• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1307-1311
• /
• 2007

Three-dimensional transient keyhole profile is numerically analyzed for the case of stationary laser keyhole welding. Volume of fluid (VOF) method is adopted to track the free surface of molten metal based on the three governing equations which are continuity, momentum and energy equations. Multiple reflections of laser beam at the keyhole walls are also included in analysis through a real-time ray tracing technique. In this simulation, especially, polarization of laser is considered as an energy absorption mechanism following the Fresnel reflection theory. Both cases of linearly and circularly polarized beam are simulated and compared. The results show that the theoretically generated keyhole is asymmetrically stretched along the direction of polarization which is already observed experimentally before.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.3
• /
• pp.345-354
• /
• 2009

A stepped septum polarizer has been designed and fabricated for the 43 GHz band KVN receiver system. The dual-circular polarizer converts left and right hand circularly polarized signals into linear polarizations in two separated rectangular waveguides. Measurements show that the performance of the designed septum polarizer covering 42-48 GHz frequency band is adequate to meet the requirement of KVN receivers. Especially, a polarizer for the KVN receiver of 85-95 GHz frequency band can be fabricated by scaling the dimensions of the septum polarizer developed in this paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.119-123
• /
• 2000

This paper described a design for microstrip antenna with EMC cross dipole for circular polarization. To realize the wide bandwidth and circular polarization, the elertromagnetic-coupled cross dipole are used. The calculated axial ratio is about 0.1 dB in the main bean direction at 12 GHz and the circular polarization is realized.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.715-718
• /
• 2002

TX/RX dual microstrip 1$\times$8 sub-array antennas are designed, fabricated, and measured for a wideband array antennas in communications. They have a Right Handed Circular Polarization (RHCP) for TX from 7.9 to 8.4 GHz and Left Handed Circular Polarization (LHCP) for RX from 7.25 to 7.75 GHz. Two stacked patches are used for a wideband characteristics and cornertruncated square patches are adopted for a circular polarization. To enhance bandwidth characteristics of a circular polarization, 1$\times$2 sequential rotation arrays are applied. From the measured results, 1$\times$8 microstrip sub-array antennas have a good agreement with those of the simulation. Therefore the sub-array antennas are applicable to satellite communication antennas, active phased array antennas, and radiators in other antennas.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.461-466
• /
• 2004

In this paper, the novel patch antenna for polarization diversity using switching element is presented. The proposed antenna consists of the square patch with a pair of truncated corners and a microstrip-feed line with power divider. A switching microstrip-line feed works at schottky diode ON / OFF that is placed at $\lambda$/4 point from branch-off point of power divider. Polarization diversity has two types(LHCP. RHCP) as switching the schottky diodes. The measured 3 ㏈ axial ratio bandwidth for switching operation is about 2 %.

• Journal of Magnetics
• /
• v.20 no.4
• /
• pp.360-365
• /
• 2015

Spatial distributions of magnetic flux density in a newly designed magnetized inductively coupled plasma (M-ICP) etcher were investigated. Radial and axial magnetic flux densities as well as the magnetic flux density on the center of the substrate holder were controllable by placing multiple circular coils around the etcher properly. The plasma density non-uniformity in M-ICP (25 Gauss) can be reduced (1.4%) compared to that in ICP (16.7%) when the neutral gas pressure was 0.67 Pa and a right-hand circularly polarized wave (R-wave) can be propagated in to the etcher by making magnetic flux density increases both radially and axially from the center of the substrate holder.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.158-159
• /
• 2000

광원의 근처에만 존재하는 근접장(Near-field)이 먼장(Far-field)과는 매우 다른 특성을 보인다는 것은 널리 알려진 사실이다. 일반적으로 먼장은 횡파(transverse wave)이며 광원에서 멀어질수록 1/r의 함수로 그 세기가 감소하는데 반하여, 근접장은 시간의존항을 제외하고는 정적인 분포를 보이고(static), 종파(logitudinal wave)성분이 오히려 크며 광원의 미세구조에 직접 관련되어 있다. 이러한 근접장이 근접장 주사 광학현미경(Near-field Scanning Optical Microscopy)의 발전으로 인해 실험적으로 연구되기 시작하면서 여러 가지 예기치 못한 현상들이 발견되고 있다. 그중 하나로서, 원편광된 빛(Circularly polarized light)을 내는 광원의 근접장을 측정한 실험에서 광원에 접근할수록 원편광이 사라지는 현상이 실험적으로 보고된바 있다.$^{(1)}$ 본 발표에서는 Bethe의 모델과 다중극 장(Multipole field)의 근접장을 분석하여 고전전자기론 내에서 근접장의 각 운동량에 대해 논의한다. (중략)

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.218-222
• /
• 2009

In this paper, we report the optical and structural properties of a bilayer circular filter fabricated by a glancing angle deposition technique. The bilayer circular filter is realized by a two-layer $TiO_2$ helical film with layers of opposite structural handedness. It is found that the bilayer circular filter reflects both right and left circularly polarized light with wavelength lying in the Bragg regime. The microstructure of the bilayer circular filter is also investigated using a scanning electron microscope.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.459-463
• /
• 2003

A circularly polarized microstrip patch antenna (MPA) using electromagnetic (EM) coupled fed method is analyzed in view of the two types of coupling mechanisms viz. cavity and parasitic type, proposed earlier. The patch-ground plane distance is varied in order to achieve the fore-mentioned types of couplings. For each case of patch-ground plane distance, the offset position of feedline is optimized for perfect matching and the boresight axial ratio (AR) is observed. It is seen that CP operation is possible only for cavity-type coupling (smaller patch-ground plane distances). The simulated results for the boresight AR for the two types of coupling mechanisms are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1741-1746
• /
• 2001

This paper proposes the OFDM system that uses circularly polarized waves for improving the system performance. The circular polarization has the characteristic that it cannot receive the waves which are reflected by odd times. Using this characteristic, a modified OFDM system that uses the cross-handed circular polarization(XCP-OFDM) is newly proposed. By using the characteristic of circular polarization, it is clearly seen that the system performance of XCP-OFDM can be improved to a great extent. This is due to a reduction of the interferences caused by reflected waves and inter-channel interference. Both theoretical analysis and system simulation results are described.