• 제목/요약/키워드: Circulation Rate

검색결과 709건 처리시간 0.029초

순환유동층에서 하부 루프실 형태 변화에 따른 고체순환 특성 비교 (Comparison of Solid Circulation Characteristics with Change of Lower Loop Seal Geometry in a Circulating Fluidized Bed)

  • 이동호;조성호;진경태;이창근;류호정;박승빈
    • Korean Chemical Engineering Research
    • /
    • 제52권4호
    • /
    • pp.522-529
    • /
    • 2014
  • 연소전 $CO_2$ 포집용 SEWGS 시스템의 SEWGS 반응기와 재생반응기 사이의 고체순환을 위해 SEWGS 반응기 - 하부루프실 - 재생반응기 - 상승관 - 사이클론 - 상부 루프실로 구성된 순환유동층 시스템을 사용하고 있다. 현재 시스템의 경우 수직형 하부 루프실을 사용하고 있으나 하부 루프실의 유동화 및 안정적인 고체순환을 위해 유량이 많이 필요하고 가끔씩 슬러그가 발생하였다. 본 연구에서는 새로운 하부 루프실 형태로 경사형 하부 루프실을 제안하였으며, 상온, 상압 조건에서 $CO_2$ 흡수제(P-78)를 층물질로 사용하여 기포유동층-기포유동층-고속유동층 형태의 순환유동층 실험장치를 이용하여 하부 루프실의 형태 변화에 따른 고체순환특성을 측정 및 비교하였다. 경사형 하부루프실의 경우가 수직형인 경우보다 적은 유량으로 안정적인 고체순환을 유지할 수 있었으며 두 반응기 사이의 고체층 높이 차이도 발생하지 않는 것으로 나타나 경사형 하부 루프실을 사용하는 것이 유리한 것으로 결론지을 수 있었다.

부산지역 공공도서관의 빅데이터 분석 연구 - 도서관 정보나루 장서/대출데이터를 중심으로 - (A Study on Big Data Analysis of Public Library in Busan: Based on the Library Collection/Circulation Data)

  • 이순영;이수상
    • 한국문헌정보학회지
    • /
    • 제55권4호
    • /
    • pp.89-114
    • /
    • 2021
  • 본 연구는 학계와 현장의 도서관 빅데이터 관련 움직임을 살펴보고 이를 토대로 도서관 빅데이터 플랫폼인 도서관 정보나루의 장서/대출데이터를 대상으로 기초 분석을 수행하였다. 이를 위해 도서관과 빅데이터에 관한 선행연구와 활용사례를 참고하여 연도별 장서증가량, 주제별 장서구성비, 미대출 장서구성비, 주제별 장서회전율, 그리고 주제별 이용계수의 5가지 분석지표를 선정하였다. 분석에 사용된 도서관 데이터는 부산지역 33개 공공도서관의 장서/대출데이터 6,722,603건이다. 주요한 분석 결과는 다음과 같다. 첫째, 33개 공공도서관 간 장서수보다 대출수의 격차가 큰 것으로 나타났다. 둘째, 연간 장서증가량도 뚜렷한 하락세를 보였다. 셋째, 소장 장서의 주제별 구성과 미대출 장서의 주제별 구성에 있어서 각 도서관들이 비슷한 양상을 나타냈다. 넷째, 이용자들의 대출은 주제별, 도서관별로 매우 상이한 것으로 나타났다. 다섯째, 대부분의 도서관에서 자연과학 분야 장서회전율과 이용계수가 가장 높게 나타났다.

개선된 플라즈마 공정을 이용한 Ralstonia Solanacearum 불활성화에 관한 연구 (A Study on the Ralstonia Solanacearum Inactivation using Improved Plasma Process)

  • 김동석;박영식
    • 한국환경과학회지
    • /
    • 제23권3호
    • /
    • pp.369-378
    • /
    • 2014
  • Effect of improvement of the dielectric barrier discharge (DBD) plasma system on the inactivation performance of bacteria were investigated. The improvement of plasma reactor was performed by combination with the basic plasma reactor and UV process or combination with the basic plasma reactor and circulation system which was equipped with gas-liquid mixer. Experimental results showed that tailing effect was appeared after the exponential decrease in basic plasma reactor. There was no enhancement effect on the Ralstonia Solanacearum inactivation with combination of basic plasma process and UV process. The application of gas-liquid mixing device on the basic plasma reactor reduced inactivation time and led to complete sterilization. The effect existence of gas-liquid mixing device, voltage, air flow rate (1 ~ 5 L/min), water circulation rate (2.8 ~ 9.4 L/min) in gas-liquid mixing plasma, plasma voltage and UV power of gas-liquid mixing plasma+UV process were evaluated. The optimum air flow rate, water circulation rate, voltage of gas-liquid mixing system were 3 L/min, 3.5 L/min and 60 V, respectively. There was no enhancement effect on the Ralstonia Solanacearum inactivation with combination of gas-liquid mixing plasma and UV process.

