• 대한치과교정학회지
• /
• 제43권1호
• /
• pp.42-52
• /
• 2013

The aim of this paper was to propose a new method of bimaxillary orthognathic surgery planning and model surgery based on the concept of 6 degrees of freedom (DOF). A 22-year-old man with Class III malocclusion was referred to our clinic with complaints of facial deformity and chewing difficulty. To correct a prognathic mandible, facial asymmetry, flat occlusal plane angle, labioversion of the maxillary central incisors, and concavity of the facial profile, bimaxillary orthognathic surgery was planned. After preoperative orthodontic treatment, surgical planning based on the concept of 6 DOF was performed on a surgical treatment objective drawing, and a Jeon's model surgery chart (JMSC) was prepared. Model surgery was performed with Jeon's orthognathic surgery simulator (JOSS) using the JMSC, and an interim wafer was fabricated. Le Fort I osteotomy, bilateral sagittal split ramus osteotomy, and malar augmentation were performed. The patient received lateral cephalometric and posteroanterior cephalometric analysis in postretention for 1 year. The follow-up results were determined to be satisfactory, and skeletal relapse did not occur after 1.5 years of surgery. When maxillary and mandibular models are considered as rigid bodies, and their state of motion is described in a quantitative manner based on 6 DOF, sharing of exact information on locational movement in 3-dimensional space is possible. The use of JMSC and JOSS will actualize accurate communication and performance of model surgery among clinicians based on objective measurements.

• 대한치과교정학회지
• /
• 제22권4호
• /
• pp.837-853
• /
• 1992

The purpose of this study was to investigate the positional changes of the mandibular condyles after orthognathic surgery In patients with severe skeletal Class III malocclusion. This study was based on 21 patients who had received bilateral sagittal split osteotomy for mandibular setback. Among them 14 were fixated non - rigidly (W group), and 7 were fixated rigidly (R group). After submental vertex view analysis, each subject was given the T.M.J. Tomogram in both centric occlusion and centric relation immediate before, $4\~6$ weeks after and more than 6 months after surgery. The anteroposterior and vertical changes between each time interval were measured and analyzed statistically. Following results were obtained. 1. There was no significant difference between right and left condyles in their anteroposterior and vertical changes of the condylar position. 2. In anteroposterior changes of condylar position of the wire fixation group, the condyles were moved anteriorly 4-6 weeks after surgery, and then the pattern of reestablishment to their preoperative position was observed more than 6 months after surgery. In the rigid fixation group, there was no significant difference in any observation periods of centric occlusion and centric relation. 3. In vertical changes of condylar position of the wire fixation group. the condyles were moved inferiorly 4-6 weeks after surgery, and then the pattern of reestablishment to their preoperative position was observed more than 6 months after surgery. In the rigid fixation group, the condyles were moved inferiorly 4-6 weeks after surgery, and then the pattern of reestablishment to their preoperative position was observed more than 6 months after surgery in centric occlusion only.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제36권4호
• /
• pp.154-160
• /
• 2014

Purpose: The efficiency of an anchor plate placed during orthognathic surgery via minimal presurgical orthodontic treatment was evaluated by analyzing the mandibular relapse rate and dental changes. Methods: The subjects included nine patients with Class III malocclusion who had bilateral sagittal split osteotomy at the Division of Oral and Maxillofacial Surgery, Department of Dentistry in Ajou University Hospital, after minimal presurgical orthodontic treatment. During orthognathic surgery, anchor plates were placed at both maxillary buttresses. The anchor plates were used to move maxillary teeth backward and for maximum anchorage of Class III elastics to minimize mandibular relapse during the postoperative orthodontic treatment. The lateral cephalometric X-ray was taken preoperatively (T0), postoperatively (T1), and one year after the surgery (T2). Seven measurements (distance from Pogonion to line Nasion-Nasion perpendicular [Pog-N Per.], angle of line B point-Nasion and Nasion-Sella [SNB], angle of line maxilla 1 root-maxilla 1 crown and Nasion-Sella [U1 to SN], distance from maxilla 1 crown to line A point-Nasion [U1 to NA], overbite, overjet, and interincisal angle) were taken. Measurements at T0 to T1 and T1 to T2 were compared and differences tested by standard statistical methods. Results: The mean skeletal change was posterior movement by $13.87{\pm}4.95mm$ based on pogonion from T0 to T1, and anterior movement by $1.54{\pm}2.18mm$ from T1 to T2, showing relapse of about 10.2%. There were significant changes from T0 to T1 for both Pog-N Per. and SNB (P<0.05). However, there were no statistically significant changes from T1 to T2 for both Pog-N Per. and SNB. U1 to NA that represents the anterior-posterior changes of maxillary incisor did not differ from T0 to T1, yet there was a significant change from T1 to T2 (P<0.05). Conclusion: This study found that the anchor plate minimizes mandibular relapse and moves the maxillary teeth backward during the postoperative orthodontic treatment. Thus, we conclude that the anchor plate is clinically very useful.

