• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.367-375
• /
• 2014

In this paper, a novel triple-band circular-ring monopole antenna with a half-circular ring and ground slot for wireless local area network/Worldwide Interoperability of Microwave Access (WLAN/WiMAX) applications is proposed. The proposed antenna consists of one circular ring, a half-circular ring and a rectangular slot in the ground plane. Based on the concept, a prototype of the proposed triple-band antenna was designed, fabricated and tested. The numerical and experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. Furthermore, this paper presents and discusses the 2D radiation patterns and 2D gains according to the results of the experiment.

• Journal of information and communication convergence engineering
• /
• v.12 no.1
• /
• pp.1-7
• /
• 2014

A novel design of a simple circular ring with open-ended monopole antenna for wireless local area network (WLAN) applications is proposed in this article. The proposed antenna consists of an open-ended circular ring and $50-{\Omega}$ microstrip feed-line. The proposed antenna is capable of generating two separate resonant modes with good impedance-matching conditions. A prototype of the proposed antenna is designed, fabricated, and measured. Acceptable agreement between the measurement and simulation results is achieved. Experimental results show that the proposed antenna has operating bandwidths of 1.99-3.04 GHz and 5.08-6.1 GHz with a return loss of less than -10 dB, covering the required bandwidths of the 2.4/5.2/5.8-GHz WLAN standards. This is a microstrip antenna for IEEE 802.11a/b wireless local area networks applications. Meanwhile, the two-dimensional (2D) radiation patterns and three-dimensional (3D) gain performance of the antenna are also observed and discussed.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.8
• /
• pp.448-454
• /
• 2004

In this paper, circular polarized antennas of Tx 30GHz and Rx 20GHz are implemented in LTCC process. Tx antenna has a circular patch structure and Rx antenna has a ring patch structure. The feeding line of Tx antenna is placed in the center hole of Rx ring patch antenna which is printed under Tx circular patch antenna layer. It makes antenna size smaller. Tx antenna's return loss in under -l0dB level from 30GHz to 31GHz and Rx antenna is under -10 dB from 20GHz to 21GHz. The isolation between two antennas is less than -20dB. Axial ratio is less than 3dB thoughout each band.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.2
• /
• pp.122-128
• /
• 2023

The target must be located within the main-lobe of the antenna in order to measure the direction of the target by using sum-delta monopulse technique. The most common way if the target is located within the main-lobe is to compare the amplitude of the sum channel received signal with the delta channel received signal. However, in the case of the single-ring circular array antenna, it is difficult to apply the conventional method due to its structural limitation where antenna elements do not exist in the center of the array. In this paper, we proposed a novel method to identify whether a target is located within the main-lobe by appropriately adjusting the feeding amplitude of each element constituting the single-ring circular array antenna through the particle swarm optimization method. Simulation results showed that the proposed method can determine whether the target is located within the main-lobe of the single-ring circular array antenna.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.7
• /
• pp.987-994
• /
• 2013

In this paper, a dual-band open-ended circular ring moNopole antenna for WLAN(Wireless Local Area Networks) applications. The proposed antenna is based on a planar moNopole design, and composed of open-ended one circular ring of radiating patches for dual-band operation. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that effect antenna characteristics. Using the obtained parameters, the proposed antenna is fabricated. The fabricated antenna is measured at the operating frequencies(2.4-2.484 GHz, 5.15-5.825 GHz), and the return loss coefficient, gain, and radiation patterns are determined.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.643-650
• /
• 2020

The phased array antenna has an advantage enabling rapid beam aim without the mechanical rotation of the antenna, because it arranges multiple elements in a linear or planer (grid or circular) and electronically controls the phase for each element. The planar array antenna is generally used a grid array and a circular array, and the circular form has the higher resolution comparing to the grid form due to the its structural characteristics. However, a concentric circular array (CCA) or a concentric ring array (CRA) with multiple circular arrays which each has different radius is used in the limited area, because the entire radius should be increased for the circular array with a number of elements. In this paper, we introduce the angle-of-arrival (AOA) estimator for an adaptive beamforming satellite system based on CRA and provide the simulation results for performance evaluation. In addition, simulation results are compared and analyzed to the case for the circular array antenna.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.2
• /
• pp.57-63
• /
• 2008

In this paper, we develop the Hipass antenna that is used in electronic tall-gate charging (ETC) system in Korea expressway. This antenna has circular polarized characteristics, and especially has 45 degree tilted beam properties. These properties are very effective in ETC communication between the vehicle antenna and the tall-gate antenna. To achieve these properties on a small microstrip type antenna structure, we propose a annular ring microstrip antenna with stubs. When the length and angle of stubs are changed, the direction of the circular polarized beam is generally tilted by $45^{\circ}$ in elevation angle. Especially, by using the stubs in inner area or outer area of ring antenna, it is found that the beam direction of in azimuth angle can be rotated.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.545-548
• /
• 2002

This paper proposes a unidirectional beam antenna using a probe excited circular ring near the reflector. The antenna structure is simple. The radiation characteristics of the antenna fur various spacing between a probe excited circular ring and the reflector are analyzed. These characteristics are also compared with the conventional single aperture near the reflector. It is found that the proposed structure yields better characteristics than the conventional structure. The numerical results of the radiation pattern, elevational beam peak, beamwidth, and maximum directivity are investigated. The result of the analysis is very useful to design the antenna of the high directivity with unidirectional beam.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.268-275
• /
• 2014

In this paper, a dual-band circular ring monopole antenna with stub and ground slot for WLAN(Wireless Local Area Networks)/WiMAX(World interoperability for Microwave Access) applications. The proposed antenna is based on a planar monopole design, and composed of one circular ring of radiating patch, cross strip in circular ring, modified feed line, and two rectangular slot in the ground plane for triple-band operation. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is fabricated. The numerical and experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. And characteristics of gain and radiation patterns are determined for WLAN/WiMAX application.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.4
• /
• pp.417-424
• /
• 2014

In this paper, a dual-band circular ring monopole antenna with semi-circular strip for WLAN(Wireless Local Area Networks)/WiMAX(World interoperability for Microwave Access) applications. The proposed antenna is based on a planar monopole design, and composed of half circular strip for dual-band operation which cover WLAN and WiMAX frequency bands. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is fabricated. The numerical and experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. And characteristics of gain and radiation patterns are obtained for WLAN/WiMAX frequency bands.