• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.403-405
• /
• 1994

The dynamic behavior of circulating current cycloconverter and flywheel energy storage unit is the subject of this investigation. The system of this type can control of real and reactive power flow between flywheel-cycloconverter and power three phase network. In this paper, waveform level simulation indicates that power flow control of is possible and this system can be used to varible application.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.117-122
• /
• 2000

In these days, the pollution of marine environment near island at Korean coastal zone caused by the trash, human waste and livestocks excreta become series problem. One of the most economic and efficient way to prevent this pollution problem is to set up island circulating incineration system. In this paper, the results of feasibility study on the application of turtle boat hull form to the incinearting vessel has been summarized especially for the resistance and course keeping point of view.

• 열처리공학회지
• /
• 제10권4호
• /
• pp.232-236
• /
• 1997

A rectangular type circulating fluidized bed (CFB) with an internal nozzle and two partition walls was proposed. In this modified CFB, an internal nozzle and two slanted partition walls were additionally set in the riser. This cold mode apparatus was made of acrylic resin; the riser was 1500mm high and $1000{\times}1000mm^2$ in the cross sectional area, the internal nozzle was 200mm high and 10mm in the inner diameter, and the partition wall was 7mm thick. Glass beads of $91{\mu}m$ in the mean diameter were employed as bed materials. In the cold mode by using the proposed CFB with an internal nozzle, it was possible to change the particle hold up by changing the gas flow ratio of the nozzle to the total(Qn/Qt). It was found that the inflection point which devided the bed structure between the dense and the dilute phase in the riser varied with Qn/Qt.

• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.554-560
• /
• 1989

본 연구에서는 실제 운행시에 발생할 수 있는 최악의 경우를 모든 반기의 무게를 집중질량으로 고려한 충실한 해석을 통하여 구해보고자 하였다. 이를 위하여 하나의 구간에 여러 개의 집중질량이 달린 경우에 대한 선로방정식을 유도하였고, 최소반력을 구하기 위한 문제를 최적설계 문제로 정의한 다음, 이를 체험적 최적설계 기법(heuristic optimization technique)을 통하여 해결하였다. 또한 예재해석을 통하여 최악의 상태가 발생하게 될 일반적인 조건을 구하였다.

• 전기학회논문지
• /
• 제60권3호
• /
• pp.531-537
• /
• 2011

This paper proposes a finite element method (FEM)-based model of an interior permanent magnet (IPM) type BLDC motor having stator inter-turn faults. For more realistic simulation studies, the magnetic non-linearity is also considered in proposed model. And the simulation data are verified through experiment. By integrating the developed model with a current-controlled voltage source inverter (CCVSI) model, the characteristics of an inter-turn fault operated by six-switched inverter are investigated considering the speed control. And the circulating current, which is induced by magnetic linkage flux originated from PM, was analyzed from the view point of distortion of air-gap magnetic flux distribution caused deterioration of their torque.

• Journal of Power Electronics
• /
• 제2권4호
• /
• pp.278-287
• /
• 2002

A novel zero-voltage and zero-current switching PWM DC-DC converter with lowered conduction losses is presented in this paper. A new double two-switch forward high frequency transformer type soft-switching converter topology is developed to minimize circulating currents occurs during freewheeling period. This converter has advantages as less number of the components, simple control principle under constant operation frequency, free of transformer Imbalance effect. The principle of operation is illustrated with steady-state analysis. Moreover, the effectiveness of the proposed converter topology is verified by implementation of a 500w-100kHz breadboard using IGBTs.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.63-69
• /
• 2011

Hull forms for catamaran type small fishing boat powered by electric motor are newly developed by experimental approaches. Model tests for two hull forms having different length are made at circulating water channel. Resistance performance and wave patterns are compared to carry out an analysis of the effect of extension of main body. The results show that the extension of main body can give better resistance performance above a certain velocity.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.755-760
• /
• 2006

The exhaust gas with solid particle goes through the riser in both particle circulating type and circulating fluidized bed type heat exchanger to recover the heat. During heat transfer, gas velocity in vertical riser decreases as viscosity of exhaust gas decreases. In this case, when the particle size is fixed, sometimes the exhaust gas happens to have lower velocity which prohibit them to go out of the riser. In this paper the particle motion in vertical Rayleigh flow was studied. The behavior of heat transfer was investigated by means of velocity and temperature distribution. The result from numerical analysis was validated by the experimental results. Fortran code was used to analyze the particle motion in vertical Rayleigh flow.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.447-449
• /
• 2013

• Korean Chemical Engineering Research
• /
• 제52권4호
• /
• pp.522-529
• /
• 2014

연소전 $CO_2$ 포집용 SEWGS 시스템의 SEWGS 반응기와 재생반응기 사이의 고체순환을 위해 SEWGS 반응기 - 하부루프실 - 재생반응기 - 상승관 - 사이클론 - 상부 루프실로 구성된 순환유동층 시스템을 사용하고 있다. 현재 시스템의 경우 수직형 하부 루프실을 사용하고 있으나 하부 루프실의 유동화 및 안정적인 고체순환을 위해 유량이 많이 필요하고 가끔씩 슬러그가 발생하였다. 본 연구에서는 새로운 하부 루프실 형태로 경사형 하부 루프실을 제안하였으며, 상온, 상압 조건에서 $CO_2$ 흡수제(P-78)를 층물질로 사용하여 기포유동층-기포유동층-고속유동층 형태의 순환유동층 실험장치를 이용하여 하부 루프실의 형태 변화에 따른 고체순환특성을 측정 및 비교하였다. 경사형 하부루프실의 경우가 수직형인 경우보다 적은 유량으로 안정적인 고체순환을 유지할 수 있었으며 두 반응기 사이의 고체층 높이 차이도 발생하지 않는 것으로 나타나 경사형 하부 루프실을 사용하는 것이 유리한 것으로 결론지을 수 있었다.