• 대한치과교정학회지
• /
• 제52권4호
• /
• pp.287-297
• /
• 2022

Objective: To investigate the pattern of accuracy change in artificial intelligence-assisted landmark identification (LI) using a convolutional neural network (CNN) algorithm in serial lateral cephalograms (Lat-cephs) of Class III (C-III) patients who underwent two-jaw orthognathic surgery. Methods: A total of 3,188 Lat-cephs of C-III patients were allocated into the training and validation sets (3,004 Lat-cephs of 751 patients) and test set (184 Lat-cephs of 46 patients; subdivided into the genioplasty and non-genioplasty groups, n = 23 per group) for LI. Each C-III patient in the test set had four Lat-cephs: initial (T0), pre-surgery (T1, presence of orthodontic brackets [OBs]), post-surgery (T2, presence of OBs and surgical plates and screws [S-PS]), and debonding (T3, presence of S-PS and fixed retainers [FR]). After mean errors of 20 landmarks between human gold standard and the CNN model were calculated, statistical analysis was performed. Results: The total mean error was 1.17 mm without significant difference among the four time-points (T0, 1.20 mm; T1, 1.14 mm; T2, 1.18 mm; T3, 1.15 mm). In comparison of two time-points ([T0, T1] vs. [T2, T3]), ANS, A point, and B point showed an increase in error (p < 0.01, 0.05, 0.01, respectively), while Mx6D and Md6D showeda decrease in error (all p < 0.01). No difference in errors existed at B point, Pogonion, Menton, Md1C, and Md1R between the genioplasty and non-genioplasty groups. Conclusions: The CNN model can be used for LI in serial Lat-cephs despite the presence of OB, S-PS, FR, genioplasty, and bone remodeling.

• 대한구순구개열학회지
• /
• 제7권1호
• /
• pp.63-76
• /
• 2004

Cleft lip and palate(CLP) patients usually have midface deficiency and Class III malocclusion. Distraction osteogenesis (DO) has been used recently to correct the maxillary hypoplasia with stable and predictable result. Both external and internal devices that permit midface distraction are available, This case report describes intraoral DO for correction of the midface deficiency in a adult CLP patient with relapse following orthognathic surgery. The purpose of this report is to present advantages of the intraoral DO for the treatment of CLP, The relative and potential clinical indications, treatment planning, patient preparation, and possible vector control for DO are discussed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권1호
• /
• pp.26-33
• /
• 2012

Purpose: The golden ratio has been used for a long time to objectify and quantify 'beauty'. Dr. Marqurardt claims that the golden ratio can be applied in the maxillofacial field as well. The purpose of this study was to evaluate the diagnostic significance of using a facial 'phi' mask for analyzing Korean faces with characteristics of Class I, II, and III malocclusion. Methods: We studied twenty five Korean celebrities' frontal facial photos (10 males, 15 females) and 90 malocclusion patients' frontal facial photos (30 patients in each malocclusion classification: Class I, Class II, and Class III). Patients who received orthodontic treatment at Samsung Medical Center were selected for this study. After superimposition of the selected facial photo and facial 'phi' mask using Adobe Photoshop CS3, the ratio of the entire facial area, mid facial area, lower facial area and horizontal and vertical lengths were measured. Results: The facial ratio in photos of Korean faces showed larger vertical and horizontal ratios than the facial 'phi' mask with golden ratio, regardless of skeletal malocclusion (entire face: 115%, lower face: 125% larger than the mask). The results of the frontal photos of Class I, II, and III malocclusion patients using facial 'phi' mask showed that the vertical length and frontal face area was more significantly influenced by the area of the lower face than the midface. This means that the lower face has larger proportions in the facial areas. Conclusion: The ratio of facial 'phi' mask is matched with the ideal facial appearance that the contemporary Korean general public is seeking. Thus, the facial 'phi' mask may be a convenient tool for esthetic analysis of Korean faces. Reducing the area of the lower face is esthetically more desirable for almost all Korean people when planning orthognathic surgery.

• 대한치과교정학회지
• /
• 제27권1호
• /
• pp.21-33
• /
• 1997

부산대학교병원 교정과에서 골격성 III급 부정 교합으로 진단되어 술전교정치료를 받고 악안면구강외과에서 악교정 수술을 받은 편악 수술군 18명과 양악 수술군 24명, 총 42명을 대상으로 초진, 수술 전, 수술 직후 및 수술 후 6개월 이상 경과 후에 채득한 측모두부방사선규격사진을 이용하여 분석하였다. 편악 수술군과 양악 수술군에서 치료과정에 따른 변화를 조사하여 악교정수술후 하악의 안정성에 영향을 미치는 요소를 알아보고자 분산분석을 기초로 하여 단계적 다중 희귀 분석을 시행하여 다음과 같은 결과를 얻었다. 1. 편악 수술군에서 수술에 의한 이동량, 하악전치 고경의 변화와 술전교정치료에 의한 하악평면각의 변화 및 하악전치의 경사도 변화가 악교정 수술후 하악의 안정성을 잘 설명하였고 결정계수는 0.84이었다. 2. 양악 수술군에서 수술에 의한 하악의 후방 이동량이 악교정 수술후 하악의 안정성을 설명하였고 결정계수는 0.28이었다.

