• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.33-40
• /
• 2006

The characteristics of the aluminum waste melting and the distribution of the radioactive nuclides have been investigated for the estimation on the volume reduction and the decontamination of the aluminum wastes from the decommissioning of the TRIGA MARK it and III research reactors at the Korea Atomic Energy Research Institute(KAERI). The aluminum wastes were melted with the use of the fluxes such as flux $A:NaCl-KCl-Na_3AlF_6$, flux B:NaCl-NaF-KF, flux $C:CaF_2$, and flux $D:LiF-KCl-BaCl_2$ in the DC graphite arc furnace. For the assessment of the distribution of the radioactive nuclides during the melting of the aluminum, the aluminum materials were contaminated by the surrogate nuclides such as cobalt(Co), cesium(Cs) and strontium(Sr). The fluidity of aluminum melt was increased with the addition of the fluxes, which has slight difference according to the type of fluxes. The formation of the slag during the aluminum melting added the flux type C and D was larger than that with the flux A and B. The rate of the slag formation linearly increased with increasing the flux concentration. The results of the XRD analysis showed that the surrogate nuclide was transferred to the slag, which can be easily separated from the melt and then they combined with aluminum oxide to form a more stable compound. The distribution ratio of cobalt in ingot to that in slag was more than 40% at all types of fluxes. Since vapor pressures of cesium and strontium were higher than those that of the host metals at the melting temperature, their removal efficiency from the ingot phase to the slag and the dust phase was by up to 98%.

• Korean Journal of Plant Resources
• /
• v.36 no.5
• /
• pp.517-526
• /
• 2023

The harvest time of the late-ripening 'Fuji' apple (Malus × domestica) is variable, depending on the coloration of the fruit skin. Ethephon, a plant growth regulator, promotes the ethylene production and induces physiological responses associated with fruit maturation in climacteric fruit crops, such as apples. This study aimed to investigate the effect of ethephon treatment on fruit characteristics after fruit enlargement, with the objective of proposing an economical and stable harvest control method for 'Fuji'/M.26 apples. Fruit characteristics were assessed at 10-days intervals following the application of 100 mg/L ethephon and mixture of 100 mg/L ethephon and 0.5% CaCl₂ at 145 days after full bloom (DAFB). Starch contents of ethephon-treated (ET) and ethephon with CaCl₂-treated (EC) apples began to decrease from 155 DAFB, and the starch contents of ET and EC at 10 days before harvest were similar to those of control at harvest time. Red coloration of fruit skin in EC was lower compared to ET but higher than control. The average fruit firmness was low in ET, while the control and EC exhibited similar levels of firmness. Fruit sugar acid ratios did not show significant differences between treatments. However, the titratable acidity of EC was significantly lower than that of the control at 10 days before harvest. Moreover, fruit sugar acid ratio of ET and EC at 10 days before harvest in 2021 was similar to their sugar acid ratio at harvest time. Therefore, it was thought that fruit maturation and skin coloration could be accelerated by 10 days from the harvest time through the combined treatment of 100 mg/L ethephon and 0.5% CaCl₂ at the end of fruit enlargement in 'Fuji'/M.26.

