• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.42.1-42.1
• /
• 2016

The formation process and the dynamical properties of a large-scale quasi-circular flare ribbon were investigated using the SDO AIA and HMI data along with data from RHESSI and SOT. Within one hour time interval, two subsequent M-class flares were detected from the NOAA 12371 that had a ${\beta}{\gamma}{\delta}$ configuration with one bipolar sunspot group in the east and one unipolar spot in the west embedded in a decayed magnetic field. Earlier M2.0 flare was associated with a coronal loop eruption, and a two-ribbon structure formed within the bipolar sunspot group. On the other hand, the later M2.6 flare was associated with a halo CME, and a quasi-circular ribbon developed encircling the full active region. The observed quasi-circular ribbon was strikingly large in size spanning 650" in north-south and 500" in east-west direction. It showed the well-known sequential brightening in the clockwise direction during the decay phase of the M2.6 flare at the estimated speed of 160.7 km s-1. The quasi-circular ribbon also showed the radial expansion, especially in the southern part. Interestingly, at the time of the later M2.6 flare, the third flare ribbon parallel to the early two-ribbon structure also developed near the unipolar sunspot, then showed a typical separation in pair with the eastern most ribbon of the early two ribbons. The potential field reconstruction based on the PFSS model showed a fan shaped magnetic configuration including fan-like field lines stemming from the unipolar spot and fanning out toward the background decayed field. This large-scale fan-like field overarched full active region, and the footpoints of fan-like field lines were co-spatial with the observed quasi-circular ribbon. From the NLFF magnetic field reconstruction, we confirmed the existence of a twisted flux rope structure in the bipolar spot group before the first M2.0 flare. Hard X-ray emission signatures were detected at the site of twisted flux rope during the pre-flare phase of the M2.0 flare. Based on the analysis of both two-ribbon structure and quasi-circular ribbon, we suggest that a tether-cutting reconnection between sheared arcade overarching the twisted flux rope embedded in a fan-like magnetic field may have triggered the first M2.0 flare, then secondary M2.6 flare was introduced by the fan-spine reconnection because of the interaction between the expanding field and the nearby quasi-null and formed the observed large-scale quasi-circular flare ribbon.

• Journal of Life Science
• /
• v.14 no.4
• /
• pp.683-688
• /
• 2004

A bacteriocin-producing lactic acid bacteria was isolated from Kimchi on MRS selective media with the use of Lactobacillus delbrueckii subsp. delbrueckii as an indicator strain. The strain YH-10 was identified as Lactococcus lactis subsp. lactis through the API test. The crude bacteriocin (freeze-dried 50% ammonium sulfate precipitate of culture supernatant) produced by the strain was named as lacticin YH-10. Lacticin YH-10 showed the growth inhibitory activity against Gram positive pathogenic bacteria and other lactic acid bacteria. The bacteriocin was inactivated by proteases such as protamex and aroase AP-10 and partially inactivated by amylase, proteinase K, trypsin, and papain. The lacticin YH-10 remained its activity with the treatment of heat at 10$0^{\circ}C$ for 60 min or the changes of pH 2 to 11. However, the activity was lost at high pH combined with the exposure to 10$0^{\circ}C$. The bacteriocin production of the strain was started in the exponential phase and stopped in the stationary phase. The approximate molecular mass of the bacteriocin produced by the strain was approximate 14 kDa in the analysis on SDS-PAGE.

• Journal of Korean Medicine Rehabilitation
• /
• v.21 no.2
• /
• pp.63-85
• /
• 2011

Objectives : This study was carried out to know the effects of Danggwisayeokgaohsuyusaenggang-tang(hereinafter referred to DST) on arthritis induced by collagen on DBA/1 OlaHsd mice. Methods : For this purpose, DST was orally administered to mouse with arthritis induced by collagen II. Cytotoxicity, high performance liquid chromatograph(HPLC) analysis, arthritis index, value of immunocyte in draining lymph node and paw joint, cytokine were measured in vivo. Results : 1. The cytotoxicity against human fibroblast cells(hFCs) was not measured in any concentration. 2. In HPLC analysis, There are high peak patterns at 8 minute(min), 12 min, 35 min, 45 min. 3. The arthritis index was decreased significantly. 4. The degree of arthritis induced damage of joint of DST group is slight compared with control group in histopathologic observation(Hematoxylin and eosin stain(H&E), Masson's trichrome(M-T) staining). 5. In total cell counts of draining lymph node(DLN) and paw joint, the cells in DLN decreased significantly on DST 200 mg/kg and the cells in paw joint decreased significantly on 200 mg/kg and 50 mg/kg. 6. In DLN, $CD4^+/CD25^+$, $CD3^+/CD69^+$, major histocompatibility complex(MHC), class-II/$CD11c^+$ cells decreased significantly on DST 200 mg/kg and 50 mg/kg $CD3^+/CD8^+$ cells decreased significantly on DST 200 200 mg/kg, $CD4^+$, $CD3^+/CD44^+$ cells decreased. 7. In paw joints, $CD4^+$, $CD11b^+/Gr-1^+$ cells decreased significantly on DST 200 mg/kg and 50 mg/kg. 8. In joints, levels of $IL-1{\beta}$, IL-6, $TNF-{\alpha}$, cyclo-oxygenase-2(COX-2), NOS-II were decreased on DST 200 mg/kg and DST 50 mg/kg. 9. In analysing of cytokine in CD3/CD28 activated spleen, IL-17 was decreased significantly, IL-4 was increased significantly $INF-{\gamma}$ was decreased on DST 200 mg/kg. 10. In analysing of cytokine in collagen activated spleen, IL-17 were decreased significantly, IL-4 was increased significantly. Conclusions : This results demonstrated that DST suppressed the inflammatory progression of collagen-induced arthritis(CIA) mice and supported further studies are required to survey continuously in looking for the effective substance and mechanism in the future.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.1
• /
• pp.69-87
• /
• 2003

Background : LB20304(gemifloxacin) is a new fluoroquinolone antibacterial agent with excellent activity against both Gram-negative and Gram-positive organisms. In vitro studies using clinical isolates have shown gemifloxacin to be highly active against penicillin-resistant strains of S. pneumoniae and in contrast to other reference quinolones, gemifloxacin retained good activity against clinical isolates of S. pneumoniae that were resistant to other members of the quinolone class. Therefore, gemifloxacin is thought to be effective in treating acute bacterial exacerbation of chronic bronchitis(AECB). The objective of this study was to evaluate the efficacy and safety of oral gemifloxacin at doses of 160mg or 320mg once daily for 7 days for the treatment of AECB in Korean adult population. Methods : This was a randomized, multicenter, double-blind, parallel group Phase II study to assess the clinical and antibacterial efficacy and safety of oral gemifloxacin for the treatment of AECB. Treatment Group A (67 patients) took oral gemifloxacin 160mg once daily for seven days and treatment Group B (70 patients) took oral gemifloxacin 320mg once daily for seven days. Results : The demographic profiles of the two treatment groups were similar. The clinical response at follow-up was 84.2% in the gemifloxacin 160-mg group, and 88.7% in the gemifloxacin-320 mg group, showing no statistically significant difference between two treatment groups(p=0.49). The clinical response at the end of therapy was 96.5% in the 160-mg group, and 96.4% in the 320-mg group. The bacteriological response at the end of therapy and follow-up were 81.8% and 78.9%, respectively, in the 160-mg group, and 86.4% and 84.2%, respectively, in the 320-mg group, showing no statistically significant difference between two treatment groups(p=0.68 and 0.68, respectively). S. pneumoniae(12 isolates) and H. influenzae(10 isolates) were the most prevalent pathogens. The MICs were lower for gemifloxacin than other quinolones against these key pathogens, and for S. pneumoniae, the MICs for gemifloxacin were considerably lower(${\leq}0.03$ ug/mL) than those for other quinolones, beta-lactams and macrolides. In the period on-therapy plus 30 days post-therapy, a total of 18 patients(26.9%) in the gemifloxacin 160mg group and 22 patients(31.4%) in the 320mg group reported at least one adverse event(AE). The most frequently reported AE was abdominal pain(3/67 patients, 4.5%) in the gemifloxacin 160mg group and increased level of hepatic enzyme(5/70 patients, 7.1%) in the 320mg group. The overall AE profiles for the two treatment groups were similar. Two out of 67 patients(3.0%) in the gemifloxacin 160mg group and 1/70 patients(1.4%) in the 320mg group reported at least one serious AE, however, none of which was considered by the investigator to be of suspected or probable relationship to study medication. Conclusion : The results of this study showed that gemifloxacin at doses of 160mg or 320mg once daily for 7 days in the treatment of acute exacerbations of chronic bronchitis(AECB) in adult Koreans was a very effective and safe treatment both clinically and bacteriologically.

• Korean Journal of Clinical Laboratory Science
• /
• v.48 no.3
• /
• pp.217-224
• /
• 2016

Acinetobacter baumannii (A. baumannii) is prevalent in hospital environments and is an important opportunistic pathogen of nosocomial infection. It is known that this pathogen cause herd infection in hospitals, and the mortality rate is remarkably higher for patients infected with this pathogen and already have other underlying diseases. Herein, we investigated the antibiotic resistance rate and the type of resistance genes in 85 isolates of multi-drug resistant A. baumannii from the samples commissioned to laboratory medicine in two university hospitals-in hospital A and hospital B-located in Cheonan and Chungcheong provinces, respectively, in Korea. As a result, $bla_{OXA-23-like}$ and $bla_{OXA-51-like}$ were detected in 82 stains (96.5%). These 82 strains of $bla_{OXA-23-like}$ producing A. baumannii were confirmed with the ISAba1 gene found at the top of the $bla_{OXA-23-like}$ genes by PCR, inducing the resistance against carbapenemase. The armA, AME gene that induces the resistance against aminoglycoside was detected in 34 strains out of 38 strains from Hospital A (89.5%), and in 40 strains out of 47 strains from Hospital B (85.1%), while AMEs were found in 33 strains out of 38 strains from Hospital A (70.2%) and in 44 strains out of 47 strains in Hospital B (93.6%). Therefore, it was found that most multi-drug resistant A. baumannii from the Cheonan area expressed both acethyltransferase and adenyltransferase. This study investigated the multi-drug resistant A. baumannii isolated from Cheonan and Chungcheong provinces in Korea, and it is thought that the results of the study can be utilized as the basic information to cure multi-drug resistant A. baumannii infections and to prevent the spread of drug resistance.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.1-33
• /
• 1997

The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.