elastic correspondence principle and the Laplace transforms, the analytical solutions were obtained in terms of the Mittag-Leffler function. Through the analysis of a numerical example, the calculated plate deflection, bending moment and foundation reaction were compared to those from ideal elastic and standard viscoelastic models. It is found that the upper and lower bound solutions of the plate response estimated by the proposed model can be determined using the elastic model. Based on a parametric study, the impacts of model parameters on the long-term performance of a foundation plate were systematically investigated. The results show that the two spring stiffnesses govern the upper and lower bound solutions of the plate response. By varying the values of the fractional differential order and the coefficient of viscosity, the time-dependent behavior of a foundation plate can be accurately captured. The fractional differential order seems to be dependent on the mechanical properties of the ground soil. A sandy foundation will have a small fractional differential order while in order to simulate the creeping of clay foundation, a larger fractional differential order value is needed. The fractionalized Zener model is capable of accounting for the primary and secondary consolidation processes of the foundation soil and can be used to predict the plate performance over many decades of time.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.271-276
• /
• 2006

In this paper a polarimetric airborne SAR measurement has been used to study the radar polarimetric characteristics in the intertidal area on the south coastof the Korea. The L-band NASA/JPL airborne SAR (AIRSAR) data, which were acquired on the intertidal zone during PACRIM-II Korea campaign on September 30, 2000, were used for this research. The most intertidal zones of Yeoja Bay are composed of muddy soils with high silt and clay percentage. Models of microwave scattering from rough surfaces, i.e., semi-empirical model, and Extended Bragg model, were applied to investigate the surface characteristics of intertidal zones.