• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.235-240
• /
• 2005

This paper presents a dual band circularly polarized microstrip patch antenna. The antenna consists of two corner truncated patches implemented in one plane and single feed point. The input signal is directly excited to the patch 2 and the patch 1 is fed from patch 2 by coupling between two patches. The antenna is operated at 900 MHz and 2.45 GHz bands and has the right hand circularly polarized radiation pattern at all. The measured gains of the antenna are 2.95 dBic at 900 MHz band and 4.6 dBic at 2.45 GHz band.

• Journal of electromagnetic engineering and science
• /
• 제5권1호
• /
• pp.31-35
• /
• 2005

This paper presents low form factor dual polarized antenna incorporating low profile annular ring patch antenna having 90$^{\circ}$ phase delay element for circular polarization(CP) and a reactive-loaded monopole linear polarized(LP) antenna. Both types of receiving antennas operate in the same frequency region from 2.320 GHz to 2.345 GHz, while different polarizations are used to take advantage of polarization diversity. The proposed CP antenna has good broadside radiation patterns, while the LP antenna reveals monopole-like radiation patterns. The gains of the antennas are measured to be 1.93 dBi and 2.24 dBi for CP and LP, respectively.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.331-332
• /
• 2008

A horn antenna having dual-band and dualpolarization operation is proposed. To implement a small-sized structure providing circular polarizations in the Ka- and K-band, the antenna is designed by using the horn radiator on the basis of a conical helix which is exited by two ports for TX and RX in both ends. Through a design optimization process, a compactdual-band and dual-polarized horn antenna having high gain and high isolation performance was realized.

• ETRI Journal
• /
• 제31권5호
• /
• pp.506-509
• /
• 2009

A novel design of a compact square-ring slot microstrip antenna for achieving circular polarization (CP) operation is proposed and experimentally studied. By using an arrow-shaped slot structure as a radiating element, the resonant frequency of the proposed antenna is significantly lowered, which can lead to a large size reduction for fixed frequency operation. The CP radiation characteristics are achieved by loading with proper asymmetry, which can be placed diagonally. A prototype of the proposed design is implemented and its performance is measured. Measured results show that radiation patterns with good CP characteristics are obtained at the resonant frequency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제13권9호
• /
• pp.851-857
• /
• 2002

A two-arm microstrip spiral antenna with a circular aperture on the ground plane that generates a circularly polarized conical beam is presented in this paper. We obtained circularly polarized conical beam by using two spirals that are excited in-phase from the microstrip feed lines. The main beam directions of the conical beam from the broadside are approximately 40$^{\circ}$ in the range from 5 GHz to 6.5 GHz, and 58$^{\circ}$ from 9 GHz to 11 GHz. Since the proposed antenna has omni-directional conical beam pattern, it is suitable for use in mobile communication systems.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제6권3호
• /
• pp.101-110
• /
• 2007

This study has designed a circular polarization antenna for UHF bandwidth RFID reader. As a result of performance test of the antenna designed it is found that return loss (S11) is about -45.529dB at 914MHz, which is relatively small, and antenna gain is about 6.09dBi. It has also been confirmed that $50{\Omega}$ impedance matching is about $50.48{$\Omega}$ and it can be applied to every RFID reader. Therefore, the antenna is designed to have higher gain of circular polarization by improving reception, which is one of the most important parameters of RFID reader and is expected to be extensively used to recognize multi-tag in the distance.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
• /
• pp.369-373
• /
• 2000

This paper describes a design for microstrip EMC cross dipole array antenna with circular polarization. To realize the wide bandwidth and circular polarization, the electromagnetic-coupled cross dipole is used. To obtain the uniform aperture illumination, offset technique for array is adopted. In 20-element array design, the calculated axial ratio and gain are about 0.1 dB and 9.9 dBi at 12GHz, respectively. The frequency characteristics of a fabricated 20-element array antenna are measured. The calculated results agree well with the measured ones.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.231-234
• /
• 2005

In this paper, Dual-polarized Tx/Rx antenna for RFID reader is designed and fabricated to apply to RFID reader. Each feeding network of Tx/Rx is designed to improve the port-isolation and cross-polarization, and sequential rotation feeding scheme has been applied to increase of axial ratio bandwidth. Measured results show that 2.35dBi of antenna gain in 900MHz$\sim$928MHz, 150MHz of 3dB axial ratio bandwidth, -38dB$\sim$-40dB of port-isolation, and -30dB$\sim$-40dB of cross-polarization.

• Journal of electromagnetic engineering and science
• /
• 제5권3호
• /
• pp.132-139
• /
• 2005

Wireless bio-signal sensing system, which is based on the principle of Doppler radar, can measure a respiration and heart rates with a periodic movement of skin and muscle near the heart. Though the sensing monostatic system using a circulator has been studied, this bistatic system can be improved by using a circular polarized antenna which has a high isolation between transmitter and receiver. In this paper, we measured the bio-signal without the direct contact with the person. The design of each system and experimental results are discussed.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제4권1호
• /
• pp.124-136
• /
• 2001

In this paper, we designed and manufactured the Ku-band circular waveguide antenna to do wireless communication with a ground radar as on-board antenna of missile. Using the MATLAB and the HFSS, we designed the circular polarizer which has a characteristic of circular polarization and broadband using the capacitive pin method, the feeder to feed coaxial line to circular waveguide, and a stopper to prevent a conductor material from being inserted. Then we simulated the designed antenna using the HFSS, obtained the gain and the radiation pattern. Because of a difficulty of manufacture, we established a manufacture process procedure. Antenna is manufactured with this procedure, test results of the manufactured antenna are the axial ratio of 1.37 ~ 1.72, the 3 ㏈ beamwidth of $72.23^{\circ}{\sim}78.54^{\circ},$ and the gain of 3.26 ~ 4.61 ㏈ within frequency band. We knew that these results are similar with simulation results. Also, we confirmed that the manufactured antenna is satisfied with requirement conditions through performance test, environmental test and flight test.