• 대한치과교정학회지
• /
• 제54권4호
• /
• pp.247-256
• /
• 2024

Objective: This retrospective study evaluated the mandibular condyle position before and after bimaxillary orthognathic surgery performed with the mandibular condyle positioned manually in patients with mandibular prognathism using cone-beam computed tomography. Methods: Overall, 88 mandibular condyles from 44 adult patients (20 female and 24 male) diagnosed with mandibular prognathism due to skeletal Class III malocclusion who underwent bilateral sagittal split ramus osteotomy (BSSRO) and Le Fort I performed using the manual condyle positioning method were included. Cone-beam computed tomography images obtained 1-2 weeks before (T0) and approximately 6 months after (T1) surgery were analyzed in three planes using 3D Slicer software. Statistical significance was set at P < 0.05 level. Results: Significant inward rotation of the left mandibular condyle and significant outward rotation of the right mandibular condyle were observed in the axial and coronal planes (P < 0.05). The positions of the right and left condyles in the sagittal plane and the distance between the most medial points of the condyles in the coronal plane did not differ significantly (P > 0.05). Conclusions: While the change in the sagittal plane can be maintained as before surgery with manual positioning during the BSSRO procedure, significant inward and outward rotation was observed in the axial and coronal planes, respectively, even in the absence of concomitant temporomandibular joint disorder before or after the operation. Further long-term studies are needed to correlate these findings with possible clinical consequences.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권2호
• /
• pp.129-137
• /
• 2006

The treatment plan for orthognathic surgery must be based on accurate predictions, and this can be produced the most esthetic, functional and stable results. The purpose of this study was aimed to evaluate the amount and interrelationship of the gonial angle and the mandibular width change after the mandibular setback surgery in the mandibular prognathic patients. Twenty patients were selected who received orthognathic surgery after presurgical orthodontic treatment. The patients with skeletal and dental Class III malocclusion were operated upon with bilateral sagittal split ramus osteotomy and mandibular setback. The lateral and posteroanterior cephalometric radiographs were taken preoperatively, postoperative 1 day and 12 months later after the orthognathic surgery, and then the gonial angle and mandibular width were measured. The computerized statistical analysis was carried out with SPSS/PC program. The gonial angle at postoperative 1 day was decreased about $5.3^{\circ}$ than preoperative value and the gonial angle at postoperative 12 months was increased about $1.4^{\circ}$ than postoperative 1 day. So the gonial angle at postoperative 12 months was decreased about $3.9^{\circ}$ than preoperative value. The mean preoperative gonial angle was $125.35^{\circ}{\pm}7.36$, showing significantly high value than normal and mean gonial angle at postoperative 12 months was $121.45^{\circ}{\pm}6.81$, showing value near to normal. The mandibular width at postoperative 1 day was decreased about 1.1 mm than preoperative value and the mandibular width at postoperative 12 months was more decreased about 1.7 mm than postoperative 1 day. So the mandibular width at postoperative 12 months was decreased about 2.8 mm than preoperative value. These results indicate that sagittal split ramus osteotomy in mandibular prognathic patients with high gonial angle is effective to improvement of gonial angle. It is considered to be helpful for maintenance of postoperative stable gonial angle area that detailed postoperative care and follow-up.

• 대한치과교정학회지
• /
• 제46권1호
• /
• pp.42-54
• /
• 2016

The aim of this clinical report is to describe the complex treatment of an adult Class III malocclusion patient who was disappointed with the outcome of a previous oral rehabilitation. Interdisciplinary treatment planning was performed with a primary indication for implant removal because of marginal bone loss and gingival recession, followed by orthodontic and surgical procedures to correct the esthetics and skeletal malocclusion. The comprehensive treatment approach included: (1) implant removal in the area of the central incisors; (2) combined orthodontic decompensation with mesial displacement and forced extrusion of the lateral incisors; (3) extraction of the lateral incisors and placement of new implants corresponding to the central incisors, which received provisional crowns; (4) orthognathic surgery for maxillary advancement to improve occlusal and facial relationships; and finally, (5) orthodontic refinement followed by definitive prosthetic rehabilitation of the maxillary central incisors and reshaping of the adjacent teeth. At the three-year follow-up, clinical and radiographic examinations showed successful replacement of the central incisors and improved skeletal and esthetic appearances. Moreover, a Class II molar relationship was obtained with an ideal overbite, overjet, and intercuspation. In conclusion, we report the successful esthetic anterior rehabilitation of a complex case in which interdisciplinary treatment planning improved facial harmony, provided gingival architecture with sufficient width and thickness, and improved smile esthetics, resulting in enhanced patient comfort and satisfaction. This clinical case report might be useful to improve facial esthetics and occlusion in patients with dentoalveolar and skeletal defects.