• 대한기계학회논문집
• /
• 제16권6호
• /
• pp.1150-1155
• /
• 1992

본 연구에서는 제철소 열연공정의 냉각효율 개선을 위한 기초연구로 수행되었 다. 전열면의 초기온도가 900.deg. C이상일 때 층류 냉각방식에 의한 고온강판의 냉각특 성에 영향을 주는 모든 인자를 엄밀히 고려하는 것은 매우 어려운 일이다.따라서 본 연구에서는 노즐과 고온면 사이 거리(L), 유량(Q), 냉각 초기온도 등을 실제 작업 조건에 가깝게 변화시켜 가면서 수냉반경의 변화를 중심으로 전열면의 냉각 특성을 해 석하였다.

• 대한설비공학회지:설비저널
• /
• 제17권6호
• /
• pp.708-716
• /
• 1988

Local heat transfer coefficients were measured on semi-cylinders on which a circular water jet impinged in crossflow. The ratio of the semi-cylinder's diameter and the nozzle outlet diameter were varied parametrically, as were the Reynolds number and the supplementary water heights. The measurements showed that the circumferential distribution of the heat transfer coefficient peaked at the stagnation point. For a fixed supplementary water height, the peak heat transfer coefficient was not depend on the curvature of test specimen(d/D). Optimum height of supplementary water which brought about the augmentation of heat transfer at the stagnation point was S/D=1. The Nusselt number decreased as the circumferential distance or angle increased. The circumferential distribution of dimensionless heat transfer (Nu/Nus) was independent of d/D ($d/D{\geq}8.33$), but for the d/D<8.33, it was depended on d/D. At a fixed angle of specimen, dimensionless heat transfer (Nu/Nus) decreased as the ratio d/D increased. The extent of the decrease between d/D=6.67 and 8.33 was markedly greater than that between d/D=8.33 and 10, or d/D=10 and 11.67.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.639-644
• /
• 2000

An experiment on the enhancement of turbulent flow with ultrasonic forcing was carried out by using PIV measurement in a coaxial circular pipe which could offer characteristics of the turbulence flow plentifully through its jet. A large transparent acryl tank and a coaxial circular pipe nozzle were made for the above research. city water of $25^{\circ}C$ was selected as an experimental liquid and the front flow field of the coaxial circular pipe was divided vertically as 3 measuring regions to observe characteristics of flow phenomena. characteristics of fluid flow such as velocity vector distribution, kinetic energy, turbulent intensity and etc. were visualized, observed, examined and considered at 5 kinds of Re No. such as $Re=1{\times}10^3,\;2{\times}10^3,\;3{\times}10^3,\;5{\times}10^3,\;1{\times}10^4$. In result it was proved that ultrasonic vibration affected the enhancement of turbulent flow.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.774-778
• /
• 2004

The atomization process of a circular $SF_{6}$ liquid jet issued into an otherwise quiescent, high-pressure $N_2$ gas was observed to explore the breakup mechanism of liquid ligaments involved in turbulent atomization. Both liquid and gas temperatures were fixed at a room temperature but the gas pressure was elevated to more than twice the critical pressure of $SF_{6}$. Therefore, the liquid surface was in a thermodynamic state close to a critical mixing condition with suppressed vaporization. Since the surface tension and the surface gas density approach zero and the surface liquid density, respectively, phenomena equivalent to those which would appear when a very high speed laminar flow of water were injected into the atmospheric-pressure air can be observed by issuing $SF_{6}$ liquid at low speeds in micro-gravity environment which avoid disturbances due to gravity forces. The instability ob near-critical mixing surface jet was quantitatively characterized using a newly developed device, which could issue a very small amount of $SF_{6}$ liquid at small constant velocity into a very high-pressure $N_2$ gas.

• 한국가시화정보학회지
• /
• 제9권4호
• /
• pp.47-53
• /
• 2011

A water driven ejector loop was designed and constructed for air absorption. The used ejector was horizontally installed in the loop and annular water jet at the throat entrained air through the circular pipe placed at the center of the ejector. Wide range of water flow rate was provided using two kinds of pumps in the loop. The tested range of water flow rate was 100${\ell}$ /min to 1,000 ${\ell}$/min. Two-phase flow inside the ejector loop was simulated by CFD analysis. Homogeneous particle model was used for void fraction prediction. Water and air flow rates and pressure drop through the ejector were automatically recorded by using the LabView based data acquisition system. Flow characteristics and air bubble velocity field downstream of the ejector were investigated by two-phase flow visualization and PIV measurement based on bubble shadow images. Overall performance of the two-phase ejector predicted by the CFD simulation agrees well with that of the experiment.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1784-1793
• /
• 2001

