• Journal of Acupuncture Research
• /
• 제27권1호
• /
• pp.31-41
• /
• 2010

Objectives : The purpose of this study is to set up the standard for Classification and Diagnosis of Low Back Pain by through collecting bibliographic study on Low Back Pain and related general symptoms in classical literatures Methods : We investigated the contents of classical literatures about chronic low back pain and related general symptoms. With this contents, we established a systemic classification and diagnostic standard for Low back pain. Results : There are many different opinions on classification of low back pain and general symptoms in oriental medicine classical literature. Every opinion is reasonable, so it is difficult to establish a diagnosis of Low back pain. But it is necessary to set up the one-systemic classification and diagnostic technique of Low back pain. Conclusions : We conclude that the Ten type Low back pain classification of in Dong-Eui-Bo-Gam is a reasonable standard for diagnostic classification.

• 한국대기환경학회지
• /
• 제18권3호
• /
• pp.231-245
• /
• 2002

A better knowledge of emission inventories can serve several important functions such as provision of public information, identification of primary sources, assessment of temporal and spatial trend, and analysis for national modelling studies. The purpose of this paper is to propose the new air emission source categories on the basis of the Korea Standard Industrial Classification. Hence, the paper focuses on reviewing and comparing the air emission sources categories of USEPA, and EU. The new emission source categories compose Tiers 1, 2, and 3. For Tier 1, there are 14 categories; fuel combustion-utilities, industries, and heating and others, chemical and allied product manufacturing, metals processing, and petroleum and related industries, etc. Tier 2 consists of small categories classified minutely in Tier 1. Tier 3 connects the categories of Tier 2 with the Korea Standard Industrial Classification.

• 정보관리연구
• /
• 제35권3호
• /
• pp.109-123
• /
• 2004

과학기술정보의 의미적 상호운용성 문제는 빈번하게 발생한다. 잘 만들어진 분류체계는 상이한 데이터베이스 간에 의미상 불일치 없이 정보를 교환하기 위한 도구로 사용될 것이다. 하지만 각 데이터베이스가 취하고 있는 분류체계가 상이함으로 인해서 여전히 현실적인 장벽이 존재한다. 따라서 분류체계간의 일치 및 조화는 매우 시급한 문제이다. 본 논문의 목표는 다른 분류체계('국가과학기술표준분류'와 'KISTI 표준 분류')를 갖는 데이터베이스간의 정보 교환 시에 발생할 수 있는 의미적 불일치를 해결하는 것이다. 이를 위해서 과학기술의 개념적 체계 분석을 수행하였고 다섯가지의 일치/불일치 유형을 사례에 기반하여 분석하였다.

• 한국CDE학회논문집
• /
• 제12권3호
• /
• pp.191-199
• /
• 2007

In order to construct a data warehouse of process plant equipment, a classification structure should be defined first, identifying not only the equipment categories but also attributes of an each equipment to represent the specifications of equipment. ISO 15926 Process Plants is an international standard dealing with the life-cycle data of process plant facilities. From the viewpoints of defining classification structure, Part 2 data model and Reference Data Library (RDL) of ISO 15926 are seen to respectively provide standard syntactic structure and semantic vocabulary, facilitating the exchange and sharing of plant equipment's life-cycle data. Therefore, the equipment data warehouse with an ISO 15926-based classification structure has the advantage of easy integration among different engineering systems. This paper introduces ISO 15926 and then discusses how to define a classification structure with ISO 15926 Part 2 data model and RDL. Finally, we describe the development result of an ISO 15926-based classification structure for a variety of equipment consisting in the reactor coolant system (RCS) of APR 1400 nuclear plant.

• 한국문헌정보학회지
• /
• 제22권
• /
• pp.259-304
• /
• 1992

This paper examines 'Religion Class' in the scheme of the DDC. The major findings of the study are summerized as follows. 1. The first edition of DDC was published in 1876 in order to classify Amherst College Library collections. In spite of the continuous study and revision of the experts, the frameworks of the DDC systems are still kept unchanged. Only their subdivisions, reflecting those developments in the academic world, are developed and detailed more sophisticatedly. 2. The division of 200 does not function as generalities for all class of religion. Therefore, it is necessary to amend the division of 200 to serve generalities for all the religions of the world. 3. Standard subdivision for the christian religion and for the non-christian religion is different. So, the mnemonic nature has become weakened due to the dual standard subdivisions and the classification number becomes much longer and complicated. Therefore, one standard subdivision for all religions of the world is required. 4. Religion science was organized in late 19 C and developed continuously, but the DDC does not accomodate the religion science as a science. Accodingly, the DDC should be revised recognize religion science as a science not the christian science. 5. The deployment of classification scheme in Dewey's 200 is severely biased. That is to say, 9 division were assigned for christian religion, whereas only 1 division was assigned for non-christian religion. Therefore, an adjustment should be made to allocate subdivisions equally to all religions of the world. 6. General classification order of religion is prehistoric, primitive, ancient, modem and world religion in religion science. But, DDC does not accept this general classification order of religion, sticking to the biased expansion towards christianity. Therefore, DDC must adopt the general classification order of religion in the religion science. 7. Lastly, because of the limitation of decimal notation in DC, DDC does not accomodate new subject equally and classification number becomes longer. Therefore, centesimal expansion is proposed in order to make the classification number short, to enlarge its capacity of inclusion of new subject and to maintain consistency in the scheme.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.236-239
• /
• 2009

