• 한국대기환경학회지
• /
• 제30권6호
• /
• pp.545-554
• /
• 2014

In general, odorant was added to fuel gases, such as LPG, LNG and city gas, to prevent gas poisoning, ignition, explosion, or other accident caused by fuel gases, and to enable immediate and easy detection of fuel-gas leakage by emitting an offensive smell. This study describes a study on the exhaust emissions characteristics and fuel economy of liquefied petroleum gas (LPG) vehicle using LPG fuel with new sulfur free odorant. New sulfur free odorant was added to LPG to reduce sulfur content of the LPG. Its performance and exhaust emission were compared to those of LPG with sulfur containing odorant (EM, ethyl mercaptan). Engine performance using LPG with sulfur free odorant was similar to that with sulfur-containing odorant. Exhaust emissions from the LPG vehicle with LPG including sulfur free odorant were also similar to those with LPG including sulfur containing odorant in the FTP 75 and NEDC mode. There experimental results suggest that the sulfur free odorant may substitute for the sulfur containing odorant in LPG fuel.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1637-1641
• /
• 2003

Korea Gas Corporation(KOGAS) is a Liquified Natural Gas(LNG) supplier through out the Korea. LNG, which is imported wholly from foreign countries, is compressed 1/600 for easy transportation and is stored in a liquid state in the storage tanks at Incheon, Pyeongtaek and Tongyeong. At LNG receiving terminals, LNG is vaporized to natural gas before supplying to City Gas Consumer of Power Plant. The secondary pump is a equipment which compress LNG from 1- kgf/cm2 to 70 kgf/cm2. The secondary pump at Tongyeong LNG receiving terminal is consisted of two pumps in one underground PIT, and is connected to supporting structures. It is therefore expected that there is a vibration problem whit the pump and was found that high level vibration was occurred in a low frequency band($5^{\sim}10Hz$). In this paper, the vibration of secondary pump was analyzed, and the main cause of vibration was found out.

• 한국가스학회지
• /
• 제23권2호
• /
• pp.9-16
• /
• 2019

울산, 여주 등 산업단지의 고압매설배관에서 발생할 수 있는 굴착공사 등 타 공사로 인한 중대사고의 발생빈도를 도시가스 매설 배관과 비교하여 FTA에 의해 기초사상(Basic event)을 도출하여 제시한다. 또한 굴착빈도, 순찰주기 등 배관손상 영향 인자를 관찰 및 분석하고, 이들 인자의 중요도와 민감도를 Risk 비교분석을 통해 구해봄으로써 고압가스매설배관의 안전성 향상에 기여한다.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1775-1782
• /
• 2023

Several reactor physics commissioning experiments were conducted to obtain the neutronic parameters at the beginning of the G.A. Siwabessy Multi-purpose Reactor (RSG-GAS) operation. These parameters are essential for the reactor to safety operate. Leveraging the experimental data, this study evaluated the calculated core reactivity, control rod reactivity worth, integral control rod reactivity curve, and fuel reactivity. Calculations were carried out with Serpent 2 code using the latest neutron cross-section data ENDF/B-VIII.0. The criticality calculations were carried out for the RSG-GAS first core up to the third core configuration, which has been done experimentally during these commissioning periods. The excess reactivity for the second and third cores showed a difference of 510.97 pcm and 253.23 pcm to the experiment data. The calculated integral reactivity of the control rod has an error of less than 1.0% compared to the experimental data. The calculated fuel reactivity value is consistent with the measured data, with a maximum error of 2.12%. Therefore, it can be concluded that the RSG-GAS reactor core model is in good agreement to reproduce excess reactivity, control rod worth, and fuel element reactivity.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제24권4호
• /
• pp.11-19
• /
• 2019

This paper examines an assessment method for terminating the post-closure maintenance of a landfill using a simplified landfill gas model. The case study site is the Sudokwon Landfill in Incheon city, which was closed in 2000. The deviations of the results obtained by the regular model and the simplified model were both slightly over 10% from the measured data. Also, the deviation of the simplified model from the regular model has been less than 5% since 2005. Thus, the simplified model could be applied to other landfills that have been closed for at least 5 years. Additionally, the results of the mass balance analysis using the simplified landfill gas model indicated that 39% of the organic carbon was discharged, leading to organic carbon and organic matter content of 7.2 and 17.6%, respectively, in the landfill by the end of 2018.