The flow fields around an elliptic cylinder of axis ratio AR=2 adjacent to a free surface were investigated experimentally using a water channel. The main objective is to understand the effect of the free surface on the flow structure in the near-wake. The flow fields were measured by varying the depth of cylinder submergence, for each experimental condition, 350 velocity fields were measured using a single-frame PIV system and ensemble-averaged to obtain the spatial distribution of turbulent statics. For small submergence depths a large-scale eddy structure was observed in the near-wake, causing a reverse flow near the free surface, downstream of the cylinder. As the depth of cylinder submergence was increased, the flow speed in the gap region between the upper surface of the cylinder and the free surface increased and formed a substantial jet flow. The general flow structure of the elliptic cylinder is similar to previous results for a circular cylinder submerged near to a free surface. However, the width of the wake and the angle of downward deflection of the shear layer developed from the lower surface of the elliptic cylinder are smaller tan those for a circular cylinder.

• 대한기계학회논문집B
• /
• 제26권6호
• /
• pp.779-787
• /
• 2002

The cooling heat transfer by impinging water spray jets on a rotating roll with a relatively large diameter has been investigated under various experimental conditions with 3 different sizes of flat type nozzle. The local heat transfer coefficients were calculated by finite difference method using measured surface temperatures of the circular cylinder as boundary conditions. Results show that a peak value of the heat transfer coefficient is located at the center of sprayed area and there may be a secondary peak at the downstream. The average heat transfer coefficients on the sprayed area were found to be 10 to 22 ㎾/$m^2$$^{\circ}C$, and were not related to spraying pressure, but approximately linearly to flow rate of sprayed water. Also it is found that increasing the distance from roll to nozzle could improve the cooling efficiency by increasing the sprayed area.

• 한국수자원학회논문집
• /
• 제38권5호
• /
• pp.365-377
• /
• 2005

본 연구는 수력발전시설에서 물고기의 생존과 상해를 유도하는 흐름현상을 파악하기 위한 진보된 수치해석기법의 개발을 다루고 있다. 원형 젤의 LES를 실시하여 난류젤의 전단지역에 물고기를 방류하는 실험의 결과를 수치적으로 해석하였다. 이 연구에서는 순간 LES 흐름장이 유속, 압력 그리고 와도의 강한 변동으로 특성지울 수 있으며, 이것이 물고기에게 시간평균 정상류보다 상당히 큰 추진력과 모멘트를 발휘함을 보여준다. 이 연구는 아울러 수력터빈 드래프트관에서의 부정류를 RANS/LES의 혼성모형 즉 DES를 이용하여 해석하였으며, 물고기가 드래프트관내에서 방향감각을 상실하거나 과도하게 지체하도록 할 수 있는 난류가 발생함을 보여준다.

• 태양에너지
• /
• 제15권1호
• /
• pp.53-71
• /
• 1995

형상비가 다른 3개의 사각노즐을 이용한 충돌 수분류가 등열유속 조건($q=10^5W/m^2$)으로 가열된 수평 평판에 충돌하였을 때, 형상비(AR=6.67, 15, 26.67)와 노즐의 출구 유속($V_0=3.3m/s{\sim}78m/s$) 및 노즐과 전열면과의 무차원거리($Z/W=6{\sim}40$)에 따른 열전달 특성을 규명하기 위한 실험을 하였다. 원형 수분류에서 나타난 제2의 열전달 극대치(scondary peaks)가 사각 수분류에서도 나타나고 있으며 그 위치가 형상비에 따라 변한다. 정체점의 열전달계수도 형상비의 영향을 받고 있으며, 정체점 열전달 게수가 가장 좋은 노즐의 최적위치와 정체점 열전달 무차원 관계식을 제시하였다.

• 대한기계학회논문집B
• /
• 제37권5호
• /
• pp.459-465
• /
• 2013

열연 판재 제조과정에서는 제품의 강도와 인성을 제어하기 위해 압연 직후 $800^{\circ}C$ 이상의 고온 소재를 수냉각 방식으로 급속 냉각시킨다. 이 과정에는 소재 표면과 냉각수 사이의 비등 열전달 현상과 소재 표면에 쌓이는 체류수의 자유표면 유동, 소재의 고속 주행 등 매우 복잡한 물리현상들을 포함하고 있다. 본 연구에서는 이 모든 물리 현상들을 수치적으로 모델링한 해석 모델을 적용하여 기본 열전달 해석을 수행한다. 실제로 소재는 냉각에 의해 내부에서 오스테나이트로부터 페라이트로 상변태가 일어나고 이로 인해 소재의 국부적인 열물성치의 변화가 발생하지만 본 연구에서는 상변태를 직접 푸는 방법 대신 이미 알려진 소재의 온도에 따른 물성변화 곡선을 이용하여 냉각해석을 수행하고 이를 기존의 일정 물성치 조건에서 해석한 결과와 비교하여 소재의 물성변화가 소재 냉각에 미치는 영향과 상변태 해석의 필요성에 대해 검토하였다.