Since 1990s, we have achieved a certain level of success in standardization of design, construction, and material on housing and public buildings with the national-level promotion. A practical connecting device that can synthesize all the serial processes is required to maximize the effect of construction material standardization. However, desired outcome of the standardization is not achieved yet because these serial standards and notification practices are decided by each part of the process and some are congested. In this study, we aim to improve a general organizational system of Korean Industrial Standard (KS) which is the most fundamental tool for the standardization of construction materials moving from a conventional idea that the standard is only for the material and components producers to a concept that can also be shared by the designers and construction workers. To achieve this, we propose an improvement plan for the Korean Industrial Standard in the perspective of three-tier classification system.

• 한국주거학회논문집
• /
• 제20권3호
• /
• pp.59-67
• /
• 2009

Since 1990s, we have achieved a certain level of success in standardization of design, construction, and material on housing and public buildings with the national-level promotion. A practical connecting device that can synthesize all the serial processes is required to maximize the effect of construction material standardization. However, desired outcome of the standardization is not achieved yet because these serial standards and notification practices are decided by each part of the process and some are congested. In this study, we aim to improve a general organizational system of Korean Industrial Standard (KS) which is the most fundamental tool for the standardization of construction materials moving from a conventional idea that the standard is only for the material and components producers to a concept that can also be shared by the designers and construction workers. To achieve this, we propose an improvement plan for the Korean Industrial Standard in the perspective of three-tier classification system.

• 디지털융복합연구
• /
• 제14권2호
• /
• pp.519-527
• /
• 2016

이 연구는 BMI 분류기준과 9점-신체상평정척도 분류기준의 일치도를 조사하여 현장적용의 유용성을 확인하고, 여대생들이 체형에 대해 실제로 인식하고 정도를 파악하여 체형인식의 왜곡에 대한 올바른 정보와 비만의 기준에 대한 정보 제공에 목적이 있다. BMI 분류기준과 신체상평정척도 분류기준의 일치도, 그리고 여대생의 BMI에 따른 신체상 인식 정도를 알아보기 위하여 교차분석, Spearman의 등위차상관계수 및 카파통계량을 산출하였다. 분석결과 일반 여자대학생이 판정한 신체상 평정척도 분류기준과 BMI 분류기준은 통계적으로 ${\rho}=.719$(p<.001)로 높은 상관과 ${\kappa}=.506$(p<.001)로 보통 수준의 일치도를 나타냈다. 이러한 결과를 바탕으로 차후 신체상과 관련하여 인종의 특성에 따른 크기와 형태를 조정할 필요가 있으며 인구통계학적 특성이 다르거나 비만도가 높은 대상자를 선별하여 그들의 체형인식과 심리적인 측면에 관한 추가적인 연구가 필요하다.

• 방재기술
• /
• 통권15호
• /
• pp.22-27
• /
• 1993

The classification of hazardous area is a method of analysing and classifying the environment where explosive gas or vapour atmosphere may be expected to be present. The object of area classification is to enable the proper selection and installation of electical apparatus and other equipments. This report is intended to serve a general reference about the classification procedure of hazardous area with explanations of related Korean Standard.

• 기술혁신학회지
• /
• 제9권3호
• /
• pp.496-513
• /
• 2006

과학기술부는 국가 과학기술정보의 체계적인 수집, 분석 및 배포를 위해 국가차원에서 국가과학기술종합정보시스템(NTIS)을 구축하고 있다. 성공적인 NTIS의 추진을 위해서는 다양한 정보를 체계적으로 분류하고 유통시킬 수 있는 분류체계가 필요하다. 본 논문에서는 현재의 국가과학기술표준분류와 각 기관의 분류를 상호 연계하는 호환표를 사용하여 NTIS를 구축하는 것이 타당한지에 대하여 분석하였다. 분석결과 현행 분류체계를 이용하는 경우 정보의 유통이 원활하지 못한 것으로 나타나고 있으므로 성공적인 NTIS의 구축을 위해서는 새로운 분류체계가 고려될 필요가 있는 것으로 보인다.