• Journal of Korea Foresty Energy
• /
• v.17 no.1
• /
• pp.56-70
• /
• 1998

This study was carried out to investigate the structural characteristics of kraft lignin and the wood degrading characteristics, the productivity of ligninolytic enzymes and the enzymatic degradation of kraft lignin by white-rot fungi. To purify kraft lignin, precipitation of kraft pulping black liquors of pitch pine meal was done by titration with lN $H_{2}SO_{4}$ reaching to pH 2, and isolation of the precipitates done by centrifugation. The isolated precipitates from pitch pine were redissloved in lN NaOH, reprecipitated by titration with lN $H_{2}SO_{4}$, washed with deionized water, and kept ofr analysis after freeze drying. Fractionation of the precipitates in solution by successive extraction with $CH_{2}Cl_{2}$ and MeOH, and the fractionates were named SwKL, SwKL I, SwKL II, and SwKL III for pitch pine kraft lignin. The more molecular weights of kraft lignin increased, the less phenolic hydroxyl groups and the more aliphatic hydroxyl groups. Because as the molecular weights increased, the ratio of etherified guaiayl/syringyl(G/S ratio) and the percentage were increased. The spectra obtained by 13C NMR and FTIR assigned by comparing the chemical shifts of various signals with shifts of signals from autherized ones reported. The optimal growth temperature and pH of white-rot fungi in medium were $28^{\circ}C$ and 4.5-5.0, respectively. Especially, in temperature and pH range, and mycelial growth, the best white-rot fungus selected was Phanerochaete chrysosporium for biodegradation. For the degradation pathways, the ligninolytic fungus jcultivated with stationary culture using medium of 1% kraft lignin as a substrate for 3 weeks at $28^{\circ}C$. The weight loss of pitch pine kraft lignin was 15.8%. The degraded products extracted successively methoanol, 90% dioxane and diethyl ether. The ether solubles were analyzed by HPLC. Kraft lignin degradation was initiated in $\beta$-O-4 bonds of lignin by the laccase from Phanerochaete chrysosporium and the degraded compounds were produced from the cleavage of $C\alpha$-$C\beta$ linkages at the side chains by oxidation process. After $C\alpha$-$C\beta$ cleavage, $C\alpha$-Carbon was oxidized and changed into aldehyde and acidic compounds such as syringic acid, syringic aldehyde and vanilline. And the other compound as quinonemethide, coumarin, was analyzed. The structural characteristics of kraft lignin were composed of guaiacyl group substituted functional OHs, methoxyl, and carbonyl at C-3, -4, and -5 and these groups were combinated with $\alpha$ aryl ether, $\beta$ aryl ether and biphenyl. Kraft lignin degradation pathways by Phanerochaete chrysosporium were initially accomplished cleavage of $C\alpha$-$C\beta$ linkages and $C\alpha$ oxidation at the propyl side chains and finally cleavage of aromatic ring and oxidation of OHs.

• Journal of the Korea Concrete Institute
• /
• v.28 no.3
• /
• pp.299-308
• /
• 2016

This paper presents an investigation of the mechanical and microstructural properties on hardened samples that were synthesized using blended binder(fly ash(FA) and blast furnace slag cement(BFSC)), alkali activator and sea water or distilled water. Binders were prepared by mixing the FA and BFSC in different blend weight ratios of 6:4, 7:3 and 8:2. Sodium hydroxide and sodium silicate were used 5 wt% of binder, respectively, as an alkaline activator. The compressive strength and absorption were measured at the age of 3, 7 and 28 days, and the XRD, TGA and MIP tests were performed at the age of 28 days. An increase in the content of BFSC leads to an increase in the quantities of ettringite and C-S-H formed, regardless of the type of mixing water. And it also shows higher strength due to the reduction of pores larger than ~50 nm. All hardened samples in this study have common hydration products of C-S-H, $Ca(OH)_2$ and calcite. Hydrocalumite of all reaction products formed was only present in hardened sample mixed with sea water. For each FA/BFSC mixing ratio, the compressive strength of hardened sample mixed with sea water was similar to that mixed with distilled water. It is proposed that the slight increase of strength of samples mixed with sea water is mainly due to the presence of hydrocalumite phase containing chlorine ion, contributing to the change of total porosity and pore size distribution in samples.

• Korean Journal of Soil Science and Fertilizer
• /
• v.13 no.3
• /
• pp.77-83
• /
• 1981