$TiO_2$ 광촉매반응을 이용한 수중의 은이온 제거에 관한 연구 (A Study on the Removal of Ag(I) in Water Using $TiO_2$ Photocatalysis)

  • 김현용;조일형;양원호;김민호;이홍근
    • 환경위생공학
    • /
    • 제15권2호
    • /
    • pp.58-64
    • /
    • 2000
  • The photocatalytic removal of Ag(I) in water by $TiO_2$ at a various conditions, which are initial Ag(I) concentration, circulation flow rate, $TiO_2$ dosage and methanol concentration, was studied. A continuous flow system with a circular type reactor of the TiO2 suspensions with UV light through an photoreactor column was applied. The major results of this study were as follows; 1. First order kinetics was observed from the result at different initial concentration of Ag(I). As the initial Ag(I) concentration was incereased, the reaction rate was decreased. 2. The removal efficiency of Ag(I) increased with increasing the circulation flow rate and $TiO_2$ dosage. However, over $4{\ell}/min$ of circulation flow rate and $1.5g/{\ell}$ of $TiO_2$ dosage, increasing of the efficiency reached a plateau. 3. The addition of methanol as hole scavenger enhanced the removal efficiency of Ag(I) but the removal efficiency reached a plateau over some level of methanol. 4. It was found that $TiO_2$ photocatalysis was effective method to remove of Ag(I) from aqueous solution.

  • PDF

전시동선의 이동특성에 관한연구-박물관 환경디자인에 관한 기초적 연구(4)- (A Study on the Characteristics of Visitor's Movement in Exhibition Circulation -A basic Study on the Environmental Design of Museum(4)-)

  • 임채진;박종래
    • 한국실내디자인학회논문집
    • /
    • 제17호
    • /
    • pp.187-195
    • /
    • 1998
  • The purpose of this study is to analyze the characteristics of exhibition circulation which is caused by behavioral factors of visitor's movement and spatial factors in museums. It looks into the factors under the influence with the visitor's movement. The consideration of exhibition circulation may be classified into 2 categories. one is spatial factors which can make a exhibition circulation according to the extent of exhibition space display density position of exit display style and display secenario. and another is the behavioral factors of visitor's movement according to the time speed proportion of appreciation and visiting rate. The method of analysis is statistics of investigation by following after visitors. Through this data we found out that there are correlation with two categories. Therefore each factor that makes an exhibition circulation with organic relevancy have influence on the visitor's movement directly. So appropriate to the planning of each factor can offer visitors to more effective environment of exhibition.

  • PDF

ECMO 시스템 적용을 위한 최적화 조건에 관한 연구 (A study on the Optimal Condition for Application with Extracorporeal Membrane Oxygenation)

  • 김재열;송민종;유신;마상동;김창현
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 기술교육위원회 창립총회 및 학술대회 의료기기전시회
    • /
    • pp.13-18
    • /
    • 2001
  • The ECMO system, including umbilical cord and membrane type oxygenator was connected with extracorporeal circulation unit, was applied to the fetus growth model of goat. The maximum survival time of goat fetus was 48 hours. Average blood rate for the extracorporeal circulation was $223{\pm}15.2 ml/min.$ The survival time of fetus was deeply related to body temperature, blood circulation and water temperature, anesthetized time, and fetus weights. Extern variables that are composed of anesthetized time, fetus weights, change of hemoglobin, circuit pressure, related to the survival time for fetus corrected the problem of previous ECMO model that is controlled by roller pump. It is directly delivered to heart on load. Applying the results from new ECMO model, further research will provide to the system of ECMO for human.