• 센서학회지
• /
• 제3권1호
• /
• pp.12-18
• /
• 1994

본 연구에서는, calorimetric 형 흐름센서 소자를 미세가공된 실리콘 구조상에 제작하고 그 특성을 평가하였다. 기체의 흐름을 통한 냉각효과 및 가열효과를 가열저항을 중심으로 양측에 배열된 두개의 온도센서로 측정하였으며 절연박막 다이아프램을 기판으로 사용하여 열적절연효과를 향상시켰다. 제작된 흐름센서는 $0{\sim}0.25grs/min$의 질소가스의 흐름 범위 내에서, 10V의 브릿지 인가전압에 대해 $0{\sim}378.4mV$의 출력전압을 발생하였으며, 센서가 동작 영역에 이르는 시간은 10초 내외로 나타났다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.57-60
• /
• 2008

KEPRI has studied planar type SOFC stacks using anode-supported single cells and kW class co-generation systems for residential power generation. A 1kW class SOFC system consisted of a hot box part, a cold BOP part and a water reservoir. A hot box part contains a SOFC stack made up of 48 single cells and ferritic stainless steel interconnectors, a fuel reformer, a catalytic combustor and heat exchangers. Thermal management and insulation system were especially designed for self-sustainable operation. A cold BOP part was composed of blowers, pumps, a water trap and system control units. When a 1kW class SOFC system was operated at $750^{\circ}C$ with hydrogen after pre-treatment process, the stack power was 1.2kW at 30 A and 1.6kW at 50A. Turning off an electric furnace, the SOFC system was operated using hydrogen and city gas without any external heat source. Under self-sustainable operation conditions, the stack power was about 1.3kW with hydrogen and 1.2kW with city gas respectively. The system also recuperated heat of about 1.1kW by making hot water.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술대회 논문집 전문대학교육위원
• /
• pp.75-78
• /
• 2003

Energy distribution function for electrons in $SF_6$-Ar mixtures gas used by MCS-BEq algorithm has been analysed over the E/N range $30\sim300$[Td] by a two term Boltzmann equation and by a Monte Carlo Simulation using a set of electron cross sections determined by other authors, experimentally the electron swarm parameters for 0.2[%] and 0.5[%] $SF_6$-Ar mixtures were measured by time-of-flight(TOF) method. The results show that the deduced electron drift velocities, the electron ionization or attachment coefficients, longitudinal and transverse diffusion coefficients and mean energy agree reasonably well with theoretical for a rang of E/N values. The transport coefficients for electrons in (0.2[%])$SF_6$-Ar and (0.5[%]$SF_6$ - Ar mixtures were measured by time-of-flight method, and the electron energy distribution function and the parameters of the velocity and the diffusion were determined by the variation of the collision cross-sections with energy. The results obtained from Boltzmann equation method and Monte Carlo simulation have been compared with present and previously obtained data and respective set of electron collision cross sections of the molecules.

• Spatial Information Research
• /
• 제4권2호
• /
• pp.181-187
• /
• 1996

본 연구의 목적은 다양한 도시하부시설물 중 도시가스를 대상으로 시설정보관리시스템 개발을 위한 효과적인 업무분석과 시스템구성을 제안하는 것이다. 이를 위해서는 도시가스의 업무파악 및 사용자의 요구사항을 시스템에 반영하였으며, 기존 시설물관리시스템의 문제점을 파악하고 체계적인 시스템 개발을 유도하였다. 본 연구의 결과 업무분석시 사용자와의 계속적인 면담과정을 통해 기존 업무를 효과적으로 전산화 시킬 수 있었으며, 경영정보시스템(MIS)과 지리정보시스템(GIS)을 통합한 SI(System Integrate)측면에서 접근하는 것이 바람직한 것으로 나타났다. 그리고 시스템 구성시에는 현재와 미래의 컴퓨터환경을 고려하여 클라이언트 서버(Client-Server)환경의 시스템 개발이 적합함을 알 수 있다.

• 한국태양에너지학회 논문집
• /
• 제30권5호
• /
• pp.93-99
• /
• 2010

Nucleate pool boiling experiments with constant heat flux condition were performed using pure R113 for various channel heights under saturated pool condition. A circular heater of 1mm diameter, with artificial cavity in the center, fabricated using MEMS technique and the high-speed controller were used to maintain the constant heat flux. Images of bubble growth were taken at 5,000 frames per second using a high-speed CCD camera. The bubble geometry was obtained from the captured bubble images. The effects of channel height on the bubble growth behaviors were analyzed as dimensional scales for the initial and thermal growth regions. The parameters for the bubble growth behaviors were bubble radius, bubble growth rate, and bubble shapes. These phenomena require further analysis for various surface angles, but this study will provide good experimental data with constant heat flux boundary condition for such works.