In order to obtain an imformation on the exchangeable potassium and it's activity ratio to other cations in wet paddy top soil grown by rice, soil samples were taken from bottomless middle size (60cm in dia, and height, respectively) round concrete pot being car ride out with an experiment on the split application of potassium in relation to lime and analysed. The pot experiment was being conducted from 1974 at a farm of the City University of Seoul and the wet soil samples were taken from the paddy in the year of 1976. The samples were extracted with $0.1N-AlCl_3$ solution and analysed regarding the elements. Results obtained are as follows : 1. Less exchangeable potassium was extracted from the soils limed than those unlimed when the same amount of potassium was applied immediatly after flooding. However, when the Potassium was applied two weeks after flooding, the reverse was observed. The fact that the exchangeable potassium is increased in the case that potassium fertilizer applied two weeks after flooding explained as due either to the prohibiting effect of iron or less abserption of potassium by the crop. 2. A remarkable decrease of exchangeable potassium of soils was observed during the vigorous growth stage of rice. 3. The activity ratio of $\frac{K}{(Fe^{{+}{+}}){\frac{1}{2}}}$ was remarkabley low after July 16th at which the soil was considerably reduced. 4. The activity ratio $\frac{K^+}{NH^+}$ of limed soil lasted highly until July 16th. It may be resulted from slow progress of ammonification caused by high pH. 5. A positive correlation was found between $Fe^{{+}{+}}$ and $Ca^{{+}{+}}$ under reduced condition. But there was no correlation between $Fe^{{+}{+}}$ and $K^+$ or $NH^+_4$, because that the concentrations of $K^+$ and $NH^+_4$ in soil fluctuates during growing season.

• Journal of the Korean Society of Radiology
• /
• v.2 no.3
• /
• pp.11-18
• /
• 2008

In this study, the particle properties and luminescence properties of Gd2O3 nano powder with various Eu content were studied. Gd2O3:Eu nano powder was fabricated using special solvent which mixed the alcohol and the distilled water at specific ratio. This solvent by the solution method showed short fabrication time because solution time of Gd and Eu was reduced. From this experiment with Gd2O3:Eu, the particle properties og nano powder phosphor way analysed using SEM (scanning electron microscope) and EDX(Energy Dispersive X-ray). Also the luminescence properties of nano powder was measured using PL(Photoluminescence) and CL (CathodeLuminescence). The size of powder was 30nm~40nm. The magnitude of powder showed the best peak at 620nm. Among 1,3,5wt% of Eu content, the more Eu content was added in powder, the more photons wre generated. Also it shows luminescence efficiency was improved adding 5% of Eu content.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.4
• /
• pp.38-52
• /
• 2011

Sorption and sequential desorption experiments were conducted for Zn using a natural soil (NS) in background status by aging (1, 30 and 100 days). The sorption isotherm showed that Zn had high sorption capacity but low sorption affinity in NS. Sequential desorption was biphasic with appreciable amount of sorbed Zn residing in the desorption-resistant fraction after several desorption steps. The biphasic desorption behavior of Zn was characterized by a biphasic desorption model that includes a linear term to represent labile or easily-desorbing fraction and a Langmuirian-type term to represent desorption-resistant fraction. The biphasic desorption model indicated that the size of the maximum capacity of desorption-resistant fraction ($q^{irr}_{max}$) increased with aging in NS. Desorption kinetics and desorption-resistance of Zn in the soils collected from mine tailings (MA, MB and MC collected from surface, subsurface soils and mine waste, respectively) were investigated and compared to the bioavailability to earthworm (Eisenia fetida). Desorption kinetic data of Zn were fitted to several desorption kinetic models. The ratio ($q_{e,d}/q_0$) of remaining Zn at desorption equilibrium ($q_{e,d}$) to initial sorbed concentration ($q_0$) was in the range of 0.53~0.90 in the mine tailings which was higher than that in NS, except MA. The sequential desorption from the mine tailings with 0.01M Na$NO_3$ and 0.01M $CaCl_2$ showed that appreciable amounts of Zn are resistant to desorption due to aging or sequestration. The SM&T (Standard Measurements and Testing Programme of European Union) analysis showed that the sum of oxidizable (Step III) and residual (Step IV) fractions of Zn was linearly related with its desorption-resistance ($q^{irr}_{max}$) determined by the sequential desorption with 0.01M Na$NO_3$ ($R^2$= 0.9998) and 0.01M $CaCl_2$ ($R^2$= 0.8580). The earthworm uptake of Zn and the desorbed amount of Zn ($q_{desorbed}$ = $q_0-q_{e,d}$) in MB soil were also linearly related ($R^2$ = 0.899). Our results implicate that the ecological risk assessment of heavy metals would be possible considering the relation between desorption behaviors and bioavailability to earthworm.