  • PDF

인간형 로봇 내부의 다중 열원에 대한 수냉식 냉각판의 성능 (Performance of Liquid-Cooled Cold Plates for Multiple Heat Sources in a Humanoid Robot)

  • 강상우;김서영;문종민;황규대;리광훈
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회B
    • /
    • pp.2053-2058
    • /
    • 2008
  • It was investigated thermal performances on two array types of a serial circulation and a two-way parallel circulation for six water-cooled cold plates covered with non-metallic material (polycarbonate, PC) to reduce weight of the cooling devices for humanoid robot cooling. Six cold plates attached on $10{\times}10\;mm^2$ copper base : $0.5{\times}0.5\;mm^2$ pin-finned surfaces of 1.5 mm high with 0.5 mm array spacing, was mounted on six copper heating blocks with isothermal conditions of $50{\sim}90^{\circ}C$, respectively. In order to compare thermal characteristics according to two circulation types, the surface temperatures of heating blocks and the cooling water temperatures at inlets and outlets of cold plates were measured. From the results, it was found that a two-way parallel circulation was better performance than a serial circulation in terms of total thermal resistance, total heat transfer rate, and surface temperature rises from $1^{st}$ heating block to last one for six multiple cold plates.

  • PDF

콴다효과를 응용한 플랩이 달린 고양력 날개장치에 대한 실험적 연구 (An Experimental Study of Coanda Effect on the Flapped Control Surfaces)

  • 안해성;김효철
    • 대한조선학회논문집
    • /
    • 제40권5호
    • /
    • pp.10-16
    • /
    • 2003
  • To investigate the jet effect on circulation control, a segment of model was prepared and inserted horizontally across the test section of the cavitation tunnel. The hydrodynamic forces acting on the model were measured under the 2 dimensional flow behavior. Circulation flow control requires higher flow rate of water jet than boundary layer control does. Jet injection is effective in increasing lift coefficient and the increments reach to 160% in a certain combination of parameters such as an angle of attack, jet flow rate and flap angle. The blown water jet not only reduces form drag but also thrust effect, which is sometimes greater than the form drag in specific conditions.

프로세스 시뮬레이션에 의한 제 2종 흡수식 열펌프 성능에 관한 연구 (A Study on the Performance of an Absorption Heat Transformer with Process Simulation)

  • 조승연;김영인
    • 대한설비공학회지:설비저널
    • /
    • 제16권3호
    • /
    • pp.295-304
    • /
    • 1987
  • The purpose of this study is to develop a computer model for simulating the water-lit hium bromide absorption heat transformer (AHT) Including all major components and to find the flexibility in operation. The effect of source hot water temperature, cooling water temperature, useful hot water flow rate, cooling water flow rate and evaporator circulation flow rate were investigated. The coefficient of performance (COP), temperature boost $({\Delta}T\;=\;T_A\;-\;Ti)$ and concentration variations can be predicted. The performance study indicates that the performance of AHT increases for the waste hot water temperature increasing and with a decrease of the cooling water temperature. The effect on performances of useful hot water flow rape is significant except on temperature boost. Also the effects on performance of cooling water flow rate and evaporator circulation flow rate are small. It is shown that the computer program is valuable to predict the performance of absorp-tion heat transformer units at various working corditions.

  • PDF

이류체 노즐을 이용한 유전체장벽방전 플라즈마 가스의 OH 라디칼 생성 향상 (Enhancement of OH Radical Generation of Dielectric Barrier Discharge Plasma Gas Using Air-automizing Nozzle)

  • 박영식
    • 한국환경과학회지
    • /
    • 제27권8호
    • /
    • pp.621-629
    • /
    • 2018
  • Many chemically active species such as ${\cdot}H$, ${\cdot}OH$, $O_3$, $H_2O_2$, hydrated $e^-$, as well as ultraviolet rays, are produced by Dielectric Barrier Discharge (DBD) plasma in water and are widely use to remove non-biodegradable materials and deactivate microorganisms. As the plasma gas containing chemically active species that is generated from the plasma reaction has a short lifetime and low solubility in water, increasing the dissolution rate of this gas is an important challenge. To this end, the plasma gas and water within reactor were mixed using the air-automizing nozzle, and then, water-gas mixture was injected into water. The dissolving effect of plasma gas was indirectly confirmed by measuring the RNO (N-Dimethyl-4-nitrosoaniline, indicator of the formation of OH radical) solution. The plasma system consisted of an oxygen generator, a high-voltage power supply, a plasma generator and a liquid-gas mixing reactor. Experiments were conducted to examine the effects of location of air-automizing nozzle, flow rate of plasma gas, water circulation rate, and high-voltage on RNO degradation. The experimental results showed that the RNO removal efficiency of the air-automizing nozzle is 29.8% higher than the conventional diffuser. The nozzle position from water surface was not considered to be a major factor in the design and operation of the plasma reactor. The plasma gas flow rate and water circulation rate with the highest RNO removal rate were 3.5 L/min and 1.5 L/min, respectively. The ratio of the plasma gas flow rate to the water circulation rate for obtaining an RNO removal rate of over 95% was 1.67 ~ 4.00.