• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.70-80
• /
• 2001

A cycloid reducer is one of the rotational velocity reduction equipments of machinery. It has advantages of the higher reduction ratio, the higher accuracy, the easier adjustment of transmission ratio and the smaller workspace than other kinds of reducer. A cycloidal plate gear is a main part of the cycloid reducer. Its tooth shape is peculiar because of gearing with the roller gear that has the several rollers on the circular line. And then it can be designed to contact all teeth to rollers. So, the cycloid reducer has the good characteristics in the dynamic properties and the zero-backlash in the contact motion. It can be used in robots, high-precision machines and high capacity machinery. This paper proposes a new approach for the shape design of the cycloidal plate gear and presents a Computer-Aided-Design program developed by the proposed method. The first part of this paper defines the two types of the cycloid reducers and explains their mechanisms. The second part defines the instant velocity centers for each type of the cycloid reducers and calculates the contact angles and the contact points by using te geometric relationships and the kinematical properties of the reducers. The third part generates the full shape of the cycloidal plate gear by the coordinate transformation technique. Finally, this paper presents two examples for the shape design of the cycloidal plate gear in order to prove the theory of the proposed method in this paper and the accuracy of the \"CycloGear Designer\".

• 대한치과보철학회지
• /
• 제30권1호
• /
• pp.25-42
• /
• 1992

The purpose of this study was to analyze the magnitude and distribution of stress using a photoelastic model from a unilateral distal extention removable partial dentures with five kinds of the direct retainers, that is, the bilaterally designed bar clasp of the cross-arch lingual bar and the unilaterally designed bar clasp, circumferential clasp, mini-Dalbo attachment, and telescope retainer. A photoelastic model for mandible was made of the epoxy resin(PL-1) and hardner (PLH-1) with the acrylic resin teeth used and was coated with plastic cement-1 at the lingual surface of the model, and then five kinds of removable partial dentures were set, A unilateral vertical load of about 16Kg was applied on the first molar and the stress pattern of the photoelastic model under each condition was analyzed by the reflective circular polariscope. The following results were obtained: 1. The conventional removable partial denture with the bilaterally cross arch lingual bar produced the most favorable stress distribution on the residual ridge and supporting structure of abutment teeth than the unilaterally designed removable partial dentures. 2. The unilaterally designed removable partial denture with the bar clasp produced the stress distribution on the residual ridge, except sligtly higher stress concentration on the supporting structure of the abutment teeth, similar to the conventional removable partial denture with the bilaterally designed cross arch lingual bar. 3. On the unilaterally designed removable partial dentures, the bar clasp produced greater stress distribution on the residual ridge and supporting structure of the abutment teeth than the circumferential clasp. 4. On the unilaterally designed removable partial dentures, the mimi-Dalbo attachment produced relatively higher stress concentration on the residual ridge, but produced lesser stress concentration on the supporting structure of the abutment teeth than the other direct retainers. 5. On the unilaterally designed removable partial dentures, the telescope retainer produced uniform stress distribution on the residual ridge, but produced higher stress concentration at the root apex of the terminal abutment tooth than the other direct retainers. 6. On the unilaterally designed removable partial dentures the circumferential clasp and telescope retainer produced slightly higher stress concentration on the residual ridge and supporting structure of the abutment teeth than the bar clasp and mini- Dalbo attachment.

• 대한소아치과학회지
• /
• 제44권3호
• /
• pp.289-297
• /
• 2017

전신적 또는 국소적 요소에 의하여 유치 치근이 병적으로 흡수될 수 있으며 치아 우식증이나 외상 등으로 염증성 치근 흡수가 발생할 수 있다. 유치의 병적 치근 흡수면은 생리적인 치근 흡수와 비교할 때 흡수면의 세포와 흡수와의 형태 등의 흡수 양상이 다르다. 이 연구는 생리적 치근 흡수, 외상, 염증성 치근 흡수면의 형태 및 인접한 세포를 주사전자현미경과 광학현미경으로 관찰하였다. 생리적 치근 흡수면의 흡수소와는 원형과 타원형이고 비교적 작고 균일하였다. 외상으로 인한 치근 흡수면과 염증성 치근 흡수면의 흡수소와는 생리적 치근 흡수면의 흡수소와에 비해 다각형이며 크고 불규칙하였다. 생리적 치근 흡수면과 외상으로 인한 치근 흡수면, 염증성 치근 흡수면에서 다핵거대세포와 단핵세포가 관찰되었으며 염증성 치근 흡수면에서는 간엽세포 및 염증세포가 많이 분포되어 있었다. 생리적 치근 흡수면과 외상으로 인한 치근 흡수면에서는 흡수 표면에 백악질양 조직이 침착되었으나, 염증성 치근 흡수면에서는 관찰되지 않았다.