• Korean Journal of Soil Science and Fertilizer
• /
• v.23 no.2
• /
• pp.114-118
• /
• 1990

Water requirement for desalinization was studied in column experiment filled with a tidal saline soil treated with gypsum partially, one half of the gypsum was mixed to the top one tenth and the other half was spread on the surface of the column soil. Different doses of percolates were collected and analysed with sectionalized column soils after the last percolation. Results obtained are as follows ; 1. One point seven(1.7) times of percolate was enough to desaline sodium from the tidal saline soil to bring the activity ratio of $Na/{\sqrt{Ca+Mg)}}$ to 0.10 at which the mean % Na to the sum of cations was $1.64{\pm}0.57$, but for magnessium, twice as much the percalate as the saline soil was still not enough, so that the activity ratios, $(Na+{\sqrt{Mg}})/(K+{\sqrt{Ca}})$ of soil, at different depth were not contract to an equilibrium point. 2. Most free NaCl was washed out into 1.4 times of percolate to the saline soil There after which the leaching of K and Mg became obvious. 3. Iso ha lime curves of sodium were prepared for water requirement to desaline a tidal saline soil to a projected Na concentration and a predetermined soil depth.

• Applied Biological Chemistry
• /
• v.43 no.4
• /
• pp.241-246
• /
• 2000

In order to investigate structural properties of Chindo black rice(grown in Chindo, Chonnam) starch and its amylopectin, Chindo black rice was investigated in comparison to Shinsun waxy rice. The maximum absorbance wave and intrinsic viscosity of Chindo black rice starch and Shinsun waxy rice starch were 523 nm, 521 nm and 183 ml/g, 178 ml/g, respectively. ${\beta}-amylolysis$ limit(%) of Chindo black rice and Shinsun waxy rice starch were 62.8% and 60.3%, respectively. Chindo black rice was determined to be a waxy rice due to the results of iodine reaction and elution profile on Sephroce CL-2B. The chain of amylopectins in Chindo black rice distributed fraction 1$(F_1)$ of above degree of polymerization$({\overline{DP}})$ 55, fraction 2$(F_2)$ of ${\overline{DP}} $40{\sim}50$ and fraction 3$(F_3)$ of ${\overline{DP}} $15{\sim}20$, and the ratio of $F_3$ to $F_2$ for Chindo black rice was higher than that for Shinsun waxy rice. The super long chain of amylopectin in Chindo black rice was consisted much more than that of Shinsun waxy rice. ${\beta}-limit$ dextrins in Chindo black rice amylopectin distributed $F_1$ of above ${\overline{DP}} 55, $F_2$ of ${\overline{DP}} $30{\sim}45$ and $F_3$ of ${\overline{DP}} $10{\sim}20$. Little difference was shown between elution patterns of the pullulanase treated ${\beta}-limit$ dextrins of Chindo black rice amylopectin and Shinsun waxy rice amylopectin. These results suggest that Chindo black rice starch was similar to Shinsun waxy rice starch.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.787-792
• /
• 2010

It is necessary to predict the penetration of chloride ions for designing RC construction in marine environments. However, it takes a long time to obtain chloride migration coefficients. Therefore, the rapid chloride penetration test (RCPT) is generally used to shorten the test time. But there is a difference between chloride migration coefficients determined by rapid chloride penetration tests and those based on exposure in marine environments. In this study, we evaluated the effect on the chloride ion migration coefficient caused by a change in voltage and NaCl concentration. We also compared the relationship between the chloride ion migration coefficient by RCPT and that by exposure in marine environments. As a result of the experiments, we found that there is only a small change in the experimental factors based on changes in voltage and NaCl concentration and since they are so small, we can conclude that they are in the range of experimental error and test results from chloride ion migration coefficients by RCPT and exposure were very different from each other. In the exposure experiments, when the water-cement ratio was increased, the smaller fine air gaps in concrete affected the chloride ion migration coefficient.