• 대한치과보철학회지
• /
• 제32권4호
• /
• pp.526-552
• /
• 1994

The extent and direction of movement of removable partial dentures during function are influenced by the nature of the supporting structures and and the design of the prosthesis. Since forces are transmitted to the abutment teeth through occlusal rests, guide planes and direct retainers during functional movements, proper design based on the avaialble research data will maintain the health of abutment teeth and their supporting structures. The purpose of this in vitro study is evaluating stress distribution clinically around the abutment teeth prepared following 4-type clasping systems for unilateral free-end removable partial dentures. Three-Dimensional Photoelastic Stress Analysis method was used because it shows a visual display of stresses of the simulated abutment teeth and residual ridges and reveals stress concentration that can be read at any given points in terms of direction and magnitude. For this study, the author fabricated 4 mandibular photoelastic epoxy models missing left 1st and End molar. Epoxy models were duplicated and 4 unilateral removable partial dentures were construe- ted in accordance with 4-type direct retainers. Unilateral free-end removable partial dentures were positioned on their own models. 6kg force was loaded on the every removable partial dentures of the epoxy model on the central fossa of mandibular left 1st molar vertically by the loading device. After the stress was frozen in a stress freezing furnace, 6 specimens of 6-mm thickness were made from every epoxy model and examined with the circular polariscope. The results were as follows : 1. Generally I-bar clasp revealed the most favorable stress distribution around the abutment teeth. 2. At the end portion of the free-end ridge, Back action clasp showed the highest stress concentration at the bucco-lingual and top portions of the residual alveolar ridge. 3. At the distal area of the abutment teeth, Akers clasp and Roach clasp showed higher stress concentration bucco-lingually and apically than the others. 4. To the abutment tooth, I-bar clasp showed the least stress distribution bucco-lingually but the others showed irregular stress distribution. 5. At the mesial area of the abutment teeth, the order of effective stress distribution was I-bar clasp, Back-action clasp, Akers clasp and Roach clasp. There was big difference of stress distribution between them. 6. At the right 2nd premolar and 1st molar, the stress concentration of Akers clasp was a little high but that of I-bar clasp was low.

• 대한치과교정학회지
• /
• 제31권6호
• /
• pp.559-566
• /
• 2001

본 연구는 설측 이소맹출된 하악 제2대구치의 협측 반대교합을 개선하기 위해 사용되는 mandibular posterior crossbite appliance에 의해 하악 제2대구치의 치근단과 그 주위의 치조골에 발생되는 응력분포를 알아보기 위해 광탄성법을 이용하여 분석하였다. 하악의 치조골을 재현하기 위해 PL-3 형의 epoxy resin과 PL-3 보다 경질인 레진치아를 사용하여 설측 이소맹출된 하악 제2대구치를 광탄성모형으로 재현하였다. 광탄성 모현상에 mandibular posterior crossbite appliance를 적용하고 힘을 가하기 전과후의 응력 분포를 알아보기 위해 원형편광기 를 사용하여 모형의 전후방에서 관찰하였다. 이상의 연구를 통해 얻어진 결과는 다음과 같다. 1. 하악 제2대구치의 협측면에 힘을 가한 경우, 설측 치조정과 치근첨 부위에 응력이 집중되어 나타났고 회전중심이 치근 협측면의 중간 1/3부위와 치근첨 부위에 발생하였으며 이로 인해 제 2대구치에 협측으로의 비조절성 경사이동 및 회전력이 발생하였다. 2. 하악 제2대구치의 설측면에 힘을 가한 경우에는 협측면에 힘을 가한 경우 보다 치근첨에 더 많은 응력이 발생하였다. 또한 치근하방의 치조골 부위에 응력이 증가하였으며 치근의 협측면과 치근첨 부위의 회전중심도 없어져 이로 인한 협측으로의 조절성 경사 이동 및 함입력이 관찰되었다. 3. 하악 제2대구치의 협측이나 설측에 힘을 가한 경우, 고정원인 제1대구치의 치근첨 부위는 힘을 가하기 전의 초기 응력상태와 비교할 때 응력의 증가는 보이지 않아 구치부 협측 반대 교합의 개선시 하악의 설측 호선은 효과적인 고정원으로 사용될 수 있다. 이상의 연구 결과는 설측 이소맹출된 하악 제2대구치의 구치부 협측 반대교합을 개선하기 위해 사용되는 mandibular posterior crossbite appliance를 적용할 때, 제2대구치의 협측면보다는 설측면에서 힘을 부여하는 것이 교합장애를 야기시킬 수 있는 비조절성 경사이동과 구치의 회전을 피하면서 협측으로의 조절성 경사이동 및 함입력을 적용시킬 수 있음을